Categories

Best Nylon Threaded Rods And Nuts

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

  • 【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
  • 【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
  • The fully threaded rods & studs can be drilled, cut, heated and shaped.
  • 【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
  • 【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.
Check Stock

8 Pack 1/4-20 X 7/8\ Long Hex Coupling Nut with Zinc Plate NCUP004C000STLZN

  • Coupling nuts are threaded fasteners for joining two male threads, most commonly threaded rod.
  • Coupling Nuts are used to make up long rod assemblies from shorter lengths of rods.
  • Country of Origin: Taiwan, Province Of China.
Check Stock

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

  • What You Will Get: the package comes with 6 pieces of 8/32 inch M4 12 inch threaded rods and 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
  • Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
  • Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
  • Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
  • Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.
Check Stock

uxcell M6 x 250mm Fully Threaded Rod, 304 Stainless Steel, Right Hand Threads

  • Fully threaded rods are widely applied in many occasions..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
Check Stock

5pcs M8 x 1.25 x 35mm Stainless steel Long Coupling Hex Nut Connector

  • 1/4-28 X 7/8" long, fine threads, 3/8" across the flats steel coupling nut with zinc finish.
  • Coupling nuts are threaded fasteners for joining two male threads, most commonly threaded rod.
  • Zinc plate over steel - more rust resistant.
  • Coupling Nuts are used to make up long rod assemblies from shorter lengths of rods.
Check Stock

Masmoc 10Pack M8 x 80mm Fully Threaded Rod Stud 304 Stainless Steel Threaded Screw Right Hand Threads M8-1.25 Thread Pitch with 20PCS Hex Nuts and 20pcs Washers

  • Package :M8 x 80mm right hand full threaded rod 10PCS, M8 hex nuts 20PCS, M8 washer 20PCS..
  • Thread rod Dia.: M8, Thread Pitch: 1.25mm,total length: 80mm made of 304 stainless steel, provides great corrosion resistance and anti-rust ability for long service life, thread direction: right-hand thread..
  • These threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • These threaded studs can be drilled, cut, heated and shaped and widely applied in many occasions: anchor bolts, clamps, hangers and U-bolts and many more projects..
Check Stock

The Hillman Group 180210 Coupling Nut 1/4 - 20 50-Pack

  • Threaded fasteners for joining two male threads, most commonly threaded rod.
  • Used to make up long rod assemblies from shorter lengths of rods.
  • Similar to hex nuts with extreme height measurements giving them length.
  • Use with fasteners of the same threading and finish.
Check Stock

BOOSTEADY Gun Cleaning Kit Universal Gun Cleaning Kit Shotgun Pistol Rifle Cleaning Kit with Lightweight Organized Carrying Case Gun Cleaning Supplies Gun Cleaner Bottle Plastic Jags and Tips

  • ...ing accessories. This kit is portable and lightweight. We have stored some consumable spare parts in our United States warehouse to ensure solving your problem fast.
  • One fits all: 3 rods for 22-270 caliber rifles (total combined length 31.4 inch), 3 rods for .30 caliber and up rifles, shotguns and pistols. 13 Pieces threaded bronze bore brushes all calibers: .17 .22 .243 .270 .30/7.62MM .338 .357/9MM .40 .45 .50 .410 12GA 20GA.
  • Quality solid material: The gun cleaning rods are made of brass. The gun cleaning jags and patch loops are made of nylon plastic that tougher than normal plastic. You will be surprised with the durability of them.
  • Package details: 13 threaded bronze bore brushes, 1 rifle chamber brush, 9 threaded cotton mops, 11 gun jags（10 plastic 1 brass), 4 patch holders （3 plastic 1 brass), 2 empty bottles, 6 solid brass rods (2 with handles), 3 nylon coated flex cables, 100 cleaning patches, 2 metal gun cleaning picks, 2 brass adapter, 3 plastic muzzle guards, 2 double-ends brushes.
Check Stock

VIGRUE 450pcs M3 M4 M5 M6 M8 Acorn Hex Cap Nuts and Nylon Lock Nut and Serrated Flange Hex Lock Nuts Assortment Kit, 304 Stainless Steel, Bright Finish

