Categories

Best Numerical Hydraulic Die Forging

Vertical Plate Lifting Clamp 3T - Industrial Steel Hoist Hook Chain 6614lbs Jaw Opening up to 1.2 Inch for Lifting and Transporting

  • Stainless steel forging, body casting process.
  • High-frequency quenching of jaws, wear-resistant.
Check Stock

VEVOR Hydraulic Pipe Crimping Tool Copper Crimping Pliers with Jaws 1/2 12.7mm 3/4 19.05mm 1 25.4mm 10T Hydraulic Copper Tube Fittings Crimper 40CR Steel for Copper Tube Plumbing and Fitting

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping....
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This....
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an....
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic....
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied....
Check Stock

TEMCo TH0370 Dimple Die Set Tool Kit 8pcs: 1/2' 3/4' 1' 1-1/4' 1-1/2' 1-3/4' 2' 2-1/2'

  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size).
  • This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372..
Check Stock

CBRIGHT 2 Pieces 6mm Female Thread Connector Bearing Steel Joint Rod End Bearing

  • Products can withstand radial load,Axial load or radial. Axial simultaneous joint load..
  • Due to the inner surface of the spherical inlaid composite material,therefore, the bearing in the work can produce self-lubricating..
  • Use: Joint bearings are widely used in engineering hydraulic cylinders, forging machine tools, engineering machinery, automation equipment, automotive shock absorbers, water conservancy machinery, etc..
  • 2 Pieces 6mm Female Thread Connector Joint Rod End Bearing.
Check Stock

CBRIGHT 4 Pieces 6mm Female Thread Connector Bearing Steel Joint Rod End Bearing

  • Products can withstand radial load,Axial load or radial..
  • Product Material: bearing steel. Axial simultaneous joint load..
  • Use: Joint bearings are widely used in engineering hydraulic cylinders, forging machine tools, engineering machinery, automation equipment, automotive shock absorbers, water conservancy machinery, etc..
  • Due to the inner surface of the spherical inlaid composite material,therefore, the bearing in the work can produce self-lubricating..
  • 4 Pieces 6mm Female Thread Connector Joint Rod End Bearing.
Check Stock

Greenlee 7304 Knockout Punch Driver Kit

  • Set contains 4 punch and die sets, and high impact plastic case.
  • Use with battery-powered, hydraulic, ratchet or manual drivers.
  • Properly assembled through pilot holes, they will make clean, fast and accurate holes.
Check Stock

Affordable Bender ab103 1-1/2" Hydraulic Tube Bender

  • Fully Hydraulic via an 8 Ton Bottle Jack.
Check Stock

SPEX 6775-115 Freezer/Mill, Small, 115V, 60 Hz

  • Accepts all SPEX Sample Prep Evacuable Pellet Die Sets.
  • Can be operated anywhere in the world, even under the most primitive conditions.
  • Economical alternative to motorized presses for labs with a small sample load.
  • Hardened steel buffer plate is engraved with concentric circles and enables easy centering of the die.
  • Manual, hydraulic laboratory press with buffer plate.
Check Stock

SWAG Off Road 20 TON Finger Brake Heavy Duty DIY Builder Kit

  • Attach to Most Standard 12-Ton or 20-Ton Hydraulic Shop....
  • Upper Die Mounting Cup Inside Diameter: 41....
  • Overall Dimensions: 14.50 in. Wide x 7.50 in. Deep x 9.25 in. High JEGS 81492 Press Break Attachment for 12-Ton or 20-Ton hydraulic shop presses makes....
  • Bends mild steel and aluminum with a maximum width of 12 in. and thickness of 3/8....
Check Stock

Lenz Replacement Filter Element - 10 Micron Hydraulic Filter Canister - Hydraulic Return Filter, 20 Max GPM, 200 Max PSI, 1”-12 UNF Thread Size - Spin-on Replacement Filter for Hydraulic Systems, 1 lb

