Categories

Best Oil Can With Spout

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

  • Gas Can Spout Replacement kit,Suitable for most 1/2/5/10 gallon oil cans, We provide 12 threaded collar caps 6 Coarse Thread & 6 Fine Thread . As shown in the picture The internal thread size is 1-3/4--1.7in , It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
Check Stock

Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gallon oil cans, We provide 6 threaded collar caps 3 Coarse Thread & 3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,4 Each set of products....
Check Stock

Blulu 4 Pieces Jar Oil Spout Lid Oil Pour Spout Dispenser Lids Oil Spout Lids with Caps Compatible with Mason Jar

  • Package content: comes with 4 pieces of stainless steel oil spout lids in a pack, adequate enough for daily using and replacing.
  • Practical function: the screws of oil spout lids has designed with a silicone seals to ensure they are airtight, watertight and leak-proof, can....
  • Multiple usages: our oil spout lids are suitable for oil, syrups, liquor, honey, vinegar, wine and olive storage, keep them in clean and fresh....
  • Appropriate size: our oil spout lids can support for jar or bottle that its opening size is approx. 7 cm/ 2.76 inches in diameter, fit for and....
  • Applicable scenes: these stainless steel oil spout lids are necessary tools for home, kitchen, restaurant, coffee shops, bar indoor cooking, outdoor....
Check Stock

AIRTIGHT Olive Oil Spout for Olive Oil Dispenser - UK Patented Oil Pourer - Hygienic One Handed Open Close Mechanism Keeps Oil Fresh. Dust Caps | Pour Spout Cover | Screens Alternative - Green 2 PCs

  • ✅ FITS A WIDER RANGE OF OLIVE OIL BOTTLES. NOW INCLUDES NEW SPARE BUNG TO FIT EVEN MORE BOTTLES - While other oil dispenser spouts have a poor and sloppy fit. resulting in leaks and mess, the POURA olive oil pourer features a more universal and secure fit for your olive oil bottle so you avoid any accidental spillage and leakage.
  • ✅ FAST AND ACCURATE FLOW - Some oil pourers are frustratingly slow to pour onto your salad, but the POURA olive oil dispenser spout has a consistent flow you're able to control so you can pour just the right amount of oil onto your salad..
  • ✅ OLIVE OIL STAYS FRESH - Good quality olive oil deserves to be looked after. The POURA oil dispenser spout features a patented open and close mechanism allowing you to simply open and close with one hand, so you can not only regulate the flow of oil more accurately, but you can close the Oil Pourer and prevent the oil from oxidizing. This ensures your oil stays fresher for longer..
  • ✅ SAVE MONEY IN THE LONG RUN - You may have used a cheap olive oil spout that doesn't fit, is poorly constructed and pulls apart. Or rusts resulting in you havin ....
Check Stock

Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can....
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(3Kit-Yellow) with 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • Gas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans, female thread size as shown, please measure your gas cans spout mouth size before purchasing. The new upgraded coarse threaded can spout cap reduces the height of the thread cap to ensure that the cap can be completely sealed..
  • High quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps).
  • Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coa....
Check Stock

CSBD 2.5 Gallon F-Style Clear Plastic Jug with Child Resistant Lid 1 Pack Storage Containers with Ergonomic Handle HDPE Construction for Residential or Commercial Use

  • Mess Free: The oil measuring dispenser is the ideal size for easy handling.
  • This oil measuring container helps prevent any possible spills while....
  • Monitor Flow: The translucent polyethylene material of the oil dispenser with measurements allows you to monitor fluid’s flow as you pour.
  • Flexible Spout: The liquid dispenser with spout features a flexible 8 inch spout that can get into hard-to-reach areas.
  • Pour Variety of Liquids: This oil container with measuring is ideal for oil, coolant, transmission fluid, water, and more.
  • Ergonomic Handle: The plastic oil can features an ergonomic handle for maximum gripping comfort.
  • Handle on oil fill container features a no-slip....
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(1 Kit-Yellow) with 2 Screw Collar Caps(1 Coarse Thread &1 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, As shown in the picture The internal thread size is (1-3/4--1.7in), It can only be used for gas cans with a can mouth size of 1.75in. Please measure your oil cans mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (gas can vent caps-A) is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use. (gas can vent caps-B) is used for another oil can with a vent cap at the tail, Can repl....
Check Stock

