Categories

Best Nylon Locknut

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check Stock

Mueller Industries 109-814 Float Valves, 0.75 Inch

  • Dual inlet thread for connecting pipe and locknut.
  • Machined flange for support against tank wall.
  • Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves.
Check Stock

Prime-Line 9074800 Nylon Insert Lock Nuts, #4-40, Grade 2 Zinc Plated Steel, (50-pack)

  • Nut Type: Hex Locknut with Blue Nylon Insert.
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
  • Made of 304 stainless steel (no coating outside), provides good strength and corrosion resistance in bad environments..
Check Stock

OTC 1909 3-1/4" 8-Point Octagon Locknut Wrench

  • 3-1/4 inch 8-point octagon locknut wrench.
  • High strength steel resists rounding out.
  • For use with 3/4 inch square-drive manual tools only.
  • Measure from flat to flat to determine size of locknut.
Check Stock

Milliontronic Stainless Steel 304 Nylon Insert Locknut, Metric (M5 (100Pcs))

  • Material Grade: AISI 304 Stainless Steel (18-8).
Check Stock

Little Giant PDFE Dura Fork, Red

  • Aluminum handle pre-bent at an ergonomic to help reduce back strain..
  • Designed for long lasting use around the farm, ranch and home.
  • Specially designed tines are uniquely angled to provide easy manure pickup with less spilling.
  • Manufactured from extra strong polycarbonate to provide strength and enhanced flexibility.
Check Stock

Lamson E943E-CAR Carlon Male Adapter

  • Material: Nylon material, resist sea water, gasoline, alcohol ,grease and so on..
  • Performance: Flammability classification 94V-2.
  • Installation: Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • Application: Suitable for indoor/outdoor usage.
Check Stock

KiWAV Tappet Valve Adjustment Wrench Tool Set Timing Chrome Vanadium Steel

  • The hand tool allows micro adjustment without disturbing the locknut which can be tightened when the correct clearance is achieved..
  • Use a 12mm wrench to hold the locknut socket while using square type driver to loosen or tighten the valve adjustment screw..
  • 8, 9mm locknut sockets and 3mm square type driver included..
  • Fits most motorcycles and ATVs with screw-type tappet adjustments..
Check Stock

NOVINO 14-1/2Dia X 19Pitch Boat Outboard Propeller for Mercruiser Alpha One Prop/Mercury Engine 135 150 175 200 220 225 250 300HP,3-Blade Aluminum 14.5dia x 19 Pitch Propeller,Replace OEM#48-832830A45

  • ... pitch Mercury/Mercruiser propeller,lower fuel consumption and great speed acceleration or rmps,,reduce the wear and tear on engine.
  • Easy Install: The propeller with hub kit Includes Flo-Torque hub kit (hub, splined hub, thrust washer, prop nut and keeper),Just remove prop locknut&locknut retainer& forward thrust washer.Then Install forward thrust washer---Insert drive sleeve into prop---Slide prop on prop shaft---Insert drive sleeve adapter--Slide locknut retainer---Install prop locknut---Insert sth to prevent spinning--Tighten prop locknut.
  • Fitment:perfect propeller replacement for 14.5x19pitch Mercury Engines 135 150 175 200 220 225 250 300HP&Mercruiser Alpha One Bravo One,detail information pls see below.
Check Stock

1 Inch 90 Degree Nonmetallic Liquid Tight Electrical Conduit Conector Fitting, 4 Pack, UL Listed

  • Material: Nylon material, resist sea water, gasoline, alcohol ,grease and so on..
  • Performance: Flammability classification 94V-2.
  • Installation: Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • Application: Suitable for indoor/outdoor usage.
Check Stock

DERNORD 240V 6500W Ripple Water Heater Element Screw-In Lime Life - Ultra Low Watt Density

  • Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm.
  • Low Watt Density Stainless Steel Immersion Ripple Foldback heating element provides 6500w 240v of power.
  • The shape is to minimize length and maximize heated surfaces.
  • Resists dry firing, lime deposits, and sand that would burn out ordinary elements.
Check Stock

Dernord 240V 5500W Ripple Water Heater Element Screw-In Lime Life - Ultra Low Watt Density

  • Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm.
  • Low Watt Density Stainless Steel Immersion Ripple Foldback heating element provides 5500w 240v of power.
  • The shape is to minimize length and maximize heated surfaces.
  • Resists dry firing, lime deposits, and sand that would burn out ordinary elements.
Check Stock

DERNORD Heating Element U Type Electrical Brewing Water Boiler Heater 1-1/2 Inch NPT Male Flange (208V 3000W)

  • SUS304 Tri-clamp U Type heating element provides 3000w 208v of power.
  • Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm.
  • With SUS304 Materials Cap,easy to Install.
  • Prevent dry firing, lime deposits, and sand that would burn out ordinary elements.
Check Stock