  • SPECIFICATIONS: The Lenz 10 micron hydraulic filter replacement canister has a 20 GPM maximum flow rate with 200 PSI maximum working pressure. It has 1”-12 UNF thread size, operates in -22° F to +212° F temperature and weighs 1 lb (0.4 kg)..
  • DUAL APPLICATION: Our replacement for hydraulic fuel systems is versatile. It can be used in the return line of hydraulic systems. It offers a maximum flow rate of 20 GPM for return lines..
  • MADE TO LAST: With an aluminum die cast body and Buna-N seals, this spin-on fuel filter is durable and withstands high temperatures as well as corrosive fluids. This 10-micron filter can be easily used under harsh conditions..
  • DISPOSABLE: The spin-on hydraulic oil filter canister is designed to remove contaminants from petroleum-based, high water, water glycols, and water/oil emulsions fluids. Our hydraulic filter 10 micron is easily replaceable..
  • EASY ASSEMBLY: Our hydraulic return filter kit replacement part offers spin-on assembly and can be easily installed without any special equipment. It is easy to use and portable since it weighs only 1 lb..
Check Stock

Senmit 10 Ton Hydraulic Cable Crimper Hand Tool for 1/8, 3/16 Stainless Steel Cable Railing Fittings, Heavy Duty Head, Come with 8 Pairs Dies and Cable Cutter

  • 【COMPLETE CRIMPER KIT】: This cable crimper includes everything you need for a smooth and user-friendly experience: hydraulic crimper, Cable Cutter, 8 dies (Comes with crimping dies for 12 AWG, 10 AWG, 9 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG and 2/0 AWG) and a portable, heavy-duty storage case..
  • 【CAPACITY】: This industrial lug crimper has a true 10 US ton capacity, being designed for 1/8 (6 mm Die) 3/16 (10 mm Die) stainless steel cable railing and aluminum or copper wire, providing perfect crimp terminations with every use..
  • 【HEAVY DUTY DURABLE CONSTRUCTION】: The head of crimper is made of durable steel with stainless steel coating, strength and good toughness. The Oxide Crimp Head and Dies won't chip or flake. Dies are made of more hardened 40cr steel, this cable crimper is much better than classic chrome-plated models, for an enhanced performance..
  • 【WIDE APPLICATIONS】: Whether for battery and welding cable, building wiring, crimp heavy cast terminal lugs, this premium quality hydraulic cable crimper will do an outstanding job..
  • 【EASY TO USE】: 4 steps to perfect....
Check Stock

VEVOR Hydraulic Cylinder Liner Puller 15 Ton Liner Puller Tool, Both Dry-Type and Wet-Type Fit Diameter of 80mm-140 mm, Universal Cylinder Liner Puller Tool Set for auto Repair and Disassembly

  • 15t Hydraulic Puller: Max Capacity: 15T. This hydraulic cylinder puller is suitable for all cylinders with a diameter of 80-140 mm. Both dry type and wet type can be used. It's ideal for the disassembly of internal combustion engine and cylinder liner..
  • Superior Quality: The hydraulic puller is made of premium steel and processed by precision forging. It is sturdy, corrosion-proof, and has stable performance. The support seats, lead screw, and screw nut are all thickened, which will be more durable..
  • Complete Puller Kit: A complete set of tools required for removing the internal combustion engine and cylinder liner. Every part is included, and they are easy to assemble. Our cylinder-pulling artifact can easily remove the cylinders without damage the original parts..
  • Easy Operation: This 15t cylinder liner puller is very simple to use. All you need to do is adjust the inner diameter of the cylinder liner that you need to pull out, and you can use it directly—no need to take down the crankshaft..
  • Wide Application: Suitable for the removal of internal combustion engines and cylinder liners. Also, suitable for pulling hubs, flanges, gears, bearings, and more. It is a great helper for the auto repair shop, garage, automobile maintenance..
Check Stock

uxcell PHSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Female Thread Right Hand

  • Type: 1/2" Hole x 1/2-20 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensure long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock