Categories

Best Nut Fittings

Frienda 12 Pieces 3/8 Inch-24 Threads Brake Line Fittings Assortment for 3/16 Inch Tube (4 Unions, 8 Nuts)

  • Fit for: the unions measures approx. 0.6 x 0.9 inch, the nut measures approx. 0.67 x 3/8 inch, fit for most common inverted flare or double flare sizes for 3/16 inch tube, for use with 3/16 inch steel, poly coated or copper brake lines.
  • Please confirm the size of the details according to the picture before purchasing.
  • Size and material: both the unions and nuts are metric 3/8-24 threads (regular 3/16 inch tube fitting size), all brake line fittings are made of quality brass to prevent rust and plated for corrosion resistance.
  • You will get: 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts, you can share them with your family and friends, these tubes unions are good fittings.
  • Inverted flare union: these unions are a nice option to join 2 (3/16 inch) brake lines together.
  • Brake line fitting connect: the nut is called the fitting for 3/16 inch tube, these unions fittings have a hex size of 3/8 inch and the threads are 3/8 inch with a thread pitch of 24.
Check Stock

40 Sets Furniture Board Cam Fitting with Dowel and Pre-Inserted Nut, 3 in 1 Cam Lock Nuts for Cabinet Drawer Dresser and Wardrobe Furniture Panel Connecting (Dowel M6x36mm, Cam Fitting ¢15x13mm)

  • [SPECIFICATIONS] Cam fittings: diameter 15mm (0.59"), height 13mm (0.51"). Connecting rod bolts: total length 36mm (1.41"), thread length 9mm (0.35"), thread diameter 6mm (0.24"). Plastic nuts: diameter 10mm (0.39"), height 9mm (0.35").
  • [MATERIAL] Pre-assembled nuts are made of plastic, cam fittings are made from aluminum alloy, and connecting rod bolts are made from high quality zinc alloy with nickel plated on the surface, they have good corrosion resistance, rust resistance, high hardness and stable structure to ensure long service life..
  • [APPLICATION] The perfect partner for installing furniture, they can make the vertical connection between furniture panels. They can be applied to board wardrobes, shoe cabinets, drawers, cabinets, bed cabinets, etc., especially particle board and particle board..
  • [EASY TO USE] Super easy to install and remove, they save you a lot of time and energy. 1. Knock the plastic pre-insertion nut into a target position on the plate one. 2. Use a cross screwdriver to screw the connecting rod nut into the pre-assembled nut on the plate one. 3. Aligh the hole of plate two with the connecting rod bolt and place it on the plate one, then tighten the cam fitting clockwise to tighten the connecting rod bolt..
Check Stock

Astro Tools 1894 ONYX 1/2''THOR' Impact Wrench

  • The most powerful impact wrench in its class on the market. Even with long impact extensions and universal sockets, the 1894 THOR has the torque to get the job done in a hurry..
  • Rated 940 ft-lbs traditional Max Torque (compare to 1,600+ ft-lbs nut-busting or bolt-breakaway). Patented oversized floating air motor and twin-hammer assembly put the weight over your hand for balance and allow for industry leading power at only 6.7" in length.
  • Includes rocking FWD/REV lever, handle located power adjustment wheel, and two-stage trigger for a power selection without tool adjustment.
  • For use with 3/8" to 1/2" air hoses & 1/4" or 3/8" NPT fittings (adapter for 1/4" included).
  • 4.94lbs, 6.5 CFM continuous use, HI-FLO air fittings recommended on 1/4" & 3/8" fittings!.
Check Stock

Exchilerator Basic - Efficient Wort Chiller for Home Brew Beer - 25% Faster Than Stainless Steel Chiller - Best Counterflow Wort Chiller - Great Home Brewers Gift

  • EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
  • USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the ExChilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photos).
  • COMES READY for you to apply 1/2 Inch National Pipe Thread fittings of your choice..
  • 5 GALLONS 5MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
  • COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.
Check Stock

PHITUODA 10Set Cabinet Furniture Connecting Cam Fitting with Dowel and Pre-Inserted Nut

  • 【Package Included】 10 Sets Furniture Connecting Fittings(10 x Cam Fittings + 10 x Dowels + 10 x Pre-Inserted Nuts).
  • 【Usage】Furniture Connecting Cam Fittings can be used for many types of furniture, cabinet, drawer, dresser and so on..
  • 【Dowels】Male thread diameter: 6 mm/0.23".
  • Length:40 mm/1.57",Made of high quality steel, durable and long-lasting..
  • 【Cam Fitting】12mm x 15mm/ 0.47" x 0.59"(Dia.*H),Made of zinc, strong rust resistance, exquisite workmanship, sturdy and durable..
  • 【Pre-Inserted Nut】6mm x 12mm/0.24" x 0.47"(Inner Dia.*H),made of high quality metal, adopting expansion principle for perfect locking effect..
Check Stock

Kegco Keg Tap Coupler, 1

  • The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
  • This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
  • Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
  • This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
  • Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
Check Stock

Uenede 2PCS Solid Brass Bulkhead Fitting 3/8”Female x 1/2”Male Double Threaded Bulkhead Water Tank Connector

