Categories

Best Nylon Hammer Drive Anchor

6 Pack Ground Earth Anchors - Easy Hook Anchor with 30' Long x 1/8' Cable, Ideal for Securing Shed, Fence, Green House, Swing Set and More.

  • ... your life, save your more time and energy..
  • 【1000 Lbs Hold Strength】This 6 piece anchoring system has superior hold strength and will not come out of the ground when installed at full depth (30"), Holding power for each anchor will be up to 1000 lbs when installed at full depth.
  • 【Easy to Use】You will need a hammer and a 0.5inch diameter drive steel tool to drive the anchor into the ground with no holes, no concrete, and no digging required. Remove the drive tool and pull up on the cable to set the toggle. The upward pull rotates the earth anchor into a perpendicular lock position allowing it to firmly secure your item to the ground. Note: drive steel tool is not included..
  • 【Widely Application】This easy hook anchor staking system is a convenient and strong method for secure and prevent the theft or unwanted movement of outdoor items, such as greenhouses, shelters, gazebos, picnic tables, benches, BBQ grills, garbage cans, bicycles, swing sets, fountains, newly planted trees, construction equipment. and more to a variety of surfaces including grass, rocky soil, gravel and asphalt..
  • 【Heavy Duty Material】Earth Anchor works like a toggle bolt in the soil to secure many items to the ground that are prone to theft or being moved. Constructed w....
Check Stock

Nylon Mushroom Head Drive Pin Nail-in Anchor 3/16 x 1-1/2 200 Pieces

  • Nylon mushroom head drive nail-in pin for anchoring and redundant fastening in concrete, block, brick or stone..
  • Anchor Diameter: 3/16". Anchor Length: 1-1/2"..
  • Nail Material: Steel. Anchor Body Material: Nylon..
  • Please see all available products by PHAT SATELLITE INTL.
Check Stock

Hilitchi 24-Pcs [3-Sizes] 35mm 46mm 59mm Long Hollow Wall Drive Anchors Assortment Kit Zinc Plated Steel Heavy Duty Philips Round Headed Molly Bolt Drive for Drywall

  • Nylon mushroom head drive nail-in pin for anchoring and redundant fastening in concrete, block, brick or stone..
  • Anchor Diameter: 3/16". Anchor Length: 1-1/2"..
  • Nail Material: Steel. Anchor Body Material: Nylon..
  • Please see all available products by PHAT SATELLITE INTL.
Check Stock

Nylon Gun Holster for Smith and Wesson M&P Shield

  • Fits 2 inches barrel small frame 5-shot revolvers with hammer spur.
  • Ultra-thin four-layer laminate no thicker than conventional suede leather holsters.
  • Internal moisture barrier won't transmit perspiration to gun.
  • Suede-like exterior helps anchor holster inside pants or skirt.
  • Ultra-thin, four-layer laminate no thicker than conventional swede leather holsters.
  • Belt clip slips over pant top and belt to hold gun securely and anchor gun for positive draw.
Check Stock

CONFAST 1/4 x 3 Split Drive Flat Zinc Plated 100 per Box

  • TAMPERPROOF-Anchor cannot be removed to provide security for item being attached.
  • ZINC PLATED-Provides rust resistance for dry applications.
  • FOR CONCRETE ONLY-Fast, easy and strong fastening into solid concrete.
  • NO SPECIAL TOOLS NEEDED-Drill the hole drive with a hammer.
Check Stock

CONFAST 1/4 x 2 Split Drive Flat Zinc Plated 100 per Box

  • TAMPERPROOF-Anchor cannot be removed to provide security for item being attached.
  • ZINC PLATED-Provides rust resistance for dry applications.
  • FOR CONCRETE ONLY-Fast, easy and strong fastening into solid concrete.
  • NO SPECIAL TOOLS NEEDED-Drill the hole drive with a hammer.
Check Stock

Hilitchi 192-Pcs [7-Sizes] Ribbed Plastic Anchors Assortment Kit with Philips Self-Tapping Screws Set for Drywall

  • ...ng a towel hook in the bathroom, hanging up other items or fixing many things around your house. They can be used in concrete, block, brick, and wallboard. Great value and a great asset to have handy for the house projects..
  • ★【HOW TO USE】Drill a hole (depth and diameter in sync with the anchor) with a electric hammer drill, and then insert the anchor through the hole gently. Finally twist the self-tapping screw clockwise with a hammer or screwdriver. Ribs on both side of the anchor serve the function of stabilising anchor tightly in the wall when twisting the screw in. At the same time, the split of anchor would expand to create a snug fit into the wall. So this could provide more holding power..
  • ★【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please come to us, we would reply you within 12hours. We 100% guarantee to solve all the problems to your satisfaction. FREE REPLACEMENT within 90days..
Check Stock

2000pcs 1/4 x3/4 Hammer Drive Anchor Zinc Alloy with Zinc Plated Steel Nails inch Size 1/4 Length 3/4

  • HAMMER DRIVE ANCHOR, ZINC ALLOY WITH ZINC PLATED STEEL NAILS (INCH).
Check Stock

Hilitchi 196-Pcs [11-Sizes] Heavy Duty Drywall Ribbed Anchors Assortment Kit Masonry with Self Tapping Stainless Steel and Galvanized Steel Screws Wall Anchor Set

  • ...good start for an independent life. You must have faith in a new life you are heading towards and also have faith in our products. We believe that your money would be well spent :) if not, contact us anytime. 100% satisfaction..
  • STEPS TO FOLLOWDrill a hole (depth and diameter in sync with the anchor) with a electric hammer drill, and then insert the anchor through the hole gently. Finally twist the self-tapping screw clockwise with a hammer or screwdriver. Ribs on both side of the anchor serve the function of stabilizing anchor tightly in the wall when screwing in. At the same time, the split of anchor would expand to create a snug fit into the wall. So this could provide more holding power..
  • QUALITY AFTER-SALE SERVICEIf you do not satisfy with our products or if you have any questions, please come to us, we would reply you within 12hours. We 100% guarantee to solve all the problems to your satisfaction. FREE REPLACEMENT within 90days..
Check Stock

Hard-to-Find Fastener 014973285432 Nylon Mushroom Nail Drive Anchors, 1/4 x 3/4, Piece-100

  • TAMPERPROOF-Anchor cannot be removed to provide security for item being attached.
  • ZINC PLATED-Provides rust resistance for dry applications.
  • FOR CONCRETE ONLY-Fast, easy and strong fastening into solid concrete.
  • NO SPECIAL TOOLS NEEDED-Drill the hole drive with a hammer.
Check Stock

Wej-It Nail-It DN1412 Drive Anchor Zamac Alloy Zinc Plated Finish Meets GSA FFS-325 Group V Type 2 Class 2 Specifications 1/4 Diameter 1-1/2 Length Pack Of 100

  • Drive anchor provides a secure hold in concrete, block, brick, and stone.
  • Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer (sold separately) to expand and grip the mounting material.
  • Meets Fed. Spec. GSA FFS-325 Group V, Type 2, Class 2 specifications.
  • Ultimate tensile strength for a static load is 800 lb. in 3,000-psi unreinforced stone aggregate concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

100 Pcs 1/4 x 3 Heavy Duty Nail Drive Anchors Rustproof Drive Pins Zinc Plated Drive Anchors for Metal Steel Aluminum Angles Wood Concrete Hammer Fasteners Kit

  • A Box of 100: there are 100 pcs of 1/4" x 3" drive nail anchors in the package, plenty enough to use and replace to easily meet your daily and party needs.
  • Size Information: with a size of approximately 1/4" in diameter and 3" in length, this heavy duty nail drive anchor requires drilling a 1/4" diameter hole in concrete prior to installation.
  • Please confirm the size before placing an order.
  • Strong and Reliable: featuring zinc plated steel material, heavy duty drive nail in anchors are strong and reliable, not easy to break, deform, bend or rust, easy to serve you for a long time.
  • Practicality: these zinc plated nail drive anchors can fasten sheet metal, steel, aluminum angles, wood, etc., to concrete, ideal for structural anchoring, shelf anchoring, mechanical and handrail installations.
  • Easy to Install: 1/4 x 3" drive anchors are simple to apply, hit them into the reserved hole with a hammer, and they can be easily installed without additional tools, saving time and effort.
  • Note: anchors cannot be taken out after use, please confirm the insertion point before use.
Check Stock

Uncle Mike's Off-Duty and Concealment ITP Holster (Black, Size 36, Left Hand)

  • Fits 2 inches barrel small frame 5-shot revolvers with hammer spur.
  • Ultra-thin four-layer laminate no thicker than conventional suede leather holsters.
  • Internal moisture barrier won’t transmit perspiration to gun.
  • Suede-like exterior helps anchor holster inside pants or skirt.
Check Stock