Categories

Best Nut Brown Studs

FASHEWELRY 16Pcs Wood Stud Earring Posts with Loop Teardrop Rhombus Oval Flat Round Wood Stud Earring with Ear Nuts for DIY Wooden Earrings Making (CoconutBrown)

  • PACKAGE INCLUDE: 4pcs x 4 shape wood stud earring findings, they are teardrop, rhombus, oval, flat round shape.
  • MEASUREMENT: wood stud earring finding: 15.5~16.5x10.5~16.5x2.5mm, hole: 1.5mm, pin: 0.6mm.
  • ear nut: 4x4mm, hole: 0.5mm. (For detailed dimensions, please browse the product description below.).
  • MATERIAL: made of good quality wood with coconutbrown color, well polished, smooth surface, lightweight and comfortable to wear..
  • EASY TO USE: the loop allows you to match with jump rings to hang beaded dangles. You can easily make simple but elegant drop earrings..
  • GREAT FOR DIY: various shapes wood earring studs for you to choose, also allow you to DIY your earring finding with some small Jewelry accessories, earring studs come with earring backs, it can match ear studs well, convenient for you earring making..
Check Stock

Mostbest Head Stud Replacement Kit for SBC Cylinder Head Stud Set # 1525-Stud/ 279.1001

  • ❤️This kit has 14 long studs, 4 medium length, and 16 short studs..
  • ❤️ This listing is for the sbc head stud kit. We have used this kit on all of our sbc engine buildups, and the fitment is perfect. You will receive every stud needed to install both cylinder heads on your engine..
  • ❤️These head studs are made from aircraft quality 8740 high tensile strength chrome moly steel. They are twice as strong (190,000 psi steel alloy) as the stock head bolts. Kit that comes complete with 12 point hex nuts and washers. Very similar or rather identical in design and function to the ARP kits..
  • ❤️Studs make head installation a lot easier as the studs align the head and hold the head gasket in place.
  • ❤️ They clamp much better since the stud is loosely threaded into the block and the clamping torque is generated at the stud-nut interface rather than the block-bolt interface.
Check Stock

Fastronix 5/16' - 1/4' Stud Terminal Cover 2 Pack (Red)

  • Use with 5/16" or Smaller Studs to Fit over Nut.
  • Improve the Appearance of Your Power and Grounding Studs.
  • Use with Fastronix 406-251 Junction Blocks.
Check Stock

Disney Mickey Mouse Birthstone Silver Plated Stud Earrings, November Topaz Brown Crystal

  • Silver Plated Mickey Mouse November Topaz Brown Crystal Stud Earrings.
  • EXQUISITELY CRAFTED IN SILVER PLATED BRASS.
  • an original, modern and sweet look for anyone.
  • lovely stud earrings with a post and nut back for a safe and reliable closure.
  • GORGEOUS STUD EARRINGS shaped just like Disney’s most iconic character: Mickey Mouse. The Mickey studs are made with unique created birthstones to represent the month you were born or your favorite color.
  • READY FOR GIFT GIVING: Delivered in a beautiful gift box, these earrings are an ideal present for birthdays, Christmas, Mother’s Day, Valentine’s Day, anniversaries, or any gift-giving occasion.
  • FROM THE MANUFACTURER: Sally Rose is a curator of cross generational and timeless brands. We offer a wide range of products that your entire family will love, from beloved characters to trending brands. Aiming to be all inclusive, our product lines will be for everyone: women, men and everyone else. We offer affordable pieces, while never sacrificing on quality. Sally Rose will be the prime provider for all your jewelry needs.
Check Stock

Amazon Brand - Denali 7-Piece Hollow Shaft Nut Driver Set with Cushion Grip Handles

  • 7-piece nut driver set for tightening nuts and bolts.
  • Includes 7 nut drivers with chrome-plated 3-inch shafts.
  • Precision machined tips ensure an exact fit.
  • Hex Nut Sizes: 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2.
  • Cushion grip handles promote a secure, comfortable hold and optimal torque.
  • The product is covered by the Hand Tool Limited Lifetime Warranty.
Check Stock

Luckyway 13-Piece Impact Bolt & Nut Remover Set, Nut Extractor Socket, Bolt Remover Tool Set

  • DIMENSIONS-Include13pc3/8 inch drive bolt & nut remover comes with 1/4"(6.35mm),5/16"(8mm),3/8(9.5mm), 10mm, 7/16(11mm), 12mm, 1/2(12.7mm), 13mm, 9/16(14mm), 5/8(16mm), 17mm, 11/16(17.5mm), 3/4(19mm)..
  • APPLICATION -This damaged nut bolt remover with corrosion protection are designed for the removal of damaged bolts, screws and nuts..
  • MATERIAL- Durable high hardness chromium molybdenum steel..
  • FEATURES -100% new and high quality. Spiral cut teeth provide positive grip, remove circular or damaged bolts. Can be driven with a metric spanner or socket. Also be used on screw heads and studs..
  • Remove the nut is 13 sets of different sizes suitable for damaged, rusted nut bolt, this is taken as unscrew screws, nuts and the most important conducting stabilization tool..
Check Stock

