Categories

Best Oil Consuming Engine

TRIBLE SIX 50CC 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit Set (Black)

  • 2-stroke 50cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 30km/h as fast as a motorcycle or scooter.
  • Fits for most 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke 40mm x 38mm=48cm3, Max. power 1.6Kw/6000r/min (3 horsepower/6000r/min), Super fuel-efficient, only consuming 1.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
Check Stock

MOTOOS 80CC 24' 26' 28' Bicycle Engine Kit Bike Bicycle Motorized 2 Stroke Cycle Motor Engine Kit (Silver)

  • MOTOOS 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
  • Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
Check Stock

80cc Bicycle Engine Kit 26' 28' Bicycle Motor Engine Kit 2 Stroke Gas Motorized Bike Motor Kit Upgrade Silver

  • Bicycle 26 & 28 inch: Fits for most 26″ or 28′ wheeled bikes with V-frame. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″).
  • 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check Stock

SUNROAD 50cc Bicycle Engine Kit 26' 28' 2-Stroke Motorized Motor Bike Kit for Mountain and Road Bike Cycle Motor Kit Black

  • This 2-stroke 50cc engine kit is perfect to upgrade the regular bike to a motorized bike, you can enjoying riding at a faster speed, which can reach 30km/h as fast as a motorcycle or scooter..
  • Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check Stock

PEXMOR 50cc Bicycle Engine Kit, 2-Stroke Petrol Gas Motor Engine Set, Motorized Bike Cycle Complete Engine Refit Kit, Super Fuel-efficient for 26' 28' Bicycle (50cc (Silver))

  • 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
  • Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check Stock

80cc 2-Stroke Engine Only For Motorized Mountain Bicycle 26' 28 Road Bike Black

  • Heavy duty metal engine body for added durability. NOTE: 80CC engine only!.
  • Super fuel-efficient, only consuming 2.5 litre fuel per 100km..
  • Fit for most type 26" and 28" bikes, such as mountain bikes, road bikes,cruisers, choppers.
  • You will be able to stop or start the engine as you ride. High quality with competitive price can be realized here!.
Check Stock

80cc 2-Stroke Engine Only For Motorized Mountain Bicycle 26″ and 28″ Road Bike Motorised Bicycle Bike Cycle (Silver)

  • Heavy duty metal engine body for added durability. NOTE: 80CC engine only!.
  • Super fuel-efficient, only consuming 2.5 litre fuel per 100km..
  • Can speed up to 55km/h. this is the fastest but safe speed, enjoy it.Heavy duty metal engine body for added durability..
  • Fit for most type 26″ and 28″ bikes, such as mountain bikes, road bikes,cruisers, choppers..
  • You will be able to stop or start the engine as you ride. High quality with competitive price can be realized here!.
Check Stock

Zerostart 3400072 Silicone Pad Heater Engine Oil, Transmission Fluid, Reservoir and Hydraulic Fluid Heater, 2¼\ x 4\ | 120 Volts | 125 Watts

  • Quickly Warm Your Engine - In the cold winter days, use silicone car engine heater pad will fast heat up your engine oil pan ensure that your engine and transmission fluid circulates efficiently before starting.
  • Heat Up Oil Flow - Self-adhesive oil pan heater pad battery heater pad engine block heater pad will improve oil flow, transmits heat to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine, reduces engine wear and tear.
  • Silicone Covered & Thermostatically Controlled - Silicone coating resists oil, acid, and water, and adds strength and longevity to these oil pan, reservoir and transmission pan.
  • heat for 10 to 15 minutes that keeps the heating temperature at a constant 194 F /90°C, increases engine longevity and extends transmission life.
  • Built-In Overheat Protector - 4 x 5 inch/10.2 x 12.7cm car engine heater pad is rated at 120 volts and produces up to 150 watts, oil pan heater pads built-in automatic thermal protector, effectively preventing safety hazards caused by high temperatures.
  • Easy Set Up - Easy to install, as car engine heater pad requires little mechanical ability, before use, please wipe clean the dust on the surface to keep it dry, and peel off the paper backing from the oil pan heater pad and a....
Check Stock

EONLION 10 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black Usable To Cool Down Engine Oil Increases Engine Oil Capacity Available Comes with 2 Oil Lines

  • ADVANTAGES- Made of high quality T-6061 aluminum. It can be used to cool engine oil, transmission and rear differential..
  • FUNCTION- Keep the oil temperature low to prevent damage or even seizure of the engine..
  • HOW IT WORKS- The 10-row oil cooler is basically like a radiator to cool your oil. Install the engine oil in a reasonable location with good air, your engine oil will enter the engine oil from here, and then reflux and cool down, and ensure that the engine oil is within a certain working temperature range..
  • ADAPTATION- This is a universal oil cooler kit. The design of this oil cooler is smaller and lighter, suitable for narrow spaces and meet the needs of more lines at the same time..
  • WHY DO WE NEED AN OIL COOLER KIT-When the engine rotates at high rpm under high load, it will generate friction, and the heat generated by friction will be transferred to the oil instead of overheating. After the engine oil is decomposed, it cannot be lubricated well, thus shortening the service life of the engine..
Check Stock

YAMATIC 7/8\ Shaft Vertical Pressure Washer Pump, 2600-3000 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with 308653052, 308653093, 308653009, 308653008, 308653006

  • ...nting flange provides a convenient connection to most 3/4’’ diameter shaft. If you are not sure your high pressure washer could fit or not, please inform us your engine model, install size, and send us your former pump's pictures, or any after-sales problems, we would like to service you. Pls notice - Pumps are consuming products, running about 2-3 years..
Check Stock

Mopar 82215366 Front End Cover Jeep Gladiator Wrangler W/ Diesel Engine

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock

Engine Oil Cooler Kit - Compatible with Ford Trucks - Powerstroke 6.0L V8 F250, F-350, F450, F550 Super Duty, Excursion, E350, E-450 - Replaces Part 904-228, OCK388, 3C3Z 6A642 CA - Gasket Seal Kit

  • Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |..
  • Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models....
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock