Best Oil Cooler Hose Fitting - TopShopReview.com

MR HELLO Thread Adapter Straight Fitting 5/8x24 Anodized Aluminum Black Flare Reducer Hose Union

Oil Filter Thread Adapter Straight Fitting fit all oil cooler fuel tank fuel pump fluid Line..
Flare Hose Union Oil Tank Fitting Fits commonly available filters such as:STP S3600 FRAM PH33600 Purolator PSL30001 NAPA 4003 WIX24003.
Fitting Size:Female 5/8-24 to Male 3/4-16 13/16-16 3/4 NPT.
Materia:these Automotive Threaded Adapter is made of aluminum 6061.
NPT threads creates a seal by a wedging action.It is a tapered threads and can give an effective seal for pipes using hydraulic fluids..

Check Stock

Dorman 625-209 Engine Oil Cooler Hose Assembly Compatible with Select Cadillac / Chevrolet / GMC Models

Ideal replacement - this engine oil cooler hose assembly is a direct replacement for the original hose assembly.
Quality materials - this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler.
Easy to install - no special tools required.
Quality tested - rigorous quality control ensure this hose assembly conforms to product standards.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....

Check Stock

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

...along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
We Provided 12 months warranty from the date of purchased. Free return within 30 days NO QUESTION ASK..

Check Stock

8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)

【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
【Warranty】Three months limited warranty & Free lifetime technical support..

Check Stock

Transmission Cooler Hose Fitting Fit for Chevy Ford Mopar GM GMC Buick Cadillac Cars and Trucks Stainless Steel Braided Lines Replace TH350/ 700R4/ TH400 -52 Inch

Fitment - Transmission cooler hose fitting fit for Chevy Ford Mopar GM GMC Buick Cadillac Cars and Trucks..
Product Size- This stainless steel flexible braided transmission hoses, each 3/8" inner diameter hose is approximately 52" in length, and comes with....
Replace Number - Transmission cooler hose fitting replace number is TH350 700R4 TH400..
Compatible with -The universal kit is perfect for your Rat Rod, Hot Rod, Street Rod, Muscle Car, Custom and more.
Package Include - AN-6 flared to 1/4" NPT billet adaptors, fits most 700R4, TH350, TH400.
Please check fitting size prior to ordering (Some are 1/4"....

Check Stock

Dialed: The secret math of a perfect mountain bike setup

[Great Valve Package] In this package, you will get 4pcs brake lever covers and 4pcs compression nuts, 6pcs protective sleeves, 4pcs oliver and 4pcs inserts, 1 roll 2500mm bicycle hydraulic disc brake hose, 1pc bicycle hydraulic hose fitting insert tool and 1pc hydraulic hose cutter, total 25pcs. Complete kit can fully meet your needs, which is ideal for Shimano BH59 System, you don’t need to find and buy other accessories, saving your time and money..
[Reliable Material] Brake hose is made of high-quality material and nylon coating, which is durable and stable. 2500mm length pipes can be cut according to your needs. Precision made with fine workmanship, high temperature and low temperature resistance, high blasting coefficient and enough safe. Needle driver insertion tool is made of aluminum alloy CNC process, it feels good and durable..
[Hose Fitting Insert Tool] It is easy to use, super utility needle driver insertion tool. Attached hydraulic hose cutter, sharp and achieve precise and smooth cutting, clean and no burrs. Quick change adapter design, it can match with all needle driver olive and barb on the market, making maintenance easier..
[How to Use] You can install hose fitting cleanly and gently. First, put the olive into the oil pipe, seco....

Check Stock

6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver

【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
Inner Hose Material: CPE Synthetic Material Hose..
【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..

Check Stock

Rac Performance 8AN to 10AN Expanding Hose Fitting 8AN Female to 10AN Male Flare Extender/Reducer Aluminum 8AN to 10AN - 2Pack Black

8AN Female to 10AN Male Flare Hose Union Expander.
Black anodized finish for great appearance and suitable for most fluids.
Made of high‑quality lightweight 6061-T6 aluminum material for strong strength.
Fuel Hose Line Fitting fully compatible with gasoline and alcohol based fuels.
Universal application for Oil cooler / Gas / Water / Fuel tank / Fuel pump/ Fluid Line/ Air Line.

Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Check Stock

MOTOCOCHE 40,000 GVW Low Pressure Drop Transmission Oil Cooler Kit with Mounting Hardware, Towing Hitch Engine Oil Coolers & Kits Advanced Cooling Protection Replaces LPD47391 47391 OC-4739-1

Main Function -- As an auxiliary component, the transmission oil cooler can keep the temperature of the hydraulic oil in the gearbox low and extend the service life of the transmission and engine..
Wide Application - Suitable for car, vans, light trucks, R.V. and towing applications, applications up to 40,000lbs gross vehicle weight. It will work on any vehicle as long as you have room to have air flow through the transmission oil cooler. Replace OEM part number LPD47391 47391 OC-4739-1..
Brazed Aluminum Structure -- Adopt durable brazed aluminum structure to provide advanced cooling protection, strong heat transfer and higher cooling performance..
What You Will Get -- Low pressure drop transmission oil cooler kit includes transmission Oil Cooler, cooler hose, hose clamps, bolts, nuts, washers, steel mounting straps and brass fittingsd, etc..
Quality Service -- We wholeheartedly provide you with the best service, 1 years warranty and 7*24 hours online answering your questions about the product, you are welcome to contact us at any time..

Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..

Check Stock

LIONMAX Barb Splicer Mender 4 PCS, Brass Barb Union Hose Fittings, 5/16 Inch to 5/16 Inch Barb Hose ID, with 8 Hose Clamps, for Air/Water/Fuel/Oil

【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
【PACKAGE CONTAINS】5/16'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
【TIGHT CONNECTION】5/16 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 5/16'' hose ID hose barb fittings. Meet your multiple needs..

Check Stock