Categories

Best Nylon Hammer Anchor

Hilitchi 192-Pcs [7-Sizes] Ribbed Plastic Anchors Assortment Kit with Philips Self-Tapping Screws Set for Drywall

  • ...ng a towel hook in the bathroom, hanging up other items or fixing many things around your house. They can be used in concrete, block, brick, and wallboard. Great value and a great asset to have handy for the house projects..
  • ★【HOW TO USE】Drill a hole (depth and diameter in sync with the anchor) with a electric hammer drill, and then insert the anchor through the hole gently. Finally twist the self-tapping screw clockwise with a hammer or screwdriver. Ribs on both side of the anchor serve the function of stabilising anchor tightly in the wall when twisting the screw in. At the same time, the split of anchor would expand to create a snug fit into the wall. So this could provide more holding power..
  • ★【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please come to us, we would reply you within 12hours. We 100% guarantee to solve all the problems to your satisfaction. FREE REPLACEMENT within 90days..
Check Stock

Drive Pins Zinc Alloy - 1/4 X 1-1/2 - Qty 1000

  • Hammer Drive Pins (or just drive pins) attach fixtures to solid concrete or certain types of concrete blocks..
  • Using a predrilled hole, they are installed with hand tools, typically with a hammer strike, to drive the pin into the anchor body expanding the anchor to form a tight fit..
  • The washer on the anchor retains the pin and guides it during the driving installation..
  • Anchor Diameter Equals Hole Diameter-Makes it easy to determine hole size.
  • 304 Stainless steel is durable and rust resistant.
Check Stock

Hilitchi 196-Pcs [11-Sizes] Heavy Duty Drywall Ribbed Anchors Assortment Kit Masonry with Self Tapping Stainless Steel and Galvanized Steel Screws Wall Anchor Set

  • ...good start for an independent life. You must have faith in a new life you are heading towards and also have faith in our products. We believe that your money would be well spent :) if not, contact us anytime. 100% satisfaction..
  • STEPS TO FOLLOWDrill a hole (depth and diameter in sync with the anchor) with a electric hammer drill, and then insert the anchor through the hole gently. Finally twist the self-tapping screw clockwise with a hammer or screwdriver. Ribs on both side of the anchor serve the function of stabilizing anchor tightly in the wall when screwing in. At the same time, the split of anchor would expand to create a snug fit into the wall. So this could provide more holding power..
  • QUALITY AFTER-SALE SERVICEIf you do not satisfy with our products or if you have any questions, please come to us, we would reply you within 12hours. We 100% guarantee to solve all the problems to your satisfaction. FREE REPLACEMENT within 90days..
Check Stock

Uncle Mike's Off-Duty and Concealment ITP Holster (Black, Size 36, Left Hand)

  • Fits 2 inches barrel small frame 5-shot revolvers with hammer spur.
  • Ultra-thin four-layer laminate no thicker than conventional suede leather holsters.
  • Internal moisture barrier won’t transmit perspiration to gun.
  • Suede-like exterior helps anchor holster inside pants or skirt.
Check Stock

P-Set - P38OH 3/8\ Drop-in Anchor Setting Tool

  • Designed, manufactured and patented in the USA.
  • Materials and components sourced from US companies.
  • Hands free anchor setting -- only use the hammer hand (even overhead).
Check Stock

WUTA Leather Carving Hammer Professional Leather Mallet Hammer Leatherworking Maul Nylon Head Hammer for Handmade DIY Leather Tools

  • Leather Mallet Materials: Made of solid wood handle+ high-density nylon hammer+ stainless steel circle. Professional leather carving hammer for leather industry enthusiasts..
  • Mallet Size: Handle Wood Length: 5.51 inch (14 cm), Hammer Nylon length: 2.36 inch (5.99 cm), hammer diameter: 1.96 inch (4.98 cm). Approx.1 Lb/460g..
  • The nylon hammer is ergonomically designed and proportional to the artist/craftsman's best use. Perfect for professionals and hobbyists use for leather stamps, prong diamond chisel, hole punch, etc..
  • Polished to make it smooth and comfortable to touch. It will reduce shock, anti-slip, anti-sweat, etc., reduce fatigue when used for a long time..
  • Worry-free purchase: Nylon hammer is solid enough to use. If you are not satisfied, you can contact us to return anytime..
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

