Categories

Best Ntc Temperature Sensor

4pcs Temperature Controller Module with Case W1209 12V DC Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with Waterproof NTC Probe

  • ...LED display, and a relay.100% complete machine patch, wave soldering, stable performance, good consistency..
  • 【Embedded CPU Chip】The XH-W1209 led display digital thermostat module embedded CPU chip (MCU), is more intelligent, lower power consumption.
  • Automatic power set memory, MCU built-in EEPROM memory unit..
  • 【Temperature Controller Parameter】Temperature range: -50-110°C.
  • Control precision: 0.1 celsius.Input power (DC): 12V.
  • Output: 1 channel relay output, capacity: 10A.
  • 【Waterproof NTC Probe】The NTC probe is waterproof and can control the temperature, allowing to control heating or cooling.(The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin, which can protect the inside to prevent scratches.
  • And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.).
  • 【Package Includes】4pcs W1209 12V DC digital temperature controller board with case.(Ps: The product is not assembled, if you need assembly instructions or if you encounter any problems during use, you can contact us at any time. Thank you for ....
Check Stock

weideer Digital Thermometer Dual LED Display Fahrenheit to Centigrade Adjustable DC 4-28V -67~+248℉/-55～+120℃ High Accuracy Temperature Gauge Sensor with 2 Waterproof NTC Probes K-017

  • Multifunctional thermometer that can be used as a Fahrenheit thermometer. It can also be used as a Celsius thermometer. Multi-function switching can be achieved through button adjustment. Equipped with 2 waterproof NTC probes, the thermometer can measure the temperature in 2 different locations at the same time. Clear red and blue display for clear temperature reading..
  • The green wire is the positive pole of the power supply, and the black wire is the negative pole of the power supply..
  • Device size:28.8x19.3x74mm/1.1"x07"x1.8"Probes Wire length：100mm/39.3"；NTC Probes size:4.9mmx25mm/0.2"x0.98"；Power line:15mm/0.59".
  • Measure water temperature inside and outside the car / inside and outside the air-conditioned room / inside and outside the refrigerator / fish pond.
  • Package includes:1Pcs Dual Display Digital Thermometer.
Check Stock

Adafruit Power Management IC Development Tools Precision LM4040 Voltage Reference Breakout - 2.048V and 4.096V 1 Piece

  • DHT11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor..
  • It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and....
  • Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller....
  • The product has excellent quality, fast response, anti-interference ability, high cost and other advantages..
  • The single-wire wiring scheme makes it easy to be integrated to other applications.And the simple communication protocol greatly reduces the....
Check Stock

2pcs STC-1000 Digital Temperature Controller DC 12V 10A Digital LED Temperature Controller Thermostat Control Switch 2 Relay Output Cooling Heating and NTC Sensor Probe

  • 【STC-1000 Digital Temperature Controller】Temperature Control Range: -50℃~99℃. Control Accuracy: ±1℃. Control temperature by setting the temperature setting value and the difference value.
  • Temperature calibration. Easy operation, to set start temperature, stop temperature, corrected temperature correction, delay start..
  • 【STC 1000 Digital Thermostat】This STC-1000 digital dual relay thermostat is made of ABS flame retardant shell, a variety of fields perfect use, convenient operation and practical settings..
  • 【Heating and Cooling Function】Two work mode: Heating ( start temperature is less than stop temperature).
  • Cooling ( start temperature is above than stop temperature). Refrigerating contro, output delay protection..
  • 【NTC Waterproof Sensor Probe】Digital temperature controller 12V is equipped with 1M waterproof probe, can be used in moisture and water environment, you can use it in home brewing, fridge, incubation, fermentation, seedling heat mat, accelerating germination..
  • 【Package Contains】2 Pack STC-1000 temperature controller thermostat control switch 2 relay output cooling heating and ntc 10k thermistor sensors temperature probe. (Please kindly note no outlets, wirring needed.
Check Stock

WINSINN HT-NTC100K Thermistor Sensor Ender 3 v2 Upgrade 3x15 3950 XH2.54 2Pin Compatible with Ender 3 5 Pro CR6 CR10 Series 3D Printer Hotend Pack of 5Pcs

  • ✔️Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm.
  • ✔️The temperature measurement: -50 °C ~ +350 °C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature....
  • ✔️Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement..
  • ✔️HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
  • ✔️Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees)..
Check Stock

UMLIFE 2PCS Temperature Controller Module with Case, XH W1209 LED Display Digital Thermostat Module with Waterproof NTC Probe -50~110 Electronic Temperature Temp Control Module Switch

  • The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting..
  • Temperature Measurement Range: -50~110. Control Precision: 0.1 celsius.Input Power (DC): 12V.
  • Output: 1 Channel Relay Output, Capacity: 10A.
  • Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices..
  • The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature..
  • The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or coolingNote: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)..
Check Stock

Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays Only ITC-1000 Probe

  • Temperature Measuring Range: -50～210 F / -50 ～ 99 C.
  • Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC).
Check Stock

CrocSee NTC 10K 5 Meters Temperature Sensor Probe

  • Measuring temperature range: -45°C to +110°C (-49°F to +230°F).
  • The Temperature Sensor Probe can be used for bayite, WILLHI, STC1000 series temperature controllers..
Check Stock

XINGYHENG STC-1000 DC 12V 10A Microcomputer Digital Display Temperature Controller Thermostat Control Switch 2 Relay Output and NTC 10K Thermistor Sensors Digital Temperature Probe (12V)

  • Super material: STC-1000 intelligent thermostat is an independent product, ABS flame retardant shell, a variety of fields perfect use, convenient operation and practical Settings, is your side temperature control housekeeper..
  • Package including: 1 Pack of STC-1000 intelligent thermosta module, which is equipped with 1pcs NTC 10K temperature probe. The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling..
  • STC-1000 Digital Thermostat specification: Temperature control range: -50-99°C. Control accuracy of 0.1 degrees Celsius. Control temperature by setting the temperature setting value and the difference value.
  • Temperature calibration. Easy operation, to set start temperature, stop temperature, corrected temperature correction, delay start..
  • High Power High Efficiency: Two Work Mode: Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature) It is precise and reliable with good long-term stability. Refrigerating contro,l output delay protection.Alarm when temperature exceeds temperature limit or when sensor error..
  • A wide range of applications: temperature controller is equipped with over 40’’ inch waterproof probe can be us....
Check Stock

Resideo WT8840B1000 Water Heater Gas Control Valve NAT 160 Degree F 1 Cavity

  • Temperature ratings: ambient-- 0 c to 60 c. Inlet/Outlet Size (in.) - 1/2 inch. NPT x 1/2 inch. Inverted Flare. Capacity - Min. 30 ft3/hr, Max. 75ft3/hr.
  • Pressure regulator setting (psi): 5.0 in. Wc.
  • An included integrated NTC temperature sensor reads water temperature within the appliance up to 221 F (105 C).
Check Stock

uxcell NTC Thermistors Resistor MF52-103/3435 10K Ohm Inrush Current Limiter Temperature Sensor Pack of 40

  • 【Quality】 - Directly Inserted Negative Temperature NTC Thermistors have large material constant, large B value, with small residual resistance.Thermal shock resistance, with wide range of operating temperature..
  • 【Feature】 - The NTC thermistors are reliable and stable, with wide range of over-current control..
  • 【Advantage】 - With small size and large power, NTC thermistors have strong capacity to inhibit surge current..
  • 【Application】 - NTC Thermistor is widely used for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..
Check Stock

KETOTEK KT8230 Digital Temperature Controller Thermostat Regulator 120VAC 30A Fahrenheit -22~572℉ Heating Cooling for Incubator Brooder Refrigerator Fermenter Greenhouse Reptile

  • 【Wide temperature range.】The range for KT8230 is -22~572℉, This is a relay temperature controller, There is no voltage output directly, you need to connect additional power supply for the load, then it can be set by differential (1~80℉) to turn on/off the load, it is like a switch..
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range..
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F～30.0°F calibrate the temperature when there is error..
  • 【Safe protection.】Temperature Regulator will alarm when it exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low(LS) and high temperature limit(HS) to change the temperature range, LS < Setting Temperature < HS..
  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home.
Check Stock

uxcell 20PCS NTC Thermistors Resistors MF58 3950B 10K Ohm Glass Sealed Temperature Sensors

  • Made of high-quality materials and has a long service life..
  • Small size, fast reflection speed, stable operation for a long time, good consistency..
  • NTC (negative temperature coefficient) thermistor, its resistance decreases with increasing temperature. High resistance and B value accuracy.
  • Widely used in air conditioning equipment, heating equipment, electronic thermometers, liquid level sensors, etc..
  • Material: Oxide film. Temperature coefficient: NTC. Rated power: 0.25w. Package includes: 20 x NTC thermistor..
Check Stock