Categories

Best Non threaded J bolts

LotFancy Adjustable Battery Hold Down, Universal Battery Bracket with J Hook, Battery Tie Down Kit, 9.1inch (23cm) Bolt Length

  • Adjustable: Bolt length: 9.1inch (23cm). 3.74inch long thread for height adjustment. Adjustable cross-bar expands from 5.7" to 8.5" wide. Thread size: 1/4"-20 UNC. Please confirm your battery size before purchasing.
  • High Quality: This car battery hold down is made of premium iron, sturdy and available for long service life. The surface is anodized for enhancing its corrosion and rust resistance.
  • J Hook: Compared with other’s L hook, our J hook can hold down battery more securely. It won’t slide out of the tray easily.
  • Easy to Install: Adjust the width and height according to the size of the battery, hook the J hook into the hole on the tray, tighten the wing nut screws to ensure a firm grip on the battery. The battery holder provides steady holding for the battery.
  • For Most Battery Size: This adjustable battery holder can be used for group 21，21R，22F, 22R, 24, 25, 26, 26R, 27, 31, 33, 34, 34R, 35, 36R, 41, 42, 43, 46, 47, 48, 49, 65, 78, 94R Batteries and most group size batteries.
Check Stock

US Motors AST125 Nidec Replacement Swimming Pool Pump Motor

  • Replacement 1.25 Total Horsepower (THP) swimming pool pump motor.
  • Standard 56J-Frame, C-Flange motor with threaded shaft.
  • Features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock.
  • Designed to replace a 1-HP Up-Rated or 3/4-HP Full-Rated motor and compatible with 115/230 volts.
  • Fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy.
Check Stock

THEPRO Battery Hold Down Tray Kit, Corrosion-Resistant Steel Storage Battery Holder Adjustable Bracket Clamp for Car, Boat, Marine (23cm Bolt with 28cm Battery Tray)

  • THEPRO Steel Universal Battery Trays have a vinyl coating for rust and corrosion resistance..
  • The groove design prevents the battery from contacting the tray fasteners.
  • the Battery Hold-Down Tray has a solid structure, good load-bearing capacity, and durability. There have 3 choice battery tray sets, please read the description to select the one you need..
  • [27cm J bolt with 34cm Battery Tray Kit] 27cm(10.6inch) J Bolt with Adjustable Hold Down from 146-203mm(Adjusts to suit battery width 146-203mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 4, 24, 27, 29, 31, 60, 74 & 77.
  • [23cm J bolt with 34cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 65, 48, 94R.
  • [23cm J bolt with 28cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 280mm(11in) Battery tray 7.36 in(187mm) width, 10.94 in(278mm) length, fits group 34, 74, 77, 78, 54, 55.
Check Stock

Nidec AST165 1.65 Horsepower 56J C-Flange Replacement Swimming Pool Pump Motor

  • Replacement 1.65 Total Horsepower (THP) swimming pool pump motor.
  • Standard 56J-Frame, C-Flange motor with threaded shaft.
  • Features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock.
  • Designed to replace a 1.5-HP Up-Rated or 1-HP Full-Rated motor and compatible with 115/230 volts.
  • Fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy.
Check Stock

Tactical Bolt Knob for B-14 Rifles

  • Compatible with all bolt handles threaded in standard 5/16"-24.
  • Machined from 17-4 Stainless Steel and Heat Treated for optimal strength and durability..
  • Physical Vapor Deposition (PVD) Coating - a metal ceramic film that exhibits a high micro-hardness (1500-8000 HV), in excess of 80 HRc..
  • 100% Manufactured and PVD Coated in the United States of America..
  • Installs easily on 5/16"-24 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock

Fourtry Spindles Fit for Craftsman 42 inch Deck Mower - Deck Spindle Fit for Poulan HU Sears Craftsman LT1000 LT2000 LTX1000 Riding Mower with 36' 38' 42' Cutting Deck, Replace 130794, 137641, 2 Pack

  • Compatible with most popular 36" 38" 42" cut lawn mower models: ① Craftsman: LT1000, LT2000, LTX1000, DLT 3000, YT3000 tractor ② Poulan: PP11536, PP1036S, PP1136J, PP11536KA lawn tractor..
  • Also work with: ③HU: CT 130, CTH 130, CTH 150, LR 12, LR 120, LR 121, LR 122, LT 100, LT 120, LT 1238, LTH 130, LTH 1342, LTH 140, LTH 145, YTH 150, YTH 1542, YTH 160, YTH 180, YTH 1842, YTH 190, YTH 1942 riding mower, etc. More information please refer to product details below..
  • Greasable: These 3-bolt spindles are pre-greased for direct use and are greasable for maintenance. Note: Spindle has no zerk fitting..
  • Easy to install: Comes with 2 spindles, each spindle equiped with pulley lock nut, blade bolt, washer, spacer, 3 threaded mounting bolts (the mounting holes are also threaded) and 5 pointed star-shaped design blade mount..
  • Replaces OEM part: AYP/ Roper/ Sears: 128285, 130794, 133172, 137641, 137645, 532128285, 532130764, 532133172. 532137645. HU: 532130794, 532-130794..
Check Stock

Wall Mounting Screws Bolts for Samsung TV - M8 x 43mm with Thread Pitch 1.25mm, Solid Screw Bolt Hardware for Mounting Samsung TV, TV Mounting Bolts Work with Samsung 50” 55' 65' 75' 6, 7, 8 Series TV