OWDEN Jewelry Metal Stamps Hammer,Steel Hammer,Brass Hammer,Nylon Hammer for Family Craft Working Jewelry Stamping Hammer Leather Tool

  • OWDEN New design 3 in 1 metal stamping hammer, There are 3 material heads design for different craft working. The hammer is wrapped in ABS plastic, And the handle is wrapped in soft plastic to reduce the shock force when struck..
  • The steel head: The steel head part is fixed on the hammer,Chrome plated, And the hardness about HRC48-52. It can meet the use of the family..
  • The brass head: The brass head is screwed on the hammer body by the thread structure. And designed to prevent the unscrew after every hit. the brass head is softer than steel stamps, the brass head will dent when stamping. This is the correct result. In order to prevent the stamp from jumping during use,ghosting of the letters..
  • The nylon head: We cleverly placed the nylon head at the end of the handle,So it is not easy to lose the hammer head! When using, You can unscrew the brass head and replace it with a nylon head. The nylon material has good toughness and durability,It can be used when striking many precision tools to protect the tools intact..
  • This is a multifunctional hammer designed by OWDEN(Patented, Don't copy us) ! You can basically use it in any hand-made process. Both brass head and nylon head will be scrapped with long-times use, So you can find replacement hammer heads in ....
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

2 Pieces Leather Carving Hammer, Leathercraft Mallet, Nylon Wood Handle hammer, Leather Carving Hammer Mallet for DIY Stamping Sew Leather Cowhide Tool(1 T hammer + 1 vertical hammer)

  • Two Leather Carving Hammers: The set contains a vertical hammer and a T hammer. The vertical hammer is 210mm long and weighs 328 grams. The T hammer is 195mm long and weighs 345 grams. Professional leather tools are very suitable for DIY leather craft projects, especially suitable for use with leather stamping tools, stitching punches, punches, etc..
  • Nylon Hammer Head: Both leather carving hammers are made of nylon material, which can better absorb the rebound force when struck, so that the strength is more directly transmitted to the tool. It won’t hurt the tools when hitting with this leather carving hammer, wear-resistant and corrosion-resistant, and will not tire your hands even if you use nylon wood handle hammer for a long time..
  • Wooden Handle: The leather carving hammers adopts a solid wood handle, and the shape design conforms to the most comfortable form of manual work. It is anti-dropping and shock-absorbing, feels comfortable, and has a smooth surface that does not hurt your hands..
  • Stainless Steel Fixing: All the joints of the leather carving hammers use a durable stainless steel structure, and the welding is strong. The tail of the leather carving hammer is fixed with a round convex nut, which is wear-resistant and durable..
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

1036P C.S. OSBORNE 4-1/2\ 7/16\ 12\ NYLON TIP TACK HAMMER

  • 1036P C.S. OSBORNE 4-1/2" 7/16" 12" NYLON TIP TACK HAMMER.
  • 1036P C.S. OSBORNE NYLON TIP TACK HAMMER.
  • C.S. OSBORNE 1036P NYLON TIP TACK HAMMER.
Check Stock

1036P SIZE 14 C.S. OSBORNE 4-1/2\ 1/2\ 12\ NYLON TIP TACK HAMMER

  • 1036P C.S. OSBORNE 4-1/2" 1/2" 12" NYLON TIP TACK HAMMER.
  • 1036P C.S. OSBORNE NYLON TIP TACK HAMMER.
  • C.S. OSBORNE 1036P NYLON TIP TACK HAMMER.
Check Stock