  • ...ly: Nylon Lock Nut with a nylon insert inside, the lock nuts greatly reduce loosening vibrations and torque. Flange Nut serves to distribute the pressure of the Nut over the part being secured, reducing the chance of damage to the part. The Acorn cap nut is a hex with an enclosed dome and it is partially internally threaded, can play a good role in decoration and to prevent being threaded scrape..
  • ✅High-Quality Stainless Steel: These Nuts Assortment Kit are quality 304 stainless steel which is high hardness and high strength, which provides excellent rust resistance, will not be damaged under high pressure, and can be used for a long time. Through heat treatment and strict quality control, the surface of our nuts is smooth and bright..
  • ✅Transparent Storage Box: Acorn Hex Cap Nuts, Nylon Lock Nut, Flange Hex Lock Nuts assortment kit come with a convenient storage case, which is transparent and many compartments included, easy for your store and carry. And every size, neatly lies in a compartment individually..
  • ✅WORRY-FREE: VIGRUE provide service for our product quality problem, if you're unhappy with our product for any reason, please feel free to contact us, we will solve the problem. NO HASSLE LIFETIME SERVICE If you need a single size or differe....
Check Stock

Raiseek Gun Cleaning Kit Universal Gun Cleaning Kit Shotgun Pistol Rifle Cleaning Kit Gun Cleaning Patches Updated Rods with Case Plastic Jags and Tips

  • ...easily broken brass rods, we improve the material of the rods. It makes your cleaning process more smooth and enjoyable without being interrupted..
  • Universal gun cleaning supplies-3 rods for 22-270 caliber rifles (total combined length 31.4 inch), 3 rods for .30 caliber and up rifles, shotguns and pistols. 13 Pieces threaded bronze bore brushes.
  • The well-organized carrying case measured 15.7x10.2x2.3 inch features with caliber size engraved into slot and easy open sliding buckle. Portable and lightweight. It keeps everything in neat order and marked size for easy findings. .357 .380 and 9mm are essentially the same size. Package includes .357 jag and brushes. You can use .357 jag and brushes to clean .357 .380 and 9mm..
  • Package includes: 13 threaded bronze bore brushes, 1 rifle chamber brush, 9 threaded mops, 11 gun jags（10 plastic 1 brass), 4 patch holders （3 plastic 1 brass), 2 empty bottles, 6 solid iron rods (2 with handles), 3 nylon coated flex cables, 100 cleaning patches, 2 metal gun cleaning picks, 2 brass adapter, 3 plastic muzzle guards, 2 double-ends brushes..
Check Stock

6 PCs Fishing Rod Holder Racks - Portable Fishing Pole Stand-Off Tube Rod Pole Holders Fish Bracket Support

  • ✔️【High Quality】: Fishing Pole Racks Holders are made of Environmentally Friendly ABS construction, durable and lightweight for freshwater and saltwater to hold your rods,pole, or storage Net etc.
  • ✔️【Fit Most Fishing Rods】: This fishing pole rack support holders is About 10.63 x 2.37 in (27cm x 6.03 cm), Single slotted holder designed to lock-in most fishing rods and poles.
  • ✔️【Come with Screw and Nuts】: 6 PCs x Fishing Rod Holders with 12 x Nuts & 24 x Screws for easy mounting on the deck of your boat ship or Yacht and also truck, cooler, wall, barrel,milk crate,golf cart.
  • ✔️【Useful Fishing Holders】: This kayak boat Fishing rod holders ends the tedious task of holding the rod for long time, free your hands and let you enjoy your kayak boat fishing time.
  • ✔️【Installation Nuts】: Come with the install Screw and Nuts, the Nuts are the lock-nut design, the inside is the nylon ring damping in it, which can Prevent the screw Loosening so that can hold the rods stable.
Check Stock

Smartsails M8 x 200mm，304 Stainless Steel Full Threaded Rod, Right Hand Thread (4 Pieces)

  • ▼ Size Name:M8*200 mm Material : 304 stainless steel.
  • ▼ 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
  • ▼ Fully threaded rods are widely applied in many occasions..
  • ▼ Used for assembly fastening, screw into threaded nuts or tapped holes..
Check Stock

uxcell 5Pcs M3 x 300mm Fully Threaded Rod 304 Stainless Steel Right Hand Threads

  • 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
  • Fully threaded rods are widely applied in many occasions.Note: the two ends of the stainless steel shaft are slightly deformed due to the cutting process and are not completely round. you can polish it before use..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
Check Stock