Categories

Best Not A Hole

2 Pcs Stainless Steel Kitchen Sink Tap Hole Cover ，Kitchen Faucet Hole Cover ，Faucet Hole Cover，Sink Tap Hole Cover，Kitchen Faucet Hole Cover Stainless Steel (1.2 to 1.6 Inch in Diameter)

  • Material: Sink Tap Hole Coveris made of durable stainless steel and plastic,to prevent rusting ​and will not fade ，Can be used for a long time。.
  • Applicable size： Kitchen Faucet Hole Cover for holes between 1.2 to 1.6 inch. The thickness of the sink should be less than 0.4 inch. (This is not long enough for granite counter tops) Most household Kitchen Sink Hole Cover are standard sizes.please check its size before buying..
  • Easy to install：Kiut the sink hole cover stainless across the faucet hole, then under the sink, tighten the bottom screw,It covers the spray hole, no need tools, Kitchen Sink Tap Hole Plate Stopper Cover ​is equipped ​with a rubber gasket to achieve a good seal and avoid leakage..
  • Stainless Steel Kitchen Sink Tap Hole Cover device is decoration and leakage prevention,preventing water from leaking onto the floor,keep the kitchen clean and tidy.Kitchen Sink Tap Hole Plate Stopper Cover very small, which convenient to store and don not take too much space..
  • We believe that our Premium Sink Tap Hole Cover，will exceed your expectations. If you have questions, please contact us any time. We will try our best to solve your problems..
Check Stock

Ram 1500 Stake Pocket Covers,Truck Rear Bed Rail Stake Pocket Cover Hole Plugs Compatible with Dodge Ram 2019 2020 2021(Set of 2)

  • PERFECT FIT: According to the original design of the OEM, make sure to match the truck rear stake pocket holes of the original model perfectly. Our Ram 1500 Stake Pocket Cover is special designed for Dodge Ram 2019 2020 2021. Please note,do not fit 2018 Ram and before.The Size is 2.36 *2.36 *2.75 inch(6*6*7cm).Please measure the size of stake pocket to confirm whether it compatible with your car hole size before purchasing..
  • HIGH QUALITY MATERIAL: the 2021 Ram stake pocket cover is made of high quality ABS plastic material, corrosion resistance, wearable and durable, not easy to damage and crack. The sturdy Ram rear bed rail stake pocket covers not only can protect the stake hole, but also give your truck a great custom look. Moreover, the stake pocket cover does not fade and crack. There are no color difference between the cover caps and the bed rail after installation..
  • 1 MINUTE INSTALLATION: Ram 1500 stake pockets covers installation will be extremely easy and convenient.First wash and clean the hole,then place the stake pocket cover over the stake pocket hole,snap it tightly to the hole by hand, no need any tools during whole installation. In addition,there is an uneven edge at the extend of stake pocket cover, which could make the bed rail cover b....
Check Stock

Warp 9 Racing 60 Tooth Sprocket Sur Ron Segway

  • ✔Fitment: It Fits Go-Karts & Mini Bikes Equipped With Predator 79cc , Predator 212cc Or 420cc. It Maybe Used On Other Applications Of Mini Bike Go Kart Trike ATV, Please Check The Dimension Size Of The Sprocket Before Order..
  • ✔Attention: This item is a sprocket with 60 teeth for use with a #35 size chain. If your chain size is #35, please check if the center hole diameter and mounting hole distance of the sprocket are consistent with our products. If not ,it will not fit..
  • ✔Sprocket Size: #35 Chain,Teeth: 60 Tooth/ Mounting Hole Distance (center to center, bolt hole circle): 74mm (2.91 inch)/ Center Hole Diameter: 51mm (2.01 inch)/ Overall Diameter: 185mm (7.28 inch)/ Mounting Hole Diameter: 10mm (0.39 inch)x4.
  • ✔Made of premium quality material, durable for a long time use..
  • ✔Package List: 1 * #35 60T Sprocket, 5 * Master Link.
Check Stock

BEAMNOVA Set of 16 Diamond Drill Bits with Jig Ceramic Tile Hole Drilling Set Kit 6mm-50mm 1/4~2 Inch Hole Saw Set for Glass Stone Granite Marble

