Categories

Best Nooelec Sdr Software

Nooelec Dual-Band NESDR Nano 2 ADS-B 978MHz UAT & 1090MHz 1090ES Bundle for Stratux Avare Foreflight FlightAware & Other ADS-B Software Applications Includes 2 SDRs 4 Antennas & 5 Adapters

  • Includes 2pc NESDR Nano 2 SDRs. Each SDR is lab-calibrated and EEPROM-programmed for simple Stratux software setup..
  • The small size of the NESDR Nano series of SDRs ensures your embedded application has a footprint as small as possible..
  • Each SDR includes a calibration sticker and adhesive identification labels..
  • 4 ADS-B antennas, 3 RF pigtail cables and 2 RF adapters are included to facilitate a very wide range of installation options for embedded....
  • Full 1-year warranty through Nooelec on all bundle components..
Check Stock

NooElec HackRF One Software Defined Radio SDR ANT500 & SMA Antenna Adapter Bundle

  • Your bundle includes a HackRF One, an ANT500 antenna, 4 SMA antenna adapters and a USB cable for powering the HackRF.
  • HackRF One is capable of half-duplex transmit and receive in the range of 1MHz to 6GHz.
  • HackRF One is compatible with a wide range of SDR software applications.
  • The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas.
  • Installation support and assistance available directly from NooElec.
Check Stock

NESDR Smart v4 RTL-SDR Essentials Starter Kit - Includes Everything to Start with Software Defined Radio Including Premium SDR Flamingo FM Bandstop Filter 3 Antennas 10 Adapters & Case

  • Includes all hardware and software (free download) you need to get started with software defined radio!.
  • Listen (and see!) nearly any RF signal within the frequency capability of the radio (27-1700MHz).
  • Included is an NESDR SMArt v4 RTL-SDR, 3 antennas, a "Flamingo FM" broadcast FM bandstop filter, 10 RF adapters and cables, and a carrying case.
  • Proudly manufactured by Nooelec in the USA and Canada, with a full 2 year product warranty on all bundle components and 24/7 technical support....
  • Amazon-exclusive bundle! Only available for a limited time.
Check Stock

Twenty Greek Stories Designed to Accompany Hansen and Quinn's Greek: An Intensive Course (English and Greek Edition)

  • Your bundle includes a HackRF One, an ANT500 antenna, 4 SMA antenna adapters and a USB cable for powering the HackRF.
  • HackRF One is capable of half-duplex transmit and receive in the range of 1MHz to 6GHz.
  • HackRF One is compatible with a wide range of SDR software applications.
  • The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas.
  • Installation support and assistance available directly from NooElec.
Check Stock

Ham It Up Plus - HF/MF/LF/VLF/ULF Upconverter w/TCXO

  • A high-quality RF (ULF/VLF/LF/MF/HF) converter for software defined radio devices like our NESDR series (RTL-SDR) and the HackRF--extends your radio range down to 300Hz.
  • The Ham It Up Plus is fully assembled in a custom, black, aluminum enclosure, tested, and ready to use. Includes SMA to SMA connector to attach the output to your radio, and an SMA to BNC antenna adapter..
  • A separate noise source circuit is included for testing and calibration of various RF devices.
  • Proudly made in the USA and Canada! Full 2 year product warranty, directly through Nooelec.
  • Ham It Up Plus has all the same fantastic features as the popular Ham It Up (v1.3), and shares an identical form factor to ensure compatibility with optional enclosures and Ham It Up addons (available separately).
Check Stock

NESDR SMArTee XTR SDR - Premium RTL-SDR w/Extended Tuning Range, Aluminum Enclosure, Bias Tee, 0.5PPM TCXO, SMA Input. RTL2832U

  • Premium software defined radio NESDR SMArTee XTR in a beautiful silver brushed aluminum enclosure.
  • A wide variety of improvements on other designs, including integrated 4.5V 250mA bias-tee, ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector.
  • Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
  • SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6).
  • Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty..
Check Stock

Nooelec NESDR Smart HF Bundle 100kHz-1.7GHz Software Defined Radio Set for HF/UHF/VHF Including RTL-SDR Assembled Ham It Up Upconverter Balun Adapters

