Categories

Best Non waterproof 5050 Led Strips

Fntek 10Packs 4-Pin RGB LED Light Strip Connectors 10mm Unwired Gapless Solderless LED Tape Light Adapter Terminal Extension Connectors for SMD 5050 Multicolor LED Strip (10 Pcs 4PIN RGB Connector)

  • Application: Suitable for all 10mm wide (0.39 in) 4-pin SMD 5050 RGB flexible LED strips, making solderless and gapless connections for waterproof and non-waterproof LED light strips. Ideal for extending the LED strip and straight connection.
  • Easy to Use: Quick shunt connection and solderless snap down. Open the wire clamp. With a little effort, it will open quickly. Insert the 10mm LED strip into the clips under the two contact feet, making sure that the”+” and “-” correctly.
  • Fireproof Material: Fntek LED connectors are made from PBT material, which is heat resistant. 72W max wattage, which can be used for low wattage and high wattage light strips.
  • Note: Make sure you put the led strip under the pins and not on top. Please peel off silicon on the surface around soldering area when installing waterproof LED strips. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side.
  • Package: 10X 4 pin connectors for 10mm SMD5050 LED strip lights. If you have any questions, inquiries or need assistance, please feel free to contact us.
Check Stock

5050 4 Pin RGB LED Strip Connector Kit Includes RGB Extension Cable, LED Strip Jumper, 2 Way RGB Splitter Cable, L Connectors, T Connector, Gapless Connectors, 4 Pin Male Connector, LED Strip Clips

  • ...ctors, extension cable in 3.3 feet and 6.6 feet, 1 piece of 2 way splitter, 20 pieces solderless gapless connectors, 4 pieces L-shaped connectors and 4 pieces T-shaped connectors, which can meet your DIY need.
  • Compatible with: the LED connector kit fits the 0.39 inches/ 10 mm SMD 5050 RGB LED strips, compatible with waterproof and non-waterproof strips.
  • For waterproof LED strips, please strip off the silicon on the surface around the welding area.
  • Enjoy the fun of light strip: with these various LED connector adapters, you can easily set up your LED light bar and customize it.
  • Use a solderless 4-pin connector to connect a separate light strip, or use a corner connector to connect the corner of the house and table, the wall or the ceiling, etc..
  • Easy to install: 5050 4 pin RGB LED light bar connector kit can be plugged and played, easy to install, no tools and soldering are required.
  • Widely applied: light strip connector can be applied for the connection between 2 light strips, the connection between the light strip and the controller, the connection between the light strip and the separator.
Check Stock

Green Blob Outdoors Multi-Color Color Changing Pimp My Pontoon LED Underdeck Light kit for 24 to 32ft Models

  • BRIGHT 50ft MULTI-COLOR KIT - Your Pontoon will have the very best and brightest led strips on the market! GBO Pimp my Pontoon Boat Kit LED includes....
  • FLEXIBLE & DURABLE - Our Multi-Color LED Strips provide a bright but smooth and even ilumination effect. These SMD5050 contain 120 LED's per meter Our....
  • COMPLETE KIT - DIY Kit includes: Remote, 2 each 25ft Multi-Color LED Rolls of IP68 rated, Extremely Bright SMD5050 led strips. 1 each 30cm Red Neon....
  • IP68 WATERPROOF - Pimp my Pontoon LED Strips are IP68 rated, fully submersible. Brightest Available LED strip on the market. NOTE: LED strips can be....
  • ONUS: 30CM Red & Green Neon Navigation LED light strips included easy installation with written instructions provided.
Check Stock

Nexillumi L Shape 4-pin Connectors Angle Adjustable(90-180 Degrees) LED Strip Connectors for 10mm Width 5050 RGB LED Strip Lights(10 Pcs)

  • Only compatible with【4-pin 10mm】5050/3528 RGB LED strip lights and 2835/3528 4-pin 10mm LED Strips, not for 2-pin white 3528/2835 lights, not for dreamcolor chasing LED strip lights, not for tunable white LED strips, not for 2-pin white light strips, please make sure if your LED strips are 4-pin and 10mm.
  • L-shape 90 degree and the corner is adjustable and bent straight without being broken, the cords are intensified cords, and length is customizable.(Extra cables are not included).
  • Suitable for 4-pin 10mm LED strips that are IP65 waterproof and IP20 non-waterproof, please check the user manual in the photo gallery for how to use the LED strip connectors..
  • Remove part of the back-adhesive on the LED strips if you want the LED strips to have stable connections..
  • All products sold by us have a warranty of 365-day free replacement for defective products(Like Broken LED Lights or Power Adapter) and 30 days hassle-free full refund, please rest assured buying these. Thank you for choosing Nexillumi products..
Check Stock

Nelyeqwo 2 Pack 5M 16.4ft RGB Extension Cable LED Strip Connector 4 Pin Solderless Strip Jumper Cables Kit with 4 Pack 4 Male Pin Connector for 5050 3528 RGB LED Strip Light