Gas Can Spout Replacement ,Gas Can Nozzle,(2 Kit-White) with 4 Screw Collar Caps(2 Coarse Thread &2 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps,Thick Rubber pad,Spout Cover,Base Caps

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas con vent caps, (Gas Con Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Con....
Check Stock

Oregon 562407 Economic Combi-Can 5+3 litres Red

  • 2 Spout 3" straight spout with copper nozzle 10"long flexible spout which can be bend easily and orient-able hold the position perfectly. This makes....
  • Metal Black hand pump oil can is made of high quality steel, durable, wear resistant. Epoxy finished surface is rust-proof and easy to clean..
  • 10 oz oiler can is perfect for one handed operation, especially in tight spaces. Easy to store and carry. It’s widely used in lubricating field,....
  • Oil can pump with a heavy-duty precision piston, over-sized handle and easy thumb pump trigger, easy to use. High volume of fluid is delivered with....
  • Pump oil can the new seal structure, increase 35% pressure, increase 25% oil rate, prolong the lifetime to two times..
Check Stock

Frienda Gas Can Spout Gaskets Rubber Ring Can Gaskets Fuel Washer Seals Spout Gasket Sealing Rings Replacement Gas Gaskets Compatible with Most Gas Can Spout (10 Pieces)

  • EXTENDED SPOUT: This Spout Kit Can Be Used As An Extended Spout Where Length Of The Nozzle Really Matter So As To Access Hard To Reach Places Without Any Spill or Mess. It is made with prime HDPE (High Density Polyethylene) full of flexibility and unbreakable quality plastic material .Let's hit the roads & transform your old can with this FLEXIBLE GAS SPOUT REPLACeMENT that can transfer fluids easily. Kool Products Gas Can Spout Replacement prevents you from spills by making it easy to bend the spout to reach any direction..
  • As shown in the picture the internal thread size is 1.7 inch, Suitable for most 1/2/5/10 gallon oil plastic cans. Please measure your oil tank mouth size before purchasing..
  • TWO GAS CAN CAPS: Black cap is fine coarse and used for older Briggs and Stratton, Rubbermaid, Essence, Blitz and Gott cans. Yellow cap is Coarse Thread and used for Midwest, Scepter and Chilton, Jerry can adapter. One of the great ways to transform your old gas cans with a new touch. There's no reason to put away the rusty cans when you have a 5 Gallon Gas Can Nozzle Replacement from Kool Products. This Flexible Gas Can Nozzle also has a smooth flow action manufactured excellently.
  • SUPER FLEXIBLE SPOUT: You Can Add As Many Spouts You Want & Still....
Check Stock

Goldenrod 5in Rigid Spout Oiler

  • All steel body - double seamed base,Durable and resist rust,8 OZ metal can.
  • Wide base for added stability,Seamless drawn body won't leak on the bottom..
  • Seamless drawn steel body. Detachable rigid spout，oil nozzle USES pure copper to make the oil evenly..
  • Easy thumb pump trigger, compact and perfect for oil jobs in tight spaces for home, auto or other applications!.
  • Package Include 2 oil metal can with 2 spout straight.
Check Stock

WirthCo 94367 Measuring Container 5 Liter

  • RELIABLE SPILL-RESISTANT OIL JUG: Engine oil dispenser good for up to 10 liters of oil storage.
  • container is easy and safe to pour—with no....
  • POUR OIL WITHOUT SPILLING: Small oil pourer spout fits easily in your oil-fill port without the need for an engine oil funnel.
  • RUGGED CLEAR PLASTIC BUILD: This is more than an oil container funnel pitcher, and its plastic body will hold up to a wide variety of automotive....
  • UNIVERSAL OIL-CHANGE TOOL: With this pitcher’s 10 Liters of oil storage, you can refill most cars and trucks during routine oil changes.
  • FULL SPECIFICATIONS: Safely stores and pours up to 10 liters of fluid.
  • Two handles make it easy to carry and pour.
Check Stock