  • A full, wide-band RF solution for those interested in getting started with software defined radio and with a keen interest in HF bands.
  • The NESDR SMArt HF Bundle utilizes a well-designed upconverter--the Ham It Up--to receive HF, NOT direct sampling hacks. This results in a vastly....
  • Included is a Ham It Up v1.3 upconverter, installed in a custom black aluminum enclosure.
  • an NESDR SMArt RTL-SDR, 3 antennas, an impedance matching....
  • Proudly manufactured by Nooelec in the USA and Canada, with a full 2 year product warranty on all bundle components and 24/7 technical support....
  • Amazon-exclusive bundle! Only available for a limited time. NOTE: enclosure colors may vary contingent on availability.
Check Stock

Nooelec HackRF Complete Bundle - Genuine HackRF One Software Defined Radio SDR with 0.5PPM TCXO in a Custom Black Aluminum Enclosure ANT500 Antenna & SMA Antenna Adapter Bundle Included

  • Your bundle includes a genuine HackRF One installed an inconspicuous black aluminum enclosure with a 0.5PPM TCXO module, an ANT500 antenna, 4 SMA....
  • HackRF One is capable of half-duplex operation in the range of 1MHz to 6000MHz. The TCXO module ensures impeccable tuning accuracy in nearly any....
  • HackRF One is an open-hardware device which is compatible with a wide range of SDR software applications, most of which are free to download and open....
  • The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas.
  • Installation support and assistance available directly from Nooelec. Full 2 year warranty!.
Check Stock

NooElec NESDR Smart XTR SDR - Premium RTL-SDR w/Extended Tuning Range, Aluminum Enclosure, 0.5PPM TCXO, SMA Input. RTL2832U & E4000-Based Software Defined Radio

  • Premium software defined radio NESDR SMArt XTR in a beautiful silver brushed aluminum enclosure.
  • A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector.
  • Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
  • SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6).
  • Proudly built by NooElec in the USA and Canada! Full 2-year product warranty..
Check Stock

Nooelec NESDR Smart v4 SDR - Premium RTL-SDR w/Aluminum Enclosure, 0.5PPM TCXO, SMA Input. RTL2832U & R820T2-Based Software Defined Radio

  • Premium Software Defined Radio 'NESDR SMArt' in a beautiful brushed aluminum enclosure. Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.
  • A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, RF-suitable voltage regulator, custom heatsink, 2 silicone pads and SMA female connector.
  • Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
  • SDR frequency capability approximately 25MHz-1700MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6).
  • An 8pc SMA adapter set and carrying case is also available on Amazon (Product ID B073JT98RR).
Check Stock

NESDR SMArTee v2 Bundle - Premium RTL-SDR w/Integrated Bias Tee, Aluminum Enclosure, 0.5PPM TCXO, SMA Input, Antenna Base & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio (SDR)

  • An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR, high-quality antenna base, and 3 antenna masts to get you started right away without any further purchases!.
  • Unmatched price & performance–redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed .
  • Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues–run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi!.
  • Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software.
  • Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!.
Check Stock

RaTLSnake M6 v2 - Premium 3-Antenna Bundle for NESDR, RTL-SDR, HackRF, and Other Software Defined Radios. Magnetic Whip Antenna Set Made with Low-Loss RG58 Cable for Radios with 50 Ohm SMA Connectors

  • Heavy-duty, wide-band premium antenna bundle for RTL-SDR and other SMA radios. Long 2m (6') cable made with low-loss RG-58.
  • Includes antenna base and 3 antenna masts--helical, DVB-T2 and telescopic--for wideband reception. Specially designed for wideband software defined radios.
  • Male SMA connector on antenna cable for easy connectivity to all 50Ω SMA-input radios like our NESDR SMArt series and HackRF One.
  • Redesigned for 50Ω to maximize compatibility with commonly used radios and to reduce SWR mismatches. The base has been redesigned to improve ground plane coupling and shielding over v1..
  • Antenna base is constructed from heavy-gauge metal for resilience and longevity. Includes full 1 year warranty direct from Nooelec!.
Check Stock

NooElec NESDR Smart XTR Bundle - Premium RTL-SDR w/Extended Tuning Range, Aluminum Enclosure, 0.5PPM TCXO, SMA Input

  • Premium RTL-SDR bundle includes NESDR SMArt XTR in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts.
  • A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, 2 separate RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector.
  • Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
  • SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6).
  • Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.
Check Stock