Best Norton Hot Surface Ignitor 271n

Furnace Ignitor Igniter Directly Replaces Rheem 62-22868-02

Made from high-purity recrystallized silicon carbide (crystar) which combines physical and thermal strength with stable electrical properties.
Designed to reach ignition temperature(s) within 17 seconds.
Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity.
Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection.
Operate at 120 vac. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120 vac..

❤【PERFECT FIT】- 62-22868-93 hot surface ignitor is perfectly compatible with Rheem, Ruud, and Weatherking furnaces (NOTE: Not To Fit -gec or -ged "drum" Heat Exchanger Type Furnaces).
❤【REPLACEMENT MODEL】- 62-22868-93 furnace ignitor replaces part number 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S, 62-22869-01, 62-23460-01, 8553-5514 (Contact us if you are not clear the compatibility, and we are here to help within 24 hours).
❤【EXCELLENT PERFORMANCE】- The 62-22868-93 furnace hot surface ignitor with wire connectors is used to light the oven burner and adjust the temperature normally. It fixes the symptom that the oven failing to heat or not heat properly. Use this high-quality replacement part to extend the life of the oven.
❤【PREMIUM QUALITY & EASY INSTALLATION】- Our 62-22868-93 furnace ignitor for rheem is made of durable and high-quality materials well-tested by the manufacturer, with higher heat resistence, durability and the best quality for greater power connection, higher load and longer service life. ⚠️It is fairly easy to install. If wire connector does not match up you will need to cut off the connector and splice the wires with porcelain wire nuts.

2 prong molex plug end on it. 2 porcelain wire nuts are included.
The wire leads measure 8″ long to end of plug.
The ceramic bar measures 1.5″ long & metal shield around ignitor.
It is a replacement Norton 501A, 229C5216P001, WB13K21, WB13T10045, AP2020569, AP3202322, PS231280 and PS952863.

Genuine OEM Replacement for Goodman and Amana units..
The 0230K00001 mini ignitor replaces outdated part numbers B1401018, B1401015, B1401009, B1401009S, and B1401018S..

Gas Range Igniter for Norton, Tappan Flat Style Oven Ignitor IGN-4, IGN-5, IGN-8.

【COMPATIBILITY】Replacement hot rod ignitor kit compatible with all Traeger wood pellet grill models (EXCEPT PTG) : Traeger 070, 075, Texas Elite Series, Pro 22, Pro 34, Lil Tex Elite Series, BBQ Series ,Pit Boss 700 700FB 70112 820 820D 820Pro. It also fits for Camp Chef wood pellet grills..
【POWERFUL FUNCTION】This grill hot rod ignitor ignites the hardwood, making starting your grill as simple as flipping a switch. And it keeps fire going, get delicious flavor with hardwood fuel..
【EASY INSTALLATION】It can be installed easily, plug and play wiring. You just need to took about 10 minutes to replace. Located at bottom of firepot, for proper installation, only 1/8-1/4 inch should be showing in firepot..
【DIRECT REPLACEMENT】When your current hot rod shortens or burns out, this hot rod ignitor kit replacement part will ensure that your grill continues to operate effectively..
【PERFECT FIT】High density cartridge heating element, 200W/120V-24" wire lead, 5A/250V fuse, identical match to the OEM hot stick..

Gas Igniter for Stove Range, Replacement Part No. SGR403.
SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
ignitors are fragile and will break easily..
Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
Description:Use your wire cutters to cut the wires on the old ignito....

Gas Igniter for Stove Range, Replacement Part No. SGR403.
SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
ignitors are fragile and will break easily..
Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
Description:Use your wire cutters to cut the wires on the old ignito....