Categories

Best Nylon Insert Lock Nut

Prime-Line 9074800 Nylon Insert Lock Nuts, #4-40, Grade 2 Zinc Plated Steel, (50-pack)

  • Nut Type: Hex Locknut with Blue Nylon Insert.
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
  • Made of 304 stainless steel (no coating outside), provides good strength and corrosion resistance in bad environments..
Check Stock

VIGRUE 315Pcs Metric 304 Stainless Steel Hex Nuts Assortment Kit for Screw Bolt (M2 M2.5 M3 M4 M5 M6 M8)

  • Type: Stainless Steel Nylon Insert Lock Nut & Washer Assortment Kit..
  • Thread Size: #8-32 #10-24 1/4"-20 5/16"-18 3/8"-16 1/2"-13 Nylon Lock Nuts | UNC Coarse Thread.
  • All lock nuts and washers are made of stainless steel 304, provides good strength and corrosion resistance in bad environments..
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
  • Warranty: Customers enjoy lifetime service for product quality problem, if you have any concerns, please contact us for a happy solution..
Check Stock

Kuryakyn 7657 Motorcycle Accessory: Receiver Hitch with 1-7/8\ Diameter Trailer Hitch Ball for 2014-19 Harley-Davidson Touring Motorcycles, Black/Chrome

  • ... on both sides for optimum structural support.
  • This Black and Chrome Receiver Hitch for Touring Models remains hidden when ball mount is not installed and is the most simplistic bolt-on installation using simple hand tools.
  • Includes (1) Left Side Strut Hardware Kit - CONTINUED: (1) Right Side Strut, (3) 5/16-24 Nylon Insert Locking Nut, (1) Left Side Drawbar, (2) 3/8-24 Nylon Insert Locking Nut, (1) Right Side Drawbar, (2) 1/4-20 X 0.5 Hex Head Cap Screw, (1) Hardware Kit, containing: (1) 5/16-24 X 1.5 Full Thread, Hex Head Cap Screw, (2) Black Spacer .36, (2) Pin, 5/16 X 1.5, (2) Black Spacer .71, (2) 5/16 Lock Washer, (4) 5/16-18X1.75 Black Button Head Cap Screw, (6) 5/16 Flat Washer, (4) 5/16 Black Flat Washer, (2) 3/8 Split Lock Washer, (4) 5/16 Black Split Lock Washer, (2) 3/8 Flat Washer, (2) 5/16-24 X 1.5 Hex Head Cap Screw, (1) 1-7/8” Hitch Ball, (2) 3/8-24 x 2.75 Hex Head Cap Screw, (1) 3/4 Split Lock Washer, (1) 3/4-16 Hex Nut.
  • suggested tools for smooth installation: Combination Wrench Set, Torx Wrench Set, Hex Wrench Set, Torque wrench.
  • This Kuryakyn part is most compatible with Harley: '14-'19 Electra Glides, Road Glides (except '19 FLTRXSE), Road Kings & Street Glides (except '15-'19 FLHXSE).
  • Will not fit with accessory Saddlebag Guard R....
Check Stock

Universal Headboard or Footboard Hardware, 304 Stainless Steel Nuts and Bolts 3 inches, Bed Frame Bolts, Headboard Bolts, Bolts for headboard to Frame, Headboard & Footboard

  • Use this 304 Stainless Steel hardware set to easily attach your bed frame to a headboard or footboard..
  • Usage: Nylon Lock Nuts Use the matching screws and wrench to internal hex tool to screw in..
  • Package Include: 8pcs-3 inches bolts, 8pcs-Lock nuts, 8 spring washers, 8 washers, 1pc Allen key, 1pc- open wrench.
  • Nylon Insert Lock Nuts are also known as stop nuts. Lock nuts are used for fastening to a bolt when mechanically joining materials together. The bolt threads into the nylon material are located at the top of the nut. The purpose of the nylon insert is to prevent backing off or loosening from vibration..
  • Highly resistant against turning, preventing the lock nuts from weakening and loosening under vibration and torque which reduces the strength of hold. Guaranteed to stay intact and in firm hold making virtually indestructible..
Check Stock

M8-1.25 Serrated Flange Nylon Insert Lock Nuts Flanged Locknuts, 304 Stainless Steel 18-8, Bright Finish, 10 PCS

  • Features an internal nylon ring that grips bolt threads better than a standard finished nut.
  • Great for use in applications where the bolt may be subject to vibration.
  • Can also be used as a secondary nut to help lock the main nut in place.
  • The side with the nylon insert should face towards the tip of the bolt, not towards the surface being fastened.
  • Thread Type: Coarse, Thread Class: UNC-2B.
Check Stock

Persberg 132pcs 304 Stainless Steel Hex Nuts Assortment kit, for Screws Bolts, Multiple Sizes M3 M4 M5 M6 M8, Deluxe Hardware Assorted Hex Nuts P120-148

  • √ Size: M3 M4 M5 M6 M8 M10 M12 total 180pcs in a box, meet your different needs. Allocating more quantity for the commonly used lock nuts..
  • √ Material: 304 Stainless Steel, strong and corrosion resistant, prevent bolts from being exposed and coming out providing better security and firm hold. Performs better compared to lock washers as it is made out of non-corrosive material..
  • √ Highly resistant against turning, preventing the lock nuts from weakening and loosening under vibration and torque which reduces the strength of hold. Guaranteed to stay intact and in firm hold making virtually indestructible..
  • √ Top Grade 304 stainless steel nylon lock nuts in 7 common sizes for general, convenient, and handy use making it highly ideal for use professionals and DIYers. This kit is one of the few in the market with high-quality and better quantity making it a cost-efficient choice..
  • √ Nylon Insert Lock Nuts are also known as stop nuts. Lock nuts are used for fastening to a bolt when mechanically joining materials together. The bolt threads into the nylon material are located at the top of the nut. The purpose of the nylon insert is to prevent backing off or loosening from vibration..
Check Stock

Stainless Steel Thin Jam Nylon Insert Lock Nuts 1/4-28 (pack of 25) Marine Bolt Supply

  • 20 Pack, 3/4-10, Coarse Thread, Zinc Plated Steel, Nylon Insert Lock Nut..
Check Stock

NEW 55-57 CHEVY FACTORY REPLACEMENT CLUTCH PEDAL CROSS SHAFT BOLT AND BUSHING KIT PUSH ROD TRI-5 1955 1956 1957 150 210 BEL AIR NOMAD SEDAN DELIVERY DEL RAY

  • Brand New Southwest Speed Factory Replacement Clutch Pedal Cross Shaft Bolt and Bushing Kit that fits 1955-1957 Tri-Five Chevy's with Manual....
  • This Southwest Speed clutch pedal cross shaft bolt and bushing kit are a reproduction of the original clutch pedal push rod bolt and bushing used on....
  • This kit includes a steel shoulder bolt, two delrin bushings, 3 flat washers, and an nylon locking nut > The shoulder bolt and bushings will look,....
  • Features: > Steel shoulder bolt with black oxide finish > Factory reproduction > Corrosion-resistant lock nut with nylon insert > Required for....
  • Applications: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1957 Chevy Del Ray > 1955-1957 Chevy Nomad > 1955-1957 Chevy....
Check Stock

uxcell Brass Tubing Nut Tube Fitting Compression Insert Hydraulic Nuts M10x6mm 8pcs

  • The ferrule joint has the characteristics of firm connection, high pressure resistance, good sealing and repeatability, convenient installation and maintenance, and safe and reliable work..
  • It is to insert steel/copper/aluminum tube/nylon tube into the ferrule, lock with ferrule nut, resist the ferrule, cut into the tube and seal..
  • It does not need to be welded when connecting with steel pipes, which is beneficial to fireproof, explosion-proof and high-altitude operations, and can remove the disadvantages caused by inadvertent welding..
  • It is a relatively advanced connecting piece in the pipeline of automatic control systems such as machine tools, oil circuits, oil pumps, oil refining, chemical, petroleum, food, instrumentation and so on..
Check Stock

uxcell Brass Tubing Nut Tube Fitting Compression Insert Hydraulic Nuts M10x6mm 16pcs

  • The ferrule joint has the characteristics of firm connection, high pressure resistance, good sealing and repeatability, convenient installation and maintenance, and safe and reliable work..
  • It is to insert steel/copper/aluminum tube/nylon tube into the ferrule, lock with ferrule nut, resist the ferrule, cut into the tube and seal..
  • It does not need to be welded when connecting with steel pipes, which is beneficial to fireproof, explosion-proof and high-altitude operations, and can remove the disadvantages caused by inadvertent welding..
  • It is a relatively advanced connecting piece in the pipeline of automatic control systems such as machine tools, oil circuits, oil pumps, oil refining, chemical, petroleum, food, instrumentation and so on..
Check Stock

uxcell Brass Tubing Nut Tube Fitting Compression Insert Hydraulic Nuts M10x4mm 2pcs

  • The ferrule joint has the characteristics of firm connection, high pressure resistance, good sealing and repeatability, convenient installation and maintenance, and safe and reliable work..
  • It is to insert steel/copper/aluminum tube/nylon tube into the ferrule, lock with ferrule nut, resist the ferrule, cut into the tube and seal..
  • It does not need to be welded when connecting with steel pipes, which is beneficial to fireproof, explosion-proof and high-altitude operations, and can remove the disadvantages caused by inadvertent welding..
  • It is a relatively advanced connecting piece in the pipeline of automatic control systems such as machine tools, oil circuits, oil pumps, oil refining, chemical, petroleum, food, instrumentation and so on..
Check Stock

uxcell Brass Tubing Nut Tube Fitting Compression Insert Hydraulic Nuts M10x6mm 2pcs

  • The ferrule joint has the characteristics of firm connection, high pressure resistance, good sealing and repeatability, convenient installation and maintenance, and safe and reliable work..
  • It is to insert steel/copper/aluminum tube/nylon tube into the ferrule, lock with ferrule nut, resist the ferrule, cut into the tube and seal..
  • It does not need to be welded when connecting with steel pipes, which is beneficial to fireproof, explosion-proof and high-altitude operations, and can remove the disadvantages caused by inadvertent welding..
  • It is a relatively advanced connecting piece in the pipeline of automatic control systems such as machine tools, oil circuits, oil pumps, oil refining, chemical, petroleum, food, instrumentation and so on..
Check Stock

uxcell Brass Tubing Nut Tube Fitting Compression Insert Hydraulic Nuts M10x4mm 8pcs

  • The ferrule joint has the characteristics of firm connection, high pressure resistance, good sealing and repeatability, convenient installation and maintenance, and safe and reliable work..
  • It is to insert steel/copper/aluminum tube/nylon tube into the ferrule, lock with ferrule nut, resist the ferrule, cut into the tube and seal..
  • It does not need to be welded when connecting with steel pipes, which is beneficial to fireproof, explosion-proof and high-altitude operations, and can remove the disadvantages caused by inadvertent welding..
  • It is a relatively advanced connecting piece in the pipeline of automatic control systems such as machine tools, oil circuits, oil pumps, oil refining, chemical, petroleum, food, instrumentation and so on..
Check Stock