  • The 4 screws are for attaching your Samsung TV to the wall mount..
  • Metric M8 machine screws with 1.25mm threaded pitch and 43mm threaded length (the included spacers put the bolt at the correct depth）..
  • These wall mounting screws bolts work with Samsung 50″ 55″ 65″ 75″ 6, 7, 8 Series TV..
  • These screws bolts had been tested to fit the below model: 55″ NU8000, 55″ NU6950 TV, 55″ Q60R, 55″QLED Q6F, 65″ Q80R, 65Q60FN, 75″ UN75NU8000F, 75″ Q70R, UN65KS9000, QN49Q60R, QN65Q80R,UN60J6200 etc..
  • Note: Take a look at the manual for you TV Mount bracket as well as on TV manual – it will tell you what size needed to hang it..
Check Stock

Tactical Precision Manufacturing Titanium Bolt Knob 5/16x24 - Dragon Scale - (Long) 1.90

  • Compatible with all bolt handles threaded in standard 5/16"-24.
  • Machined from 17-4 Stainless Steel and Heat Treated for optimal strength and durability..
  • Physical Vapor Deposition (PVD) Coating - a metal ceramic film that exhibits a high micro-hardness (1500-8000 HV), in excess of 80 HRc..
  • 100% Manufactured and PVD Coated in the United States of America..
  • Installs easily on 5/16"-24 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock

ReplacementScrews TV Mount Holder Wall Ring Adapter Substitute Compatible with Samsung BN61-13518A - Pack of 4

  • The 4 screws are for attaching your Samsung TV to the wall mount..
  • Fits for : 55" NU8000, 55" NU6950 TV, 55" Q60R, 55"QLED Q6F, 65" Q80R, 65Q60FN, 75" UN75NU8000F, 75" Q70R, UN65KS9000, QN49Q60R, QN65Q80R,UN60J6200 etc..
  • Metric M8 machine screws with 1.25mm threaded pitch and 45mm threaded length (the included spacers put the bolt at the correct depth）..
  • Your model has not been listed? Take a look at the TV manual about the TV Mount bracket and it will tell you what size needed to hang it..
Check Stock

DC66-00777A Washer Pulsator Cap Replacement Part by Blue Stars - Exact Fit for Samsung Washers - Replaces 3282678 5788799 AP5788799

  • ✅ MODEL NUMBER: DC66-00777A Washer Pulsator Cap..
  • ✅ EASY TO INSTALL: It is made exactly fit for the most top name brand (Samsung) and replaces part numbers: 3282678, 5788799, AP5788799, PS8753312..
  • ✅ FIT MODELS: WA45H7000AP, WA45H7000AW, WA45H7200AP, WA45H7200AW, WA48H7400AP, WA48H7400AW, WA48J7700AW, WA48J7770AP, WA48J7770AW, WA50F9A6DSW, WA50F9A7DSP, WA50F9A7DSW, WA50F9A8DSP, WA50F9A8DSW, WA52J8060AW, WA52J8700AP, WA52J8700AW, WA52J8705MP, WA52J8705MP/A20000, WA52J8705MP/A2 0000, WA52J8707MP, WA52J8707MP/A20000, WA52J8707MP/A2 0000..
  • ✅ PREMIUM QUALITY: The replacement part is made from durable high-quality material and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance. It fits over the wash plate mounting bolt to protect the bolt and prevent clothing from catching on the washplate. Easy to install, no tools required. Unplug the washer before installing this part. Wear work gloves to protect your hands..
  • ✅ MONEY-BACK GUARANTEE: For any reason, you're not completely satisfied, you can ask for a replacement or full refund, no questions asked..
Check Stock

J-B Weld 24236 Perma-Lock Medium Strength Threadlocker - Blue - 36 ml

  • PERMALOCK: Provides a superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening from shock and vibration.
  • WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project.
  • EASY TO USE: Threadlocker is ideal for fastener applications requiring easy disassembly with hand tools. Perfect for 1/4- 1" fasteners. Cap will not drip, spill or clog.
  • DEPENDABLE & VERSATILE: Perfect for use on rocker arms, stud bolts, frame bolts, fasteners and bushings, loose screws and any other vibration sensitive item.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond.
Check Stock

3/4\ J-Bolt with Plate J Bolt Hinges for Large Heavy Driveway Gates, Steel, Iron, Wood or Aluminum Mounts on a 4\ X 4\ Post

  • Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated.
  • Hinge has a 3/8" X 11/2" welded plate with 2 holes to attach to an existing structure.
  • This hinge will swing a full 180 degree if installed without a stop.
  • The J-Bolt arm which attaches to the gate frame and is adjustible. Price is per Pair.
  • Threaded Bolt 7" Over all lenght,Sold in Pairs,Includes Grease fitting,Will fit on a 4" X 4" Post.
Check Stock

J-B Weld 27136 Perma-Lock High Strength Threadlocker - Red - 36 ml

  • RED HIGH STRENGTH: Provides a superior lock and seal for threaded fasteners. Ideal on mechanical parts, body assemblies, & heavy duty applications to prevent loosening from severe shock and vibration..
  • WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project..
  • EASY TO USE: High Strength Threadlocker is ideal for heavy-duty applications requiring resistance to severe shock and vibrations. Heating and hand tools are required to separate parts..
  • DEPENDABLE & VERSATILE: Perfect for use on rocker arms, stud bolts, frame bolts, fasteners and bushings, loose screws and any other vibration sensitive item..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World’s Strongest Bond..
Check Stock