Categories

Best Oil Cooler Thermostat Relocation Kit

Engine Oil Cooler Kit - Compatible with Ford Trucks - Powerstroke 6.0L V8 F250, F-350, F450, F550 Super Duty, Excursion, E350, E-450 - Replaces Part 904-228, OCK388, 3C3Z 6A642 CA - Gasket Seal Kit

  • Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |..
  • Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models....
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

EONLION 10 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black Usable To Cool Down Engine Oil Increases Engine Oil Capacity Available Comes with 2 Oil Lines

  • ADVANTAGES- Made of high quality T-6061 aluminum. It can be used to cool engine oil, transmission and rear differential..
  • FUNCTION- Keep the oil temperature low to prevent damage or even seizure of the engine..
  • HOW IT WORKS- The 10-row oil cooler is basically like a radiator to cool your oil. Install the engine oil in a reasonable location with good air, your engine oil will enter the engine oil from here, and then reflux and cool down, and ensure that the engine oil is within a certain working temperature range..
  • ADAPTATION- This is a universal oil cooler kit. The design of this oil cooler is smaller and lighter, suitable for narrow spaces and meet the needs of more lines at the same time..
  • WHY DO WE NEED AN OIL COOLER KIT-When the engine rotates at high rpm under high load, it will generate friction, and the heat generated by friction will be transferred to the oil instead of overheating. After the engine oil is decomposed, it cannot be lubricated well, thus shortening the service life of the engine..
Check Stock

6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel

  • Made of by high quality aluminum and Brass,prevent high oil temperature result in costly fuel systems and engine failure.Instead of spending a high price to replace the 6.0-liter oil cooler, it is more appropriate to spend a little free time to clean it. And our products can be used repeatedly..
  • With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
  • No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
  • It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglec....
Check Stock

Hycency Programmable Thermostat Outlet, Heating & Cooling Plug in Thermostat (White)

  • Programmable Thermostat outlet: The thermostat outlet comes with heating and cooling mode. It is programmed by the remote control and the temperature control range is 32-158℉(0-70℃). Control distance reaches 66ft in the open area. Choice of ℉ or ℃ temperature display on LCD..
  • Energy Saving: This hycency thermostat outlet saves energy by reducing wasted energy in your home. it can help save energy costs on heating or cooling and make your home not only Comfortable but energy efficient..
  • No need installation: Plug and play, no installation or wiring, easy to use. plug your portable heating or cooling unit into the thermostat outlet, and you’re ready to go..
  • Easy Operation: Remote control and thermostat outlet automatically match, then select heating or cooling mode and set the target temperature. thermostat will play with your home device. Built-in temperature sensor for accurate reading temperature..
  • APPLICATION: The thermostat plug allows control any 120 volt device up to 15 amps. It can help you control the room temperature accurately. Suitable for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater,etc..
Check Stock

Wireless Programmable Thermostat Plug, Hycency Automatic Heating & Cooling Outlet Thermostat Wireless Temperature Controller Built in Temp Sensor with Remote Control LCD Display (1 Pcs)

  • PROGRAMMABLE THERMOSTAT: Programming the thermostat via the remote control, control distance reaches 66ft in the open area. With heating and cooling mode, thermostat allows you to program at temperature range 32-158℉(0-70℃)..
  • SAVE MONEY: This thermostat will help make your home not only Comfortable but energy efficient. The thermostat can save energy costs on heating or cooling. It saves energy by adjusting the temperature..
  • INSTALLATION: No installation or wiring, just plug thermostat into an outlet, plug your portable heating or cooling unit into the thermostat, and you’re ready to go. You can move thermostat plug to your desired position, convenient and flexible..
  • EASY TO USE: Automatic matching remote control and thermostat plug. select the heating or cooling mode via the remote control and set the target temperature. Accurate temperature control of ±1℃ for consistent comfort. Choice of ℉ or ℃ temperature display on LCD..
  • SAFE AND RELIABLE: 3-Prong thermostat plug with grounded terminal, recoverable overload short circuit and maximum load current up to 15A. Suitable for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater..
Check Stock

Derale 15840 Hyper Dual-Cool Remote Cooler

  • Keep your transmission fluid cool with a 26,000 GVW transmission cooler kit and fan..
  • Small transmission cooler size: 11 1/4” X 18 1/2” X 3 3/4“..
  • Aftermarket cooler fan size: 11” diameter, 500 cfm, with 5.6 amp draw..
  • Trans cooler kit with a push or pull option for the fan depending on your needs..
  • Black powder coated oil cooling system for long life and good looks..
Check Stock

EVIL ENERGY 10 Row AN10 Oil Cooler Kit Universal 10AN Engine Transmission Aluminium Alloy Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep low oil temperature, help to improve the lubricating effect of engine oil, prevent parts damage and prolong engine life.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 10Row oil cooler,Oil Capacity:0.24L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..
Check Stock

EVIL ENERGY 15 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black

  • Universal: universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location: choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function: keep low oil temperature, help to improve the lubricating effect of engine oil, prevent parts damage and prolong engine life.This stacked-plate oil cooler can be used to cool down engine,transmission, and rear-differentials..
  • Size: 10AN 15Row oil cooler,Oil Capacity:0.8L.Test Pressure: 116psi,Burst Pressure:232psi.Material:aluminium alloy..
  • Please measure before purchase.EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..
Check Stock

Engine Oil Cooler Filter Housing Kit with Gaskets, Cap & Seals - Replaces 55566784, 88179-91400 - Compatible with Buick & Chevy 1.4L Vehicles - Encore, Cruze, Cruze Limited, Sonic, Trax

