Categories

Best Oil Dispener Spout

Blulu 4 Pieces Jar Oil Spout Lid Oil Pour Spout Dispenser Lids Oil Spout Lids with Caps Compatible with Mason Jar

  • Package content: comes with 4 pieces of stainless steel oil spout lids in a pack, adequate enough for daily using and replacing.
  • Practical function: the screws of oil spout lids has designed with a silicone seals to ensure they are airtight, watertight and leak-proof, can....
  • Multiple usages: our oil spout lids are suitable for oil, syrups, liquor, honey, vinegar, wine and olive storage, keep them in clean and fresh....
  • Appropriate size: our oil spout lids can support for jar or bottle that its opening size is approx. 7 cm/ 2.76 inches in diameter, fit for and....
  • Applicable scenes: these stainless steel oil spout lids are necessary tools for home, kitchen, restaurant, coffee shops, bar indoor cooking, outdoor....
Check Stock

Gas Can Spout Kit QJIUBA for 1/2/5/10 Gal Replacement of Old Tanks Includes Nozzle, Vent caps, Rubber Gasket, Drill bits, Auxiliary Base Cap

  • QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling..
  • The gas can spout replacement kit includes complete package: 3 spout kits , 3 spout sealing caps, 3 coarse threaded bases, 3 fine threaded bases, 1 gas can drill , 6 replacement vent caps..
  • The spout kits, and vent cap are equipped with rubber band, play an epic role in sealing and adjust the angle to put Gas into tank conveniently. It is enable to prevent liquid leakage and transport or store fuel well..
  • With the replaceable vent caps, the spout kits aslo works for covering more oil cans. The package includes two oil cans with vent caps,( gas can vent caps-A is applicable to oil cans without a vent at the end of the oil can, you just needa simple drilling and installation when you are ready to use. The vent caps-B is applicable to another oil can with a vent cap at the tail .).
  • QJIUBA Gas Can Spout helps get rid of inconveniences while travelling. The universal Gas Can Spout is aim to help others while driving.
Check Stock

25 Pcs Gas Can Spout Kit QJIUBA 4 Sets for 1/2/5/10 Gal Replacement of Old Tanks Includes Nozzle, Vent caps, Rubber Gasket, Drill bits, Auxiliary Base Cap

  • QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling..
  • The gas can spout replacement kit includes complete package: 3 spout kits , 3 spout sealing caps, 3 coarse threaded bases, 3 fine threaded bases, 1 gas can drill , 6 replacement vent caps..
  • The spout kits, and vent cap are equipped with rubber band, play an epic role in sealing and adjust the angle to put Gas into tank conveniently. It is enable to prevent liquid leakage and transport or store fuel well..
  • With the replaceable vent caps, the spout kits aslo works for covering more oil cans. The package includes two oil cans with vent caps,( gas can vent caps-A is applicable to oil cans without a vent at the end of the oil can, you just needa simple drilling and installation when you are ready to use. The vent caps-B is applicable to another oil can with a vent cap at the tail .).
  • QJIUBA Gas Can Spout helps get rid of inconveniences while travelling. The universal Gas Can Spout is aim to help others while driving.
Check Stock

KP KOOL PRODUCTS Gas Can Spout Replacement with Extension Spout - Gas can Nozzle - Gas can Vent kit & Gasket Filters - Used for Old 5 Gallon Gas can spout - Blitz - Midwest - Scepter and Other Brands

  • QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling..
  • The gas can spout replacement kit includes complete package: 4 spout kits , 4 spout sealing caps, 4 coarse threaded bases, 4 fine threaded bases, 1 gas can drill , 8 replacement vent caps. The spout kits, and vent cap are equipped with rubber band, play an epic role in sealing and adjust the angle to put Gas into tank conveniently. It is enable to prevent liquid leakage and transport or store fuel well..
  • HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage.
  • With the replaceable vent caps, the spout kits aslo works for covering more oil cans. The package includes two oil cans with vent caps,( gas can vent caps-A is applicable to oil cans without a vent at the end of the oil can, you just need a simple drilling and installation when you are ready to use. The vent caps-B is applicable to another oil can with a vent cap at the tail .).
Check Stock

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

  • Gas Can Spout Replacement kit,Suitable for most 1/2/5/10 gallon oil cans, We provide 12 threaded collar caps 6 Coarse Thread & 6 Fine Thread . As shown in the picture The internal thread size is 1-3/4--1.7in , It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
Check Stock

In Search of Balance

  • This pourer set includes 7 copper stainless steel liquor pourers, 7 dust caps and 1 cleaning brush. The best speed pour spout for you..
  • Popular use in home, kitchen, restaurants, coffee shops, bar, nightclub, cocktail bar. Try it out on bottles of spirit, olive oil, vinegar, liqueurs, wine and other dispensing bottle. The bottle topper cork offers the same great benefits..
  • The plated copper pour spout made of food grade stainless steel material. Used as bar pourer for liquor bottles or as oil pourer spout for olive oil and vinegar dispenser bottle. Rubber cork sealing for various sizes of bottle..
  • The pour spout caps are useful addition to any of our standard metal pourers. The cap acts as a barrier to dust. Great way to keep dirt out of your pourer spout and out of your liquor. Useful accessories for the speed pourers..
  • Professional bartender kit. The tapered spout pourer for liquor