Categories

Best Npt Air Fittings Adapter

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • ...Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • 13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

20 Pieces Air Compressor Accessory Kit, 1/4″ x 25 Feet Hybrid Air Hose, 1/4″ NPT Air Tool Kit with Tire Inflator Gauge, Blow Gun and Air Hose Fittings

  • This air hose is blended rubber and pvc material for heavy duty, lightweight, flexibility, abrasion resistance and all weather use..
  • Equiped with 1/4″ industrial NPT fittings and quick coupler for directly connect to air compressor and air tools..
  • 1/4″ inner diameter by 25′ length, delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure..
  • 20 pieces air tool parts includes Tire Inflator with Gauge,blow gun,rubber tip,metal tip,inflation needle,tapered nozzle,safety nozzle,Air Clean Tool adapter,1/4″ MNPT industrial plug,1/4″ FNPT industrial coupler,1/4″-18NPT Male Connector,1/4″-18NPT Female Connector,Teflon Tape..
  • This Heavy Duty Air Compressor Accessory Kit is ideal for garage, shop, industry, home and many other uses..
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

  • ...nnot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
  • 【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
  • 【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
  • 【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized finish for corrosion protection. Features: anti-rust, waterproof, oil-proof..
  • Six-month warranty provides by SINTLY. If you have any questions, please contact u....
Check Stock

WYNNsky Industrial Air Coupler and Plug Kit, 3/8 Inch High Flow Body Size, 1/4 Inch NPT Threads Size, Steel Material, 9 Pieces Air Compressor Hose Accessories Fittings

  • 3/8 High Flow Body Size: 3/8 Inch body size air fittings provide up to 70% more air flow than 1/4 Inch body air fittings, 1/4 Inch body air fittings provide 35 SCFM at 100PSI working pressure..
  • Air Fittings Standard: There is six locking balls in the coupler which hold the plug securely, sleeve guard is designed to reduce the potential of accidental disconnects for consistent performance. 300PSI of Max Working Pressure..
  • Application: This 3/8 Inch body size with 1/4 Inch NPT threads size air coupler and plug is used to connect components to an air compressor. 1/4 Inch NPT threads size compatible with most air tools and air hose. These fittings can be used with other brands’ fittings with same type and body size. Seal tap is needed..
  • Material: Heat-treated steel air plug which features higher corrosion resistance and longer life. Zine-Plated steel coupler for added durability and reliability..
  • This 9 Pieces air fittings kit including 1pc 1/4 Inch MNPT coupler, 2pcs 1/4 Inch FNPT coupler, 4pcs 1/4 Inch MNPT plug, 2 pcs 1/4 Inch FNPT plug. WYNNsky is committed to providing outstanding value, top customer service and long-lasting, high-quality products to our customer..
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

Sunluway 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool and High Pressure Oil Rail Adapters Leak Test Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: Perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these adapter fittings show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting: This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Fittings, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

  • ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
  • ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
  • ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
  • ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
  • ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock

Dixon Air King AM7SWIV Iron Air Hose Fitting, Universal Swivel, 3/4\ NPT Male

  • Universal swivel fittings interchange with other Air King fittings and include a heavy-duty, free-turning joint that swivels under pressure to prevent hose kinking.
Check Stock

U.S Solid Brass Hose Fitting Adapter 3/4 Barb x 3/4 NPT Male Pipe Fittings

  • FUNCTION - This 3/4" Barb x 3/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
  • DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
  • THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
  • MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
  • WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

U.S. Solid Brass Hose Fitting, Adapter, 1/4\ Barb x 1/4\ NPT Male Pipe Fittings

  • FUNCTION - This 1/4" Barb x 1/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
  • DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
  • THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
  • MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
  • WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock