Categories

Best Npt Taps

XtremeAmazing Set of 5 HSS NPT Pipe Tap Set 1/8, 1/4, 3/8, 1/2 and 3/4 Inch

  • Taps Size: 1/8''-27 NPT, 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT.
  • High quality HSS material, cutting edges clean and sharp..
  • With a center hole drilled in all taps, easy to use in a drill press..
  • Package Contents: 5 x NPT Pipe Tap SetHigh quality HSS material, cutting edges clean and sharp..
Check Stock

Lisle 83100 External Torx Plus Socket Set, 9pc

  • For Use in Restricted Areas. Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards. Sockets contained on a vinyl holder..
  • Ideal for use in areas where a T handle won't fit..
  • Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2"..
  • Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards..
  • Ideal for use in areas where a T handle won't fit.
  • Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2 inch.
Check Stock

HORUSDY 6-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14NPT, 1"-11.5NPT. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
  • Uncoated tools have only the base material and do not need any additional treatment or coating, so they can be widely used..
Check Stock

YG-1 - J0283 J0 Series Vanadium Alloy HSS Spiral Pointed Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, 8-32 Thread Size, H3 Tolerance

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

HORUSDY 5-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

Hanson 12008 1\ Rd Hex Plain Die Stock for Tap Die Extraction

  • CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die h....
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

RIDGID 44923 Model 690-I Hand-Held Power Drive Kit, Pipe Threading Machine and 1/2-Inch to 2-Inch 11-R NPT Pipe Threading Die Heads with Carrying Case for Threading Pipe

  • CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die h....
Check Stock

1\ NPT Pipe Carbon Hex Rethreading Die

  • ...cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
  • ▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
  • Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
  • ▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.
Check Stock

Lisle 70860 Tap Socket

  • Ideal for use in areas where a T handle won't fit.
  • Sockets fits all number and fractional M.C.T.I. standard taps through 1/2".
  • Also fits 1/8" NPT taps and metric taps through 12mm manufactured to M.C.T.I. standards.
  • For more information check the main Lisle tool- 70940.
Check Stock

HORUSDY 60-Piece Master Tap and Die Set | SAE Inch and Metric Sizes | for Coarse and Fine Threads Tools

  • Made of high-quality hardened alloy steel, durable and superior strength. Suitable for cutting steel, copper, aluminum, cast iron and other materials..
  • Suitable for re-threading of fasteners and fastener holes, cutting or updating of internal and external threads. Precision milling of SAE and metric taps and molds are used for cutting raw materials or repairing existing threads, removing screws, etc..
  • All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance..
  • Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • Heavy-duty plastic suitcase, easy to transport, safe storage, quick to organize, prevent accessories from falling off..
Check Stock

HORUSDY 40-Piece SAE Tap and Die Set, Inch Sizes for Coarse and Fine Threads Tool with Storage Case

  • Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses. Suitable for cutting steel, copper, aluminum, cast iron and other materials..
  • Suitable for re-threading of fasteners and fastener holes, cutting or updating of internal and external threads. Precision milling of SAE taps and molds are used for cutting raw materials or repairing existing threads, removing screws, etc..
  • All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance..
  • Set includes (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • Heavy-duty plastic suitcase, easy to transport, safe storage, quick to organize, prevent accessories from falling off..
Check Stock