Categories

Best Nozzle For Ender 3

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

3D Printer Parts Accessories Tool Set Cleaner Kit 41PCS with E3D Nozzles Cleaning Needles Tweezers Heater block and Cover,Tube Throat for Ender 3 Pro/Ender 5/ CR-10/10S

  • Aluminum Heater Block: Works perfect with nozzle and nozzle throat..
  • Stainless Steel Throat: 3D printer parts aluminum heater block extruder hotend kit is replacement parts for Ender 3 /Ender 3 Pro / Ender 5 /Ender 5....
  • 0.4mm Brass Nozzles: The 3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy....
  • PTFE Teflon Bowden Tube : PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS,....
  • Excellent Cleaning Needles: The E3D nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break.....
Check Stock

Haldis 3D Red Lizard k1 V6 Hotend Assembled Plated Copper Hot end High Flow Rate Extrusion Head for Voron 2.4 Prusa I3 MK3 Titan BMG V2 Extruder 3D Printer Parts Red

  • 【INTEGRAL FRAME RIGID STRUCTURE】: 1:Protect the heat break from external force. 2:One-hand nozzle replacement more simplest without grasping the....
  • 【BI-METAL HEATBREAK】:High quality titanium alloy + plated copper,real bimetal material Copper and Titanium TC4. Titanium TC4 reduces heat upward....
  • 【PLATED COPPER HOT BLOCK】: Premium material with surface Nickel plating,Rated to 550 °C for even the most demanding tasks,Compatible with all....
  • 【PLATED COPPER PRINTING NOZZLE】: 0.4MM Standard nozzle,Non- stick, high performance, high temperature about 550°C, Excellent precision....
  • 【V6 J-HEAD HOTEND】: Compatible with all 1.75mm E3D V6 Makerbot 3D printer. For CREALITY CR-10 CR10S ENDER-3 V2 ENDER-3 PRO ENDER 5 ENDER-5 PRO....
Check Stock

HICTOP Ender 3 Hotend Ender 3 Pro Hotend 24V 40W Full Assembled Extruder Kit Accessories with Silicone Cover for Ender 3, Ender 3 Pro 3D Printer

  • 1 Fully assembled extruder, Plug and Play Ender 3 Pro Hotend, you do not need to cut it..
  • 2 Compatible with Ender 3, Ender 3S, Ender 3 Pro and similar 3D printer..
  • 3 There are 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, silicone cover, etc..
  • 4 24V high speed fan, lose heat quickly and efficiently.
  • nozzle and tube connect seamless, prevent material leaking and blocking..
  • 5. Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
Check Stock

Creality Ender 3 Original Extruder Assembled MK8 Hot End Kit for Ender 3 3D Pinter with Aluminum Heating Block and 0.4mm Nozzle

  • Creality 100% original and brand new Hot End Kit for Creality Ender 3, Ender 3X, Ender 3 Pro..
  • Work with different sizes of MK8 nozzles: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzles..
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V..
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)..
  • Suitable For Creality Ender 3, Ender 3X, Ender 3 Pro..
Check Stock

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

  • ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
  • 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
  • ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

ENOMAKER Creality Sonic Pad in Klipper Firmware 64-bit 3D Printing Smart Pad 7" Touch Control Screen Speed Up Printing Remote Control for Creality Ender 3 V2，Ender 3 S1/Pro and Other FDM 3D Printers

  • 【Advantages of Klipper Firmware】It is able to achieve high-precision stepper motor motion control, thus ensuring the stability of the printer at a faster 3D printing speed. The unique pressure compensation function is to reduce the nozzle overflow by compensating the pressure inside the nozzle. Resonance suppression can reduce the system vibration and reduce the striations on the model surface..
  • 【Speed up Printing without Qaulity Loss】This 3d printing Pad uses precise algorithms to control the motors for faster printing speed. The built-in input shaper function will mitigate oscillation during high-speed printing and keep the model quality smooth..
  • 【Wide Compatiblity】The Creality 3d pad is compatible with most FDM printers that come with a USB interface. The user-defined printer compilation function is integrated into the Sonic Pad, making it much easier to use Sonic Pad with non-Creality printers than before. Pre-configured Ender 3 V2, Ender 3 S1, Ender 3 S1 Pro, Ender-3 Pro, Ender 3 S1 Plus, Ender3 MAX, Ender 5 Plus, CR-10 Smart, CR-10S Pro V2, CR-10 V3. The rest of Creali....
Check Stock

Micro Swiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers

  • Fits: CR-10 / CR-10-S5 / CR-10-S4 / CR-10S / CR-10 MINI / CR-20 / CR-20 Pro / Ender 2 / Ender 3 / Ender 3 Pro.
Check Stock

