Categories

Best Npt Fittings

Bswox Bottle openers,Bottle Opener with Magnetic Cap Catcher - Pop Can Opener – Stick to Refrigerator for Easy Storage to Avoid Loss - Easy Picking-up

  • SIZE - 1/2" Steel Pipe, 30 Inches (76.2cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 1/2" fittings..
  • NOTE - These pipes are PAINTED BLACK, if protective painting at both ends makes pipes hard to screw into fittings, please remove the black painting. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 1/2" pipes. (O.D. of these pipes: 20.2mm.
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES - Please find more fittings and pipes from our store, we offer the most comprehensive range of fittings and pipes to meet ALL your needs. You can also find standard NPT 1/2.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock

NQN 12 Foot 0-30 PSI High Pressure Adjustable Propane Regulator with Gauge 0~60PSI Gas Flow Indicator, Gas Cooker 3/8inch Female Flare Fitting, Stainless Steel Braided Hose and Gas Grill LP Regulator

  • Flare Male, 3/8" Flare Male x 3/8" Flare Male, 1/4" NPT Male x 3/8" Flare Male, 1/8" NPT Male x 3/8" Flare Male, 3/8" Brass Gas Ball Valve. These conversion connection extand the outdoor.
  • 【Premium Material】3/8" female flare fittings on both ends and 7 different types of adapters fittings kit of this 3/8" propane hose are made of 100% Solid Brass to ensure secure and durable for long-lasting to use. The 3/8” Female Flare propane hose is made of durable stainless steel braided with anti corrosion, anti-aging, air tightness, heat-resistance, flexibility features. This propane extension hose with CSA Certification, ensures air tightness and stability. High Pressure: 350 PSI..
  • 【Standard Fittings】This 3/8" Female Fitting x 3/8" Female Fitting Propane Hose comes with 7 different types of adapter adapters. Excellent 3/8" Propane Hose Conversion Adapter Kit for easy storage and portability, flexible use and space saving. This 12ft Braided Stainless Steel High Pressure Propane Extension Hose comes with a standard connector kit to take all your worries away. For RVs Best choice, travel trailer..
Check Stock

GeilSpace 6 Pack 1/2\ × 16\ Pre-Cut Black Metal Pipe, Industrial Steel Fits Standard Half Inch Black Threaded Pipes and Fittings - Vintage DIY Industrial Shelving (1/2\ × 16\

  • SIZE - 1/2" Steel Pipe, 16 Inches (40.6cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 1/2" fittings..
  • NOTE - These pipes are PAINTED BLACK, if protective painting at both ends makes pipes hard to screw into fittings, please remove the black painting. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 1/2" pipes. (O.D. of these pipes: 20.2mm.
  • MATERIAL & PRODUCTS - GeilSpace Pipes are designed with a standard industrial finish.
  • materials and threads constructed from sturdy metal.
  • Unlike most other products on Amazon with grey looking and oily surface, surface of these product series is clean and PAINTED black, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES - Please find more fittings and pipes from our store, we o....
Check Stock

GeilSpace 6 Pack 3/4\ × 14\ Pre-Cut Black Metal Pipe, Industrial Steel Fits Standard Three Quarters Inch Black Threaded Pipes and Fittings - Vintage DIY Industrial Shelving (3/4\ × 14\

  • SIZE - 3/4" Steel Pipe, 14 Inches (35.6cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 3/4" fittings..
  • NOTE - These pipes are PAINTED BLACK, if protective paint at both ends makes pipes hard to screw into fittings, please remove the black paint. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 3/4" pipes. (O.D. of these pipes: 25.5mm.
  • MATERIAL & PRODUCTS - GeilSpace Pipes are designed with a standard industrial finish.
  • materials and threads constructed from sturdy metal.
  • Unlike most other products on Amazon with grey looking and oily surface, surface of these product series is clean and PAINTED black, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES - Please find more fittings and pipes from our store, we offer t....
Check Stock

MOTOKU New HSS 1/16-27 NPT Taper Pipe Thread Tap

  • Cuts internal threads in pipes. Ideal for pipe fittings..
  • Nominal size of the tap is that of the pipe fitting being tapped.
  • Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP).
  • Includes one taper tap each of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt, and 1" - 11-1/2 npt. Made in the USA..
Check Stock

Legines Brass Pipe Fitting Hex Bushing 3/8 NPT Male to 1/4 NPT Female 1200psi 2pcs

  • Hex bushing for connecting two pipes with different diameters.
  • 3/8" Male NPT threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250....
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

SUNGATOR 3 Pack Barbed Brass Hose Fittings 1/2 Barb to 1/2 NPT Male Threaded End Fittings Hose Connector Adapter with Sealing Tape and Hose Clamps

  • 【SIZE AND PACKAGING】: 1/2"barb X 1/2"NPT male pipe, package includes 3 hose barb fittings, 1 sealing tape, 3 hose clamps.
  • 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
  • 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel as well as air tools.
Check Stock

SUNGATOR Brass Barbed Hose Fittings 1 Barb to 1 NPT Male Threaded End Hose Barb Pipe Fittings Hose Adapter Connector with Sealing Tape and Hose Clamps 2 Pack

  • 【SIZE AND PACKAGING】: 1"barb X 1"NPT male pipe, package includes 2 hose barb fittings, 1 sealing tape, 2 hose clamps.
  • 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
  • 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel.
Check Stock

Class A Customs | UM-1500 | One (1) UnderMount 15 Gallon RV Fresh and Gray Water Holding Tank RV Concession

  • 15 Gallon Capacity Fresh or Gray Water Holding Tank Manufactured by Class A Customs - NSF CSA Approved - Fresh & Drinking Water Safe - BPA FREE.
  • WATER TANK MEASUREMENTS: 36 Longest Length (not including fittings) x 8.5 height x 13 width Average thickness 7/32 +/- (+/- .25" on each measurement) Designed to fit between the cross members of trailers.
  • TANK BUILT-IN FITTINGS: 2 (Two) 1 " Dia screw in balloon fittings (threaded female - NPT Standard) fitting will be closed, to use remove inner membrane with razor knife 2 (Two) " Dia screw in fittings (threaded female - NPT Standard).
  • NON-PRESSURIZED TANK: you will need to vent this tank to use it, letting air in and out during use. Do NOT hook garden hose to tank use a fill dish..
Check Stock

Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34.5” Longest Length (not including fittings) x 12” x 17.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
Check Stock