Categories

Best Nooelec R820t2s

Great Scott Gadgets Ubertooth One Antenna & Aluminum Enclosure Bundle by Nooelec

  • Everything you need to get started with 2.4GHz development, including Ubertooth One module installed into a custom shielded aluminum enclosure and a....
  • All bundle components covered under warranty for 1 year, directly through Nooelec.
  • Ubertooth One is a configurable 2.4GHz transceiver with great application software and support.
  • and with suitable transmit power and receive....
  • Standard Cortex Debug Connector (10-pin 50-mil JTAG) In-System Programming (ISP) Serial Connector.
  • Expansion connector intended for inter-Ubertooth communication or other future uses.
Check Stock

NooElec HackRF One Software Defined Radio SDR ANT500 & SMA Antenna Adapter Bundle

  • Your bundle includes a HackRF One, an ANT500 antenna, 4 SMA antenna adapters and a USB cable for powering the HackRF.
  • HackRF One is capable of half-duplex transmit and receive in the range of 1MHz to 6GHz.
  • HackRF One is compatible with a wide range of SDR software applications.
  • The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas.
  • Installation support and assistance available directly from NooElec.
Check Stock

NooElec Extruded Aluminum Enclosure Kit, Black, for Ham It Up Plus Barebones RF Upconverter for NESDR and RTL-SDR radios

  • Comes with all hardware required for finished assembly, including color-matched screws and rubber feet for non-slip usage.
  • Enclosure is laser-engraved with logo and labels, to ensure permanency.
  • NOTE: Ham It Up Plus Barebones circuit board is sold separately and is NOT included!.
  • Designed and manufactured by NooElec in North America. Impeccable quality and full 2-year warranty!.
Check Stock

Nooelec Oscilloscope DIY Kit (replacement for DSO138) Bundle. Includes 100MHz Scope Probe, Clip Probe & ESD-Safe Silicone Mat

  • Build your own color oscilloscope! Basic through-hole soldering skills are required (surface mount parts are pre-soldered to PCB).
  • Purchase includes full oscilloscope kit with parts, 100MHz oscilloscope probe, additional alligator clip probe, and ESD-safe mat for protecting your desk while soldering.
  • Printed instructions, troubleshooting guide and schematic are also included.
  • Contains a 2.4″ color TFT LCD (320×240) display.
  • We speak your language! Need help? Contact Nooelec for assistance!.
Check Stock

Twenty Greek Stories Designed to Accompany Hansen and Quinn's Greek: An Intensive Course (English and Greek Edition)

  • Your bundle includes a HackRF One, an ANT500 antenna, 4 SMA antenna adapters and a USB cable for powering the HackRF.
  • HackRF One is capable of half-duplex transmit and receive in the range of 1MHz to 6GHz.
  • HackRF One is compatible with a wide range of SDR software applications.
  • The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas.
  • Installation support and assistance available directly from NooElec.
Check Stock

Ham It Up Plus - HF/MF/LF/VLF/ULF Upconverter w/TCXO

  • A high-quality RF (ULF/VLF/LF/MF/HF) converter for software defined radio devices like our NESDR series (RTL-SDR) and the HackRF--extends your radio range down to 300Hz.
  • The Ham It Up Plus is fully assembled in a custom, black, aluminum enclosure, tested, and ready to use. Includes SMA to SMA connector to attach the output to your radio, and an SMA to BNC antenna adapter..
  • A separate noise source circuit is included for testing and calibration of various RF devices.
  • Proudly made in the USA and Canada! Full 2 year product warranty, directly through Nooelec.
  • Ham It Up Plus has all the same fantastic features as the popular Ham It Up (v1.3), and shares an identical form factor to ensure compatibility with optional enclosures and Ham It Up addons (available separately).
Check Stock

Nooelec GOES Weather Satellite Mesh Antenna - 21dBi Parabolic Antenna w/ 1.7GHz Center Frequency 200MHz+ Bandwidth LMR400 Feed Cable with Male SMA Connector Mounting Hardware & 2 Year Warranty

  • This 21dBi antenna is meant for high gain L-band applications where the antenna is stationary. The center frequency is 1.75GHz, and bandwidth is....
  • Can be deployed for both linearly and circularly polarized signals (RHCP and LHCP).
  • Software is required for the decoding of images. Current options are either free Linux-based decoders or a paid version of XRIT Decoder for Windows (a....
  • Full 2 year warranty directly through Nooelec!.
Check Stock