Hardened Steel Nozzle 0.4 mm/ 1.75 mm 3D Printer MK8 Nozzles Tool High Temperature Wear Resistant Compatible with Makerbot Creality CR-10 All Metal Hotend Ender 3/ Ender3 pro Prusa i3 5 Pieces

  • Durable material: MK8 extruder nozzles are made of hardened tool steel, good abrasion resistance, heat resistance and corrosion resistance, sturdy....
  • Good performance: this hardened tool steel nozzle has higher toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but....
  • High precision: the inner wall of the MK8 nozzles is smooth and has no burrs, the viscosity coefficient is small, extruder nozzle diameter error less....
  • Compatibility: these 3D printer nozzles compatible with MK8 hotend for Creality 3D printers, such as Ender-2/ Ender-3/ Ender-3 pro/ Ender-5, also....
  • What you get: package comes with 5 pieces of black MK8 nozzles, the size is 0.4 mm, sufficient quantity to facilitate your timely replacement,....
Check Stock

Official Creality Ender 3 S1 Pro 3D Printer with 300°C High-Temperature Nozzles,Sprite Metal Direct Extruder,Removable PEI Spring Platform,CR Touch Auto Leveling,LED Light,Print Size 8.6×8.6×10.6in

  • 【300°C High-Temperature Nozzles】: The Ender 3 S1 Pro 3d printer's nozzle made of brass can stand up to 300℃ printing. It is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, creating numerous possibilities for the imagination. There is no need to change the nozzle even printing with different filaments, which is time-saving with enhanced efficiency..
  • 【"Sprite" Full-Metal Dual-Gear Direct Extruder】: Ender 3 S1 Pro uses the self-developed “Sprite” full Metal Dual-gear Direct Extruder. Same as its name, “Sprite”, it is small but powerful - weighing only 334g, but the extrusion force can be up to 80N. It enables smooth feeding when printing with diverse filaments, including those flexible materials, providing users with a stable and reliable printing journey..
  • 【CR Touch Auto Leveling & 4.3-inch Color Touch Screen】: Equipped with CR Touch, the 16-points automatic leveling ensures perfect leveling by measuring the distance between the nozzle and the heat bed and accurately completes compensation. The 4.3-inch color touch screen enables click-to-control. It supports the switch among nine languages, making the printer more manageable for people from various regions worldwide. Therefore, Ender 3 S1 Pro is....
Check Stock

Creality 3D Printer Ender 3 S1 Pro 300℃ High-Temp Nozzle Sprite Full Metal Direct Drive Extruder CR Touch Auto Leveling PEI Bed Filament Sensor Printing Size 10.6X8.6X8.6inches

  • 【High-temp Passion, Good with Multiple Filaments】: For creality ender 3 s1 pro 3d printers, the most attracting thing is its good performance under high-temp conditions. The nozzle made of brass can stand up to 300℃ printing. It is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, creating numerous possibilities for the imagination. There is no need to change the nozzle even printing with different filaments, which is time-saving with enhanced efficiency..
  • 【“Sprite”, Small but Powerful】: Creality 3d printers uses the self-developed “Sprite” full Metal Dual-gear Direct Extruder. Same as its name, “Sprite”, it is small but powerful - weighing only 334g, but the extrusion force can be up to 80N. It enables smooth feeding when printing with diverse filaments, including those flexible materials, providing users with a stable and reliable printing journey..
  • 【Hassle-free Leveling】: This creality 3d printer equipped with CR Touch, the automatic leveling ensures perfect leveling by measuring the distance between the nozzle and the heat bed and accurately completes compensation. Therefore, Ender-3 S1 Pro is friendly,....
Check Stock

3D Printer Extruder Nozzles 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm for Anet A8 Makerbot MK8 Creality CR-10 Ender 3 Ender 5 IRCHLYN 40 Pcs

  • 【Package include】: Total 40Pcs printer nozzles for 3D printer.
  • 10Pcs 0.4mm nozzles, 5 Pcs nozzles for each size 0.2mm 0.3mm 0.5mm 0.6mm 0.8mm....
  • 【Printer Nozzle Parameter】: Input diameter: 1.75mm, Nozzle precision: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm, Screw thread: M6, Easy to find....
  • 【Durable Material】: Ender 3 printer nozzles are made of premium brass material, sturdy and durable.
  • Fit to most non-abrasive materials such as....
  • 【Application】: 3D Printer Extruder Nozzles fit to replace all external M6 thread connection, like Ender 3, Ender 2 Creality CR-10, Makerbot Anet....
  • 【100% Satisfaction】: Your satisfaction is our priority. Please feel free to contact us if there is any problem after you received the Brass....
Check Stock

Micro Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm

  • Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 / TronXY X5S.
  • Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock.
  • This is a Drop in All Metal Conversion Kit for CR-10 printers.
Check Stock