  • Replacement Engine Oil Cooler & Filter Housing Assembly - With Gaskets, Cap & ACM Seals - Keeps the engine oil clean and cool as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil cooler and filter housing..
  • Compatible Replacement for Buick & Chevrolet Vehicles with 1.4L L4 Engine - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Encore | 2011-2015 Cruze | 2016 Cruze Limited | 2012-2018 Sonic | 2013-2021 Trax |. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold..
  • Replaces Part# 55566784, 918-428, 650039, 88179-91400, 55593189, 55594651, 55565385, 55565388 usually found on popular Encore, Cruze, Cruze Limited, Sonic Trax including year models 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21. It is best and practical to replace the whole housing rather than waste time trying to find where the leak is as it can be from the cracks on the housing or seals..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM....
Check Stock

Engine Oil Cooler and Filter Housing Adapter Kit - Replaces 68105583AF, 68105583AE - Compatible with Chrysler, Dodge & Jeep 3.6L V6 Vehicles - 200, Town & Country, Grand Caravan, Wrangler, Ram

  • Replacement Engine Oil Cooler & Filter Housing Adapter Kit - With Intake Manifold Plenum Gasket Set - Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil filter housing adapter..
  • Compatible Replacement for Dodge, Chrysler & Jeep Vehicles With 3.6L Pentastar V6 Engine - 2014 - 2017 200 | 2014 - 2017 300 | 2014 - 2016 Town & Country | 2014 Avenger | 2014 - 2017 Challenger | 2014 - 2017 Charger | 2014 - 2015 Durango | 2014 - 2016 Grand Caravan | 2014 - 2016 Cherokee 3.2L | 2014 - 2015 Grand Cherokee | 2014 - 2017 Ram 1500 | & more. See below for full vehicle list..
  • Replaces Part# 68105583AF, 68105583AE, 68105583AA, 68105583AB, 68105583AC, 68105583AD usually found on popular , Journey, Wrangler, Ram Promaster 1500, 2500, 3500 including year models 14, 15, 16, 17. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold. It is best and practical to replace the whole housing rather than waste time....
Check Stock

Oil Filter Housing Oil Cooler Kit - Compatible with 2014-2017 3.6L Dodge Avenger, Journey, Durango, Jeep Wrangler, Grand Cherokee, Chrysler 200, 300, Town & Country - Replace 68105583AF 68105583AE

  • OIL FILTER HOUSING OIL COOLER KIT - Also known as Oil Filter Adapter or Oil Cooler Housing, encases and protect the oil filter for your vehicle, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean. Beside that, it also cool down the oil that enters the engine..
  • FIT THE FOLLOWING VEHICLE - Compatilbe with 2014-2017 3.6L V6 Pentastar, including 2014-2017 Chrysler 200, 2014-2017 Chrysler 300, 2014-2016 Town & Country, 2014 Dodge Avenger, 2014-2017 Dodge Challenger, 2014-2017 Dodge Charger, 2014-2015 Dodge Durango, 2014-2017 Dodge Grand Caravan, 2014-2017 Dodge Journey, 2014-2017 Jeep Cherokee, 2014-2015 Jeep Grand Cherokee, 2014-2017 Jeep Wrangler, 2014-2017 Ram 1500, 2014-2015 Ram C/V, 2014-2018 Ram ProMaster 1500 2500 3500..
  • REPLACE PART # - Oil cooler replace Mopar 68105583AF 68105583AA 68105583AB 68105583AC 68105583AD 68105583AE, include Oil Filter, Temp Sensor, Bypass Valve, Spring, and Gasket. Commonly found on 14, 15, 16, 17 Chrysler 200, 300, Town & Country, Dodge Avenger, Challenger, Charger, Durango, Grand Caravan, Cherokee, Grand Cherokee, Wrangler, Wrangler JK, Ram 1500, C/V, ProM....
Check Stock

5184294AE Engine Oil Cooler and Oil Filter Housing Adapter Assembly Compatible with 2011-2013 Chrysler 200 300 Town & Country, Wrangler, Dodge Charger, Ram 1500 V6 3.6L

  • [Fitment] 5184294AE engine oil cooler fit for2011-2013 Chrysler Town ＆ Country, 2011-2013 Chrysler 300, 2011-2013 Chrysler 200, 2011-2013 Dodge Journey, 2011-2013 Dodge Grand Caravan, 2011-2013 Dodge Durango, 2011-2013 Dodge Charger, 2011-2013 Dodge Challenger, 2011-2013 Dodge Avenger, 2012-2013 Jeep Wrangler , 2011-2013 Jeep Grand Cherokee, 2012 Ram C/V, 2013 Ram 1500.
  • Replace Part Number] 5184294AC, 5184294AD, 5184304AD, 5184304AE, 5184304AF, 5184294AE oil filter housing with Oil Filter Housing Adapter Assembly Sensor..
  • [Feature] Engine oil cooler made of 8-layer thick plates and 8-layer thin plates, cross double-layer design, which increases cooling efficiency. Helping to extend the life of the oil and engine. The engine oil cooler can keep the engine oil cool and clean..
  • [Perfect Replacement] Our oil cooler and filter housing kit with sensors and gaskets can perfect replacements for damaged ones and work flawlessly..
  • [ Warranty ] We provide a 6-month warranty,If you have any questions,please contact us via amazon, and we will reply you within 24 hours..
Check Stock