  • COMPLETE HOLE DRILL SET - Includes 15 Sizes Diamond Hole Drilling Bits: 6/8/10/12/14/16/18/20/22/25/26/28/30/40/50mm (1/4 to 2 inch) & a universal hole drilling jig (positioning tool). Note: Drill machine is not included..
  • EFFICIENT & QUICK DRILLING - The diamond hole drilling kit feature sharp edges, which are coated with high quality diamond. Able to creates in seconds a sharp, high precision and smooth-side hole with no broken edges. THE CHIP REMOVAL HOLE DESIGN facilitates chip removal, water addition and bit replacement. Improves work efficiency and extends service life..
  • USER-FRIENDLY HOLE POSITIONING TOOL - The roller bearing can clamp the drill bit and enables to drill accurately, creating a smooth hole without burrs. Easy to operate, safe and convenient to use..
  • UNIVERSAL ADJUSTABLE JIG - The base is equipped with a powerful suction cup, which can be firmly attached to the surface of the object without sliding. The clamping range is 4-83mm (1/8~3-1/4 inch), which is commonly used for most hole drilling tools..
  • WIDELY APPLICABLE - 15 sizes meet most hole drilling ne....
Check Stock

CheroCar for Ram USA Flag Stake Pocket Covers, Rear Truck Bed Rail Stake Pocket Cover for Dodge Ram 2018-2022

  • 【Perfect Fit】CheroCar stake pocket cover fit for 2018-2022 Dodge RAM.
  • 【Quality Material】 The stake pocket cover is made of high quality ABS plastic material,corrosion resistance,sturdy and durable. The durable & sturdy Ram rear bed rail stake pocket covers not only can protect the stake hole,but also give your truck a great custom look..
  • 【Easy To Install】Just 1 minute.First wash and clean the hole,then place the stake pocket cover over the stake pocket hole,then snap it to the hole, no need any tools during whole installation..
  • 【Great Protection】The stake pocket cover can keeping rain,snow,dirty,leaves and sand out of the stake hole,protect the stake hole from exposing. The ram bed rail stake pocket cover is a good choice to prevent the stake hole from rusting.And it's tight enough to prevent water seeping through and does not pop out at random or stolen..
  • 【Package Includes】2 x Stake pocket covers..
Check Stock

LOVEINUSA Craft Shapes Punch, 12PCS Airplane Shaped Paper Punches Hole Border Punch Set for DIY Craft Scrapbooks Making Greeting Cards Gift Wrapping Kids Design

  • What You Will Get - You will get 12 PCS airplane-shaped paper punches in 12 different patterns, such as crown, dog's paw, snowflake, heart, castle, bow tie, charm, flower, pentagonal heart, maple leaf, etc. All the popular elements are in one package to satisfy different needs. The airplane-shaped hole punches come in 4 different colors, yellow, blue, green and pink..
  • Premium Quality - Our hole punches are made of high-grade zinc alloy and ABS. Our hole punches are firm and durable, lightweight, nontoxic and odorless, children can safely use our airplane-shaped hole punches. Warm Notice: In order to press the complete pattern, it is recommended to use thin paper, thick paper is not suitable..
  • Safe and Children-Friendly - The airplane-shaped punches can attract children's attention. The sizes of the airplane-shaped hole punches are only 2 inches. Not only for the adults to use, our airplane-shaped hole punches are also very suitable for children's little hands. At the same time, we specially designed a narrow slot to avoid hurting your little one's fingers..
  • Easy to Use - The airplane-shaped hole punches are designed with a spring button for easy use. You can just use a little bit of effort to press out a perfect pattern from our hole punches. The conven....
Check Stock

The Hillman Group 58182 1/2-Inch Black Nylon Flush Button Plug, 25-Pack

  • MATERIAL - Plastic hole plug has strong insulation and abrasion resistance, is waterproof and dust-proof. Can be used to fill, cover and decorate redundant holes to keep the panel flat..
  • PERFORMANCE - This hole plug is designed with an elastic buckle, which can adapt to panels of different thicknesses, is more firm and not easy to fall off. The stepped clip is suitable for a variety of irregular round holes..
  • APPLICATIONS - Mainly used for electrical appliances, distribution boxes, cabinets, door panels, window frames, aluminum and stainless steel pipe tables and chairs. Ideal replacements for the furniture hole plugs in your home, office, school and factory..
  • WHAT YOU GET - 25 Pcs x Hole Plugs. If you have any question, please feel free to contact us ! Please note that this white is not pure white, is more of yellow white, please choose it as needed..
Check Stock