NooElec NESDR Mini 2 SDR & DVB-T USB Stick RTL2832 + R820T2 with Antenna and Remote Control

  • Contains RTL2832U interface IC and the new, improved R820T2 tuner! This tuner has improved sensitivity and SNR compared to devices using the R820T.....
  • Contains all the same improvements on the 'generic' design as were made on the popular and well-tested NESDR Mini, including higher-accuracy clock,....
  • 1-year warranty direct from Nooelec! With locations in both the US & Canada, and full technical support services, your investment is a safe and wise....
  • Frequency capability is approximately 24MHz-1750MHz, with no gaps within that range. Expansion to HF, all the way down to 100kHz, is available with....
  • Free high-quality telescopic antenna, much improved over the older thin-whip style antenna. Turn on, tune in and...listen!.
Check Stock

NESDR Smart v4 RTL-SDR Essentials Starter Kit - Includes Everything to Start with Software Defined Radio Including Premium SDR Flamingo FM Bandstop Filter 3 Antennas 10 Adapters & Case

  • Includes all hardware and software (free download) you need to get started with software defined radio!.
  • Listen (and see!) nearly any RF signal within the frequency capability of the radio (27-1700MHz).
  • Included is an NESDR SMArt v4 RTL-SDR, 3 antennas, a "Flamingo FM" broadcast FM bandstop filter, 10 RF adapters and cables, and a carrying case.
  • Proudly manufactured by Nooelec in the USA and Canada, with a full 2 year product warranty on all bundle components and 24/7 technical support....
  • Amazon-exclusive bundle! Only available for a limited time.
Check Stock

Nooelec Dual-Band NESDR Nano 2+ ADS-B 978MHz UAT & 1090MHz 1090ES Bundle for Stratux™ Avare Foreflight FlightAware & Other ADS-B Applications Includes 2 SDRs 4 Antennas 5 Adapters.

  • Includes 2pc NESDR Nano 2+ SDRs. Each SDR is lab-calibrated and EEPROM-programmed for simple Stratux software setup..
  • Each NESDR Nano 2+ includes a high-quality 0.5PPM TCXO. This ensures tuning stability, even in extreme temperature conditions (like those which occur....
  • Each SDR includes a calibration sticker and identification labels..
  • 4 ADS-B antennas, 3 RF pigtail cables and 2 RF adapters are included to facilitate a very wide range of installation options for embedded....
  • Full 2-year warranty through Nooelec on all bundle components..
Check Stock

Nooelec Dual-Band NESDR Nano 2 ADS-B 978MHz UAT & 1090MHz 1090ES Bundle for Stratux Avare Foreflight FlightAware & Other ADS-B Software Applications Includes 2 SDRs 4 Antennas & 5 Adapters

  • Includes 2pc NESDR Nano 2 SDRs. Each SDR is lab-calibrated and EEPROM-programmed for simple Stratux software setup..
  • The small size of the NESDR Nano series of SDRs ensures your embedded application has a footprint as small as possible..
  • Each SDR includes a calibration sticker and adhesive identification labels..
  • 4 ADS-B antennas, 3 RF pigtail cables and 2 RF adapters are included to facilitate a very wide range of installation options for embedded....
  • Full 1-year warranty through Nooelec on all bundle components..
Check Stock

NooElec SAWbird+ GOES - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for NOAA GOES/LRIT/HRIT/HRPT Applications 1688MHz Center Frequency

  • SAWbird+ GOES is a self-contained LNA module designed for capturing beautiful weather images available from NOAA GOES satellites.
  • The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest.
  • The amplifier can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to....
  • Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee XTR v2 (available on Amazon, item ID B06Y1GN5RP).
  • Includes free male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through Nooelec!.
Check Stock

NESDR SMArTee v2 SDR - Premium RTL-SDR w/Integrated Bias Tee Aluminum Enclosure 0.5PPM TCXO SMA Input RTL2832U & R820T2-Based Software Defined Radio

  • Unmatched price & performance--redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the....
  • Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues--run devices side-by-side without messy extension....
  • Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna....
  • Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!.
Check Stock