  • 【Solid Brass】The metal parts of bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
  • 【High Quality Thread】The bulkhead fittings are male and female thread, which are applicable models fitting for most items. Please check the size before ordering..
  • 【Double Washers Double Protection】Two washers are respectively padded on both sides of the bulkhead to provide double protection. Better prevent leakage and make you more happy to use your rain bucket or something..
  • 【Easy to Use】First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the water pipe with appropriate size at the end. No doubt, it is easy to operate..
  • 【Widely Used】The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels, suitable for various pipes, faucets, hoses, fittings, multiple uses to provide convenience for your life..
Check Stock

CDQBWKJGFJ 3 Pcs Brass Compression Fitting 3/16 Tube OD x 1/4 OD Union Reducer Connector

  • Three piece construction - nut, sleeve and body.
  • Compression Fittings do not require any flaring, soldering or other type of tubing preparation..
  • Brass for corrosion resistance, high temperature ductility and low magnetic permeability.
  • For copper, brass, aluminum, or plastic tubing.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

4LIFETIMELINES Brake Line Kit – Professional Grade Galvanized Steel Tube 3/16 Brake Line – 25Ft Brake Line Tubing Coil with 16 Fittings

  • FITTINGS INCLUDED: The 4LIFETIMELINES brake line kit was designed for professional use and comes with 16 fittings: Steel Tube Nut 3/16 (3/8-24 I) x 10, Fitting 3/16 (7/16-24) x 2, Steel Tube Nut 3/16 (9/16-18 I) x 2, Fitting 3/16 (1/2-20) x 2..
  • PREMIUM QUALITY & DURABLE: This brake line tubing coil is made with professional grade double-wall galvanized steel tube and zinc coated corrosion-proofing technology, guaranteed to withstand the test of time..
  • ENHANCED FLEXIBILITY: Unlike similar products on the market, this 3/16” brake line meets all SAE and ISO specifications, being highly flexible and allowing for easy bending and shaping without kinking..
  • COMPATIBILITY: The 4LTL professional grade brake line meets SAE J527 international and US standards and requirements, being compatible to use in hydraulic braking systems..
  • EXTRA FEATURES & DIMENSIONS: This brake line tubing coil measures 25ft in length, for a convenient routing and installation. With 0.028” wall thickness, 3/16” OD and universal size, this brake line is a smart and economic replacement!.
Check Stock

(KAS) Double Coil Icemaker Water Fill Valve for Whirlpool Kenmore Refrigerator Icemaker 4318046 WV8046 2188542

  • WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker.
  • This valve comes with all the neccesary hardware to replace your existing valve including a plastic 1/4″ compression union, a 1/4″ plastic compression nut, a 1/4″ brass compression nut, 1/4″ brass compression sleeve, a 1/4″ x 5/16″ plastic compression union, a 5/16″ plastic compression nut, a piece of 5/16″ plastic tubing, a piece of 1/4″ plastic tubing, for retro fitting from garden hose connection, a mounting bracket & screws. It has 1/4″ & 5/16″ compression fittings on inlet & 1/4″ on outle.
  • Detailed installation instructions included..
  • Replacement for numbers 2002182, 4210533, 627403, 627431, 627580, 627859, 627890, 627937, 627963, 628164, 628184, 628185, 628238, 628275, 628295, 819493, 850733, 876070, 2188542, AP3103466 and PS358630..
Check Stock

1/8\ Compression Union Brass Tube Fitting, 1/8\ OD x 1/8\ OD, 5pcs

  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required..
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

MuHize Upgraded Brake Line Tubing Kit - 25 Ft. of 3/16 Copper Coated Flexible Tube, Roll 25 ft 3/16\ (Includes 16 Fittings)

  • PACKAGE INCLUDE - MuHize Brake Line Kit Replacement with 16 Fittings: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • SUPER EASY BENDING & FLARING - MuHize brake lines are easy to be bent with great flexibility by hand and flare by simple tools..
  • HIGHER QUALITY - MuHize brake lines are made with unique surface treatment. The lastest copper-coated brake line is better than standard steel tubing with corrosion resistance..
  • WIDELY APPLICATION - MuHize 3/16 brake line tubing kit commonly fits for Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. We promise that if the line is installed correctly out, the lines will extend the lifespan of the vehicle..
Check Stock

Lug Ripper 21mm Guide (Single unit with the Collar Clamp)

  • 16-PIECE SET: This Orion Motor Tech wheel lock removal kit includes 16 multi-point keys and lugs in the most commonly needed SAE and metric sizes—5/8", 41/64", 45/64", 7/16", 11/16", 13/16", 3/4", 9/16", 1/2", 12 mm, and 15 mm—to remove spline, star, hex, and fluted hex locking lugs nuts with maximum protection and minimal effort.
  • SCRATCH-FREE OPERATION: Our lug nut removal tool set comes with a multi-point thin-walled design to deliver powerful torque to 16 lug nut fittings without damaging your rims.
  • the extra-long keys also help avoid any dents and scratches during use.
  • WIDE APPLICATION: The double-hex heads provide allow this locking lug nut removal tool kit to work with either 13/16 or 7/8 inch lug wrenches.
  • BUILT TO LAST: These lug lock removers are constructed from high-quality chromoly steel, all twice quenched and then blackened to offer you maximum strength and corrosion resistance.
  • EASY ORGANIZATION: Each locking wheel nut key is laser-etched with its specific size for easy identification during use, while the blow-molded storage case keeps organization, transport, and storage between jobs quick and easy.
Check Stock