  • High Quality: The LED strip light extension cable insulation made of PVC material, anti-corrosion, wire contains 4 strands of tin-plated pure copper, which is resistant to oxidation, flexible and tough, durable and longer life.
  • Easy to Install: Solderless, installation without tools, save time. Make sure arrow to arrow, plug and play.
  • Operating conditions: The RGB LED strip light connectors support maximum wattage of 72W , and 0-24v voltage input. Suitable for most families.
  • Function: The RGB extension cable can connect between IR/RF Controller and 5050/3528 LED strip light, extend strips to the ideal location. Or connect between 2 RGB LED strips, convenient and practical.
  • What You Get: Cost-effective, 2 x 5M 16.4ft RGB Extension Cable and 4 x 4 male pin connector for 10mm 5050/3528 RGB Waterproof and non-waterproof LED strip light.
Check Stock

10Packs LED Strip Connector 4 Pin 10mm Gapless Adapter for SMD 5050 RGB LED Light Strip

  • Simple Use: Suitable for all 4-pin 10mm wide SMD 5050 RGB LED strips..
  • Compatible With: Provide solderless,gapless and seamless connection for Both Waterproof and Non-Waterproof LED strip lights. .
  • Good Full Material: They are made from PBT material, heat resistant, Anti-burning, No safety hazards..
  • Firm Connection: Open the wire clip, simply slot the strip light into connector and clamp the cover (no need to solder), making sure the side of the strip aligns with the + symbol..
  • Package Content: 10 x LED Strips connector and if you have any product issues, please contact our customer service e-mail for a prompt solution, we will get it resolved within 24 hours.
Check Stock

4PCS 2M 6.56ft 4 Color RGB Extension Cable LED Strip Connector Extension Cable Cord Wire 4 Pin LED Connector for SMD 5050 3528 2835 RGB LED Light Strip

  • Length: 2M For - 5050/3528 RGB LED strip lights. RGB LED Extension Cable is designed for 10mm width LED strips.
  • Functions - 1.Connect between Controller and 5050/3528 RGB LED strips, to extend your LED strips to the ideal location where you'd like to install.
  • 2.Connect between RGB LED strips, making it possible to install your multiple RGB LED strips in your preferred locations. So, you can control your LED strips in another location..
  • Solderless - With 2 pre-soldered female connectors and 2 male 4 pin plugs(copper electroplated), you can directly plug this cable into your 5050/3528 RGB LED strips or controller to get them connected, without soldering..
  • Flexible and durable - The color is pretty. The PVC plastic insulation was durable and flexible. The pure copper wires inside are stranded so it can take a lot of flexing without breaking..
  • Package Includes: 4x 2m 4pin extension cable for RGB LED strips, 8x male to male 4pin plugs..
Check Stock

10-Pack L Shape Connectors and 10-Pack Waterproof LED Strip Clip Connectors, JACKYLED 10mm Wide 4 Pin Unwired Gapless Solderless RGB Connectors for 3528/5050 SMD LED Lights

  • MAX WATTAGE: 72W max wattage, these 4 pin connectors can use low wattage and high wattage led light strip. Handy tool for a firmly stable connection,no need to solder..
  • FIREPROOF MATERIAL: The led connectors are not like some cheap thin plastic kind. They are made from PBT material, heat resistant, Anti-burning, No Fire Hazard..
  • APPLICATION: The L shape connectors fit all 10mm wide 4 pin 3528/5050 wide RGB LED strips. While the 4 pin led connectors only suitable for 10 mm wide waterproof 5050 led strips. Perfect for LED light DIY project..
  • EASY TO USE: No soldering required. Simply connect the 4 copper contacts on the back of the prepared LED strip with the 4 pins of the led connectors, and then close the connector clips firmly to connect..
  • PACKAGE: 10pcs l shape led connectors, 10pcs waterproof led strip connectors.
Check Stock

FSJEE 4 Pin LED Strip Connector Kit for 5050 10mm LED Light Strip,Include 8 Types of Solderless LED Strip Accessories,Provide Most of Parts for DIY LED Strip Lighting Project

  • 1. Application ---- 4pin 10mm LED quick connector kit suitable for 10mm wide SMD 5050 RGB LED ribbon lights,connecting non-waterproof and waterproof LED strips,but need peel off the coating of waterproof LED strips..
  • 2.High Quality ---- Flame retardant PVC is durable and flexible. The pure copper wires inside are tin-plated, ensuring perfect electric conductivity and longer lifespan..
  • 3.DIY Combination ---- RGB Extension cable connector kit-This is a perfect accessory kit for your LED strips.It includes multi of connectors and almost meet all the connectors which used in your DIY colorful LED lighting program and showing the best effects..
  • 4. Easy Installation ---- RGB 4pin 10mm LED strip connectors are flexible and durable,Can be jointed with connectors by yourself.No soldering,no stripping ,just snap down quickly and vigorously with a pliers then you can enjoy your colorful lighting effects.These LED connectors support current Max 3A @24V and Max 6A @12V input..
  • 5. Warranty ---- 24months warranty for all FSJEE LED strip connectors, 90 days money back guarantee for any reason, 24 hours online customer service..
Check Stock

2 Pack 2M 6.5ft RGB Extension Cable LED Strip Connector 4 Pin Solderless Strip Jumper Cables Kit with 4 Pack 4 Male Pin Connector for 5050 3528 RGB LED Strip Light

  • Compatibility: fit for all 10mm 4-pin RGB LED strip lights, for Both 5050/3528 RGB Waterproof and non-waterproof LED strip light..
  • Easy to Install: Solderless, installation without tools, save time. Make sure arrow to arrow, plug and play..
  • Operating conditions: The RGB LED strip light extension cable supports maximum wattage of 72W , and 0-24v voltage input. Suitable for most 10mm 4-pin....
  • 2-pack extension cable: The RGB strip extension cables can connect between the IR/RF Controller and 5050/3528 LED strip light, extending strips to the....
  • What You Get: 2 packs 2M/6.5ft RGB Extension Cables, 4 pcs 4 male pin connectors, 8 pcs self-adhesive Cable clips, 30 days money back guarantee plus....
Check Stock

Beam Lighting 42-3/8” L-Shape Under Cabinet Light Cover Replacement | White Ribbed Acrylic Diffuser | 42-3/8” Length x 2-7/8” Width x 1” Height (Please Check The Size is Correct Before Ordering)

  • COMPLETE TRANSPARENT CLIPS designed to fit standard 8MM Wide Non-waterproof Light Strips SPECIALLY AND TIGHTLY.The ultra-thin and transparent design could be hidden itself in plain sight. It haven't any dark point on LEDs' illumination under the light strips turning on.
  • STRONG ADHESIVE.Safe and Convenient to stick on smooth metal,plastic,wood and ceramic surfaces.Strong adhesive release your worries of sag installation.
  • QUALITY MATERIAL.Made of eco-friendly nylon.Flame retardant rating up to UL94V-0. Safe to use. No sharp or rough edge.
  • FIX LIGHT STRIPS AND WIRES.Applicable for bare PCB NON-WATERPROOF 3528/5050/2835/5630 SMD LED strip light within 8mm wide,and Wires thicker than1/6".Adaptable on the back of TV,on smooth molding.
  • Except the LED strips, it's good to hold fairy lights,support light string ect.
  • EASY MAINTENANCE.Take down the LED strip light from the OPEN END when replace or maintain it.
Check Stock

Litever 6-Pack 3.3ft/1 Meter 9x18mm U Shape Aluminum Channels with Diffuser, End Caps and Mounting Clips LED Strip Channels for Max 16mm Wide LED Lightstrip Light Mounting--LL-007-M

  • Compact flat aluminum channels compatible for Lightstrip Plus 2nd. 6 pcs x 3.3 feet Aluminum Channels with frosted Covers + 12 sets of Accessories. (24 pcs end caps, 24 pcs Mounting Clips and Screws). ).
  • Aluminum channels diffusers wide enough for soldering-free easy connectors for 60 or 120 leds per meter 3528 led strips..
  • Aluminum channels with frosted covers wide enough for soldering-free easy connectors for single color or RGB 5050 led tapes..
  • Wider aluminum channels for many 12~16mm wide 3528 5050 5630 waterproof LED strips or any LED strip less than Width 16mm x Height 4mm..
  • This aluminum channel can NOT ensure a spotless lighting effect. No aluminum channel can ensure that. It greatly depends on "the distance between 2 leds" of your LED strips, the brightness of the LED strip, as well as the height of the aluminum channel. To get good lighting effect with this aluminum channel, we recommened LED strips more more than 120 LEDs per meter with high brightness. If you use 30 LEDs/Meter or 60 LEDs/Meter LED strips, the LED dots will be obvious but not that glaring..
Check Stock

FEBSNOW 80 PCS Light Strip Mounting Clips White Self Adhesive Led Light Fasteners Mounting Holder Cable Clamp Organizer for 10mm Light Strip (10 mm)

  • 【Quality Material】: The light strips clips are made of quality PA66 material, which is recycled and durable, and has no damage to the light brightness..
  • 【Strong Adhesive】: The back of the strip light clips has strong glue, which is strong self-adhesive, so it is not necessary to worry about the light strip falling off..
  • 【Easy to Install】: The led strip clips can be attached to smooth metal, plastic, wood and ceramic surfaces safely and conveniently, and the disassembly is also be simple..
  • 【Wide Application】: The light strips clips are suitable for waterproof and non waterproof 3528 / 5050 / 2835 / 5630 LED light strip, the width of light strip is within 10 mm..
  • 【Reminder】: These led strip clips are only suitable for fixing LED light strips or some thin wires (diameter less than 3mm). At the same time, after the clip is attached to the wall, it is better not to fix the object within 48 hours, because the desired fixation effect will not be achieved..
Check Stock