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

  • What You Will Get: the package comes with 6 pieces of 8/32 inch M4 12 inch threaded rods and 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
  • Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
  • Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
  • Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
  • Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.
Check Stock

Mens Black Hex Nut Stud Earrings with Charcoal Crystal - Unisex Post Earrings, Hardware Jewelry

  • Modern black hex nut style earring studs with posts.
  • Black gunmetal plated hex nut shaped bezels: 3/8" tall by 3/8" wide.
  • Precision faceted crystal rhinestones in dark grey: 6mm dia (1/4").
  • Plated post: 1/2" long (set of earring backings included).
Check Stock

Floyd Rose Original 7 String Tremolo-Black FRT-S200K

  • Used by more professionals throughout the world than any other..
  • No copy can duplicate the double-locking design of the Floyd Rose Tremolo System that allows you to lock your guitar in tune at the nut and at the....
  • The Floyd Rose Tremolo System is engineered like no other tremolo system.
  • The tremolo kit contains the bridge, locking nut, springs & claw, mounting studs, and all hardware necessary for installation..
Check Stock

Thread Checker Lug Nut & Wheel Stud SWTC-LN8 Bundle with a Lumintrail Keychain Light

  • Lug Nut Thread Checker - Each size has a lug nut and wheel stud checker on the same gauge. Thread sizes are permanently stamped onto each gauge..
  • Wire Cable Thread Checker - The individual gauges rotate freely on the wire cable for fast thread verification..
  • Durable Tools - Built to last & manufactured from high grade aluminum..
  • The Lug Nut Thread Checker is an accurate and easy-to-use thread identifier for both lug nuts and wheel studs. Each individual gauge features a male threaded stud on one end to measure lug nut threads and a female threaded hole on the other to measure wheel stud threads..
  • Thread Gauge Size Specifications by Color: M14 x 2.00 - Gold.
  • 1/2-20 - Black. Bundle with a Lumintrail Keychain Light.
Check Stock

XtremeAmazing Double Locking Tremolo Bridge System Set for Floyd Rose Electric Guitar Black

  • Material: Alloy & copper & steel, anti-rust and stable, durable to use..
  • Package Contents: 1 x tremolo bridge, 1 x whammy bar, 1 x body mount claw, 2 x allen wrenches, 2 x studs, 2 x screws, 3 x springs, 1 x lock nutPackage Contents: 1 x tremolo bridge 1 x whammy bar 1 x body mount claw 2 x allen wrenches 2 x studs, 2 x screws 3 x springs 1 x lock nut.
  • If you have any installation problems, please feel free to contact us..
Check Stock

RockTrix - 1.5 inch Hubcentric Wheel Spacers No Lip (5x115, 71.5mm bore, 14x1.5 Studs) Compatible with 05-21 Chrysler 300, Dodge 09-21 Challenger, 06-21 Charger, 04-09 Magnum - Silver 38mm 5x4.53 2pcs

  • RockTrix Hubcentric Wheel Spacers without a Lip for 5/115 (5/4.53") Bolt Pattern Vehicles and 5/115 (5/4.53") Wheels. Buyers also need to verify: 1) Vehicle Hub Centerbore is 71.5mm.
  • 2) Wheel studs are M14x1.5 14x1.5mm threads.
  • 3) You have 1.5" (38mm) of space between your fender and your wheel/tire.
  • 4) Your factory wheel studs are shorter than 1.5" (38mm). NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit..
  • [FITMENT] Compatible with 2005-2021 Chrysler 300. Compatible with Dodge 2009-2021 Challenger, 2006-2021 Charger, 2004-2009 Magnum. May fit other vehicles, verify with spacer specifications..
  • [SPECIFICATIONS] Two (2) Wheel Spacers | Thickness: 1.5" (38mm) Wide | Bolt Pattern: 5x115 (5x4.53") | Hub Center Bore: 71.5mm | Stud/Nut Thread Pitch: 14x1.5 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs. Precise machined stud/nut threads prevents cross threading..
  • [PRODUCT BENEFITS] Hubcentric Spacer Bore fits perfectly around 71.5mm vehicle hubs to prevent wobble or vibrations, thereby eliminating the need to purchase hubcentric ....
Check Stock

Klein Tools 65160 Tool Set, Metric Nut Driver Set Sizes 5, 5.5, 6, 7, 8, 9, and 10 mm, 3-Inch Chrome-Plate Hollow Shafts, 7-Piece

  • Nut Drivers are standard length for most applications and fit over long bolts and studs.
  • Tool Set includes metric nut driver sizes 5, 5.5, 6, 7, 8, 9, and 10mm.
  • Internal flanges provide solid, twist-resistant shaft anchor.
  • Tip-Ident quickly identifies nut driver and size.
  • Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications.
  • Premium chrome plated shaft for smooth feel and corrosion resistance.
Check Stock