580 Pcs Self-Adhesive Screw Hole Stickers, 6-Table Self-Adhesive Screw Covers Caps Dustproof Sticker 12mm, 15mm, 21mm White

  • SUFFICIENT QUANTITY: Package includes 6 pack screw hole covers stickers, Two sheets for each of the three specifications. 12 mm/280Pcs, 15mm/192Pcs, 21mm/108Pcs. Enough quantity for you to use..
  • HIGH-QUALITY: Self-adhesive screw hole stickers are made of high-quality PVC plastic, this material is very elastic, not easy to deform, can be used for a long time..
  • STRONG ADHESIVE ABILITY: Our cover caps stickers use strong glue, can bond most of the material surface. Not easy to fall off, paste firmly. After the paste makes the furniture more beautiful..
  • VARIOUS USES: Very suitable for wooden furniture, cabinet stickers, cabinet nail group, mirror decoration, table cap, table hole, lamp hole, building bookcase and other furniture, can well cover the screw hole, installation hole..
  • WHAT YOU GET: 580 Pcs screw hole covers stickers, our 7*24 friendly customer service for peace of mind..
Check Stock

One Dozen about 0.75\ High Silver Tone Bells Wedding Motorcycle Chrome Plated Brass Bells

  • RECENTLY MADE BEST QUALITY REPLICA MARINE PORT HOLE PORT WINDOW WITH ACRYLIC - THIS PORT HOLE COMES WITH ACRYLIC, NOT WITH GLASS.
  • ALUMINIUM MADE SILVER TYPE - Recently Made Best Quality Replica MARINE PORT HOLE PORT WINDOW - ALUMINUM BODY - GLASS(ACRYLIC) SIZE: APPROX 8 INCHES - OUTER SIDE SIZE: APPROX 11 INCHES - LITTLE AND VERY NICE - WEIGHT APPROX: 1.1 KILO - THIS PORT HOLE COMES WITH ACRYLIC, NOT WITH GLASS - ALUMINUM MADE SILVER TYPE - BEST QUALITY REPLICA - THIS PORT HOLE COMES WITH ACRYLIC, NOT WITH GLASS.
Check Stock

ORAEVY 52.4mm Complete Cylinder Head Replacement for 4 Stroke 110cc Engine Chinese ATV Go Kart Dirt Bike Pit Bike Scooter Coolster TaoTao SSR

  • Perfect match：Fit for most Chinese made 4 stroke 110cc Engines,Compatible with TaoTao 110cc,SSR 110cc,Coolster 110cc ,Kazuma Falcon 110cc,Panda 100cc,Coyote 110cc,Redcat 110cc,Roketa 110cc,BMS 110cc ,Sunl 110cc.
  • Product parameter：Bore: 52.4mm /about 2.06'',Intake valve:23mm/0.91",exhaust valve:20mm/0.79",Timing Drive Sprocket-28 teeth.
  • Other parameters：Blot hole spacing(A):1.74".
  • Not Replacement for:Will not replace 125cc Cylinder Head with 23mm and 28mm Intake and Exhaust valves.
  • Package includes:1*Complete Cylinder Head，1* set of complete cylinder gaskets，1*Bakelite mat，1*Exhaust pipe gasket，2*Exhaust pipe screws，1*A7 spark plug，1*pair free installation gloves.
Check Stock

Kitchen Faucet Hole Cover Stainless Steel Premium Sink Tap Hole Cover Brushed Stainless Steel

  • Won't Rust and Tarnish: Meshatty faucet hole cover is made of durable stainless steel and plastic, so please don't worry about rusting and tarnishing,....
  • So Easy to Use: Put the sink hole cover stainless across the faucet hole, then under the sink, tighten the bottom screw.
  • Fit Most: Our sink tap hole cover is the standard size for most households.
  • Suitable for hole sizes between 1.2 to 1.6 inches, the thickness of the....
  • Add Luster to Our Kitchen: Made of brushed nickel, smooth surface, simple and generous design, useful functions, make your kitchen look more....
  • Lifetime Satisfaction Guarantee: If you're not happy we're not happy! If we can't make it right and you are not satisfied for any reason, we will....
Check Stock

JINGLING 50mm 2\ inch Diamond Drill Bit Hole Saw for Glass Tile Ceramic

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

JINGLING 175mm 7' inch Diamond Hole Saw Coated Tile Drill Bits for Glass Stone

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock