Categories

Best Oil Absorption Filters

Outlaw Racing ORF136 Performance Oil Filter Compatible with Suzuki Motorcycles DR-Z250 TU250X Replaces KN136

  • ✅ Outlaw Racing's performance oil filters are designed to meet or exceed OEM oil filters specs while offering longer life with comparable filters.
  • ✅ Oil filters have a performance efficiency rate of 99% @ 20 Microns for removing damaging contaminants, while still offering outstanding high flow rate filtration even during high-performance conditions.
  • ✅ Manufactured with a sealing O-ring and constructed with Synthetic Blend Media material with M-Pleat element design..
  • ✅ May be used with conventional and synthetic oils. All Oil Filters come with a 1 year limited warranty..
Check Stock

Mamiko 04152-YZZA1 Oil Filter Kit (3Pcs) and 90430-12031 Oil Drain Plug Gaskets (10 Pcs) Compatible with Toyota Avalon Camry RAV4 Sienna Lexus ES300h ES350 IS200t RX350 RX450h Replacement

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

Air Vent Filters 1 Pack of 12 - 4

  • AIR VENT FILTERS FOR AC UNITS AND HEATERS Insert these air vent filters into the floor air vent registers to purify the air coming from your AC units and heaters. Designed to filter the air you breathe.
  • these air vent filters also prevent dirt and other objects from falling into the air vents.
  • ELECTROSTATICALLY CHARGED AIR RETURN FILTER Made from self-charging electrostatic material, our vent filters act as a dust, dirt, pollen and smoke magnet for your vent registers so you dont have unwanted particles in the air you are breathing. This purifying process allows you to experience fresher, filtered air in your home.
  • VENT FILTERS FOR SELECtED ROOMS IN THE HOME We recommend using these heater vent filters in selected rooms around your home, so as not to put too much stress on your AC and heating systems. Please note that these AC vent filters are not intended to replace your AC or furnace filters. Using any brand vent filter will cause slight airflow restriction..
  • ESSENTIAL OIL DIFFUSING ACTION Unique to our air vent filters is the option to use them as essential oil diffusers. Simply drop a few drops of your favorite essential oil onto the air filter to fill the room with the scent for a calming and relaxing atmosphere. We recommend that these AC....
Check Stock

Oil Filters, 2Pcs Engine Automotive Oil Filter Replacement Changes for Most Generators Diesel Mini Tiller

  • Premium Material: Oil filters is made of high quality ABS plastic, these engine oil filters are sturdy.
  • High Quality: There are total 2 pieces of oil filters in this set.
  • Good Compatibility: 2Pcs engine oil filters are convenient and easy to use, great parts to replace your broken or old ones.
  • Wide Application: Fit for most air-cooled diesel mini-tiller engine and most generators.
  • Compact Size: The automotive replacement has small size and lightweight, they are easy to carry or storage.
Check Stock

Motivx Tools Oil Filter Wrench for Toyota Camry, Tundra, Tacoma, 4Runner, RAV4 and More - 64mm 14 Flute Precision CNC Machined Aluminum Oil Filter Removal Tool

  • COMPATIBLE WITH ALL TOYOTA CARTRIDGE STYLE OIL FILTERS - The Motivx Tools 64.3mm 14 flute oil filter wrench is compatible with all Toyota and Lexus cartridge style oil filter caps from 1.8L - 5.7L engines. This includes popular models like Camry, Tundra, Tacoma, 4Runner, RAV4, Corolla, Highlander, Prius and more that use a cartridge style filter where you remove a plastic cap to expose the paper filter element inside..
  • WILL NOT BREAK TABS ON FILTER - This patent pending second generation filter removal tool features a “notch-less” design which securely grips the fluted plastic portion of the oil filter cap without engaging the tabs like older wrench designs. This prevents the tabs from cracking or breaking off which can lead to serious oil leaks..
  • FITS A WIDE RANGE OF FILTERS - Outdated filter wrenches have limited fitment and only work with filters for either 1.8L or 2.5-5.7L engines. The Motivx Tools MX2320-US wrench works with all Toyota cartridge style filters and is compatible with Toyota spin-on style oil filters 90915-YZZF1, 90915-YZZN1, 90915-10009, and 90118-WBA40. Also works with select 14 flute spin-on filters from Honda, Bosch, Mobil 1, Purolator and Hiflofiltero..
  • MADE IN USA - This oil filter wrench is proudly made in the USA....
Check Stock

Connaisseur Rockline Basket Coffee Filters 8-12 Cup Basket 700 Filters - = 1400 Filters by Connaisseur

  • Connaisseur Coffee Filters, Well Known Brand since 1983.
  • Fits : Mr Coffee, Proctor-Silex, Black And Decker, and other coffee makers requiring 8-12 cup basket fillers.
  • Please keep your paper filters in a container away from heavy odors. This will prevent odor absorption by the paper which could give the coffee unusual taste.
Check Stock

2Pcs Universal 12 Inch Oil Filter Pliers 2-1/2 to 4-1/2 Inch and Adjustable 3 Jaw Oil Filter Wrench 2-1/8 to 4-1/2 Oil Filter Change Removal Tool Set

  • Package Include - The oil filter wrench set includes a 12 inch long handle grip pliers, and an adjustable 3 jaw 2 way oil filter wrench removal tool for install oil filters and remove..
  • Oil Filter Plier - The long handles plier has a 12 inch long handle, the max jaw open is about 2-1/2 to 4-1/2 inch(63.5 to 115mm), with right angle teeth for grip and a 3-position slip joint design for quickly adjusts to size. Good for almost all of your family vehicles..
  • 3-Jaw 2-Way Oil Filter Wrench - This adjustable oil filter removal tool manufactured from durable carbon steel and is made specifically to be used to remove oil filters ranging from 2-1/8 inch to 4-1/2 inch (54-116mm).
  • The wrench Set are made of hardened steel, high hardness and strength. After drop forged, heat treated steel with rust-resistant finish, durable enough for long time service..
  • Universal Tool - This oil filter wrench remover tool set would help you do the job easily. Recommended for most common size car and stuck engine oil filters. As long as the filter is not too small, it will remove most filters..
Check Stock

Outlaw Racing ORF143 Performance Oil Filter Compatible with Yamaha YFM225 Moto-4 TW200 Replaces KN143

  • Designed to meet or exceed OEM oil filters specs while offering longer life with comparable filters..
  • Oil filters have a performance efficiency rate of 99% @ 20 Microns for removing damaging contaminants, while still offering outstanding high flow rate filtration even during high-performance conditions..
  • Manufactured with a sealing O-ring and constructed with Synthetic Blend Media material with M-Pleat element design..
  • May be used with conventional and synthetic oils. All Oil Filters come with a 1 year limited warranty..
Check Stock

OEMTOOLS 25101 3-Jaw Adjustable Magnetic Oil Filter Wrench, Oil Filter Wrench Small, Oil Filter Wrench Adjustable, Black and Green

  • APPLICATIONS GALORE: This adjustable oil filter wrench removes oil filters on many domestic and foreign light trucks and passenger vehicles, as well as motorcycles and lawnmowers.
  • EXTRA GRIP: Our oil filter puller includes a magnetic base attachment that keeps the oil filter remover securely in place while you remove filter caps.
  • VERSATILE: This auto adjustable oil filter wrench fits filter sizes between 2.4 to 3.6 inches (60MM to 93MM).
  • HOLD ON TIGHT: Our adjustable filter wrench features spring-loaded jaws for a more secure grip than the average oil filter claw wrench.
  • DON'T GET STUCK: Working in tight areas is hard enough without stuck on filters.
  • This compact adjustable oil filter removal tool removes tough filters in tight spaces.
Check Stock

BMC (WA250-500) Automotive Air Filter Complete Wash Kit

  • BMC Filters are constructed using a process called "Full Moulding" developed by the BMC F1 R&D team.
  • BMC air filters are designed and produced to ensure a higher air flow than OEM air filters.
  • The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.
  • BMC Air Filters are washable and reusable, perfect for high performance applications.
Check Stock

Universal Adjustable Oil Filter Wrench From 2-1/2 inch to 4.5 inch Oil Filter Wrench Tool Set With 3 Jaw

  • Function: This oil filter wrench is designed to help you remover the toughest filters on your vehicle.This wrench has three jaws design and it will make you work much more easier..
  • Special Design: This oil filter wrench has new designed with three jaws.It will gives much more catching strength to the filters and make the remove easier..
  • Fitment: The oil filter wrench can be adjust to remover the filters from 2-1/2 inch to 4.5 inch filters.Fits 1/2 and 3/8 inch square drive ratchet or 7/8 inch wrench in all kinds of vehicles..
  • High Quality: The oil filter wrench is made of 45# carbon steel which has a higher strength than normal materials.It is totally rust and corrosion resistant and waterproof.Gives it a long time performance..
  • Warranty:1-Year / 365-Days Unlimited Mileage Warranty.Your Purchase is Backed by our Rock-solid Satisfaction Guarantee..
Check Stock

A ABIGAIL Adjustable 3 Jaw Oil Filter Wrench Tool Best for Removing Motorcycles Cars Trucks & Heavy Duty Oil Filters Fits Diameters 2 1/8-4 1/2 Inches Fits ⅜ and ½ inch Drive

  • 【High Quality】 The oil filter wrench is made of 45# carbon steel. This kind of material is much stronger than the normal materials. With the shinning painting on the surface, the filter wrench is totally rust and corrosion resistant..
  • 【Special Design】 The oil filter wrench is specially designed with three jaws. These three jaws will catch the filter more tightly..
  • 【Application】 The oil filter wrench can be adjust to remover the filters from 2-1/2 inch to 4.5 inch filters.Fits 1/2 and 3/8 inch square drive ratchet or 7/8 inch wrench in all kinds of vehicles..
  • 【Function】The oil filter wrench is a universal tool to remove the filters on your vehicles. Sometimes the filters are very tough. Then you need a oil filter to make your work easy..
  • 【Service】100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

WORKPRO Oil Filter Wrench/Pliers Set, 2-piece, 9" & 12", Adjustable Oil Filter Removal Tool, for Engine Filters, Cars, and Trucks

  • WHAT YOU GET- The adjustable oil filter wrench set includes 9-inch and 12-inch adjustable wrenches. This is particularly useful if you have several vehicles with filters of various dimensions. The set would be good for basic home use, such as auto motorcycles, truck repairing, installing oil filters and removal, and general assembly tasks.
  • HIGH-QUALITY MATERIAL- The materials of wrenches determine their durability. Our wrench head is made of high-quality forged carbon steel, heat-treated for durability. Drop-forged construction and corrosion-resistant black finish prolong the service life.
  • 5-POSITION SLIP JOINT DESIGN & ADJUSTABILITY- The 12" oil filter clamp has a maximum opening of 3-3/4" and a minimum opening of 2-1/2". The 9" plier can be fit for 1-3/4" to 3" oil filter. If your filter fits within these diameter dimensions it will work. In addition, the 5-position slip joint is designed to quickly adjust to size, and large teeth are set at a right angle to the jaw so they bite in either direction for a sure grip on slippery, oil-covered filters.
  • LONG REACH- The long enough handle provides extra reach and leverage in tight places. The bigger ones have longer handles and grips and can help you get to areas in which the oil filter is hard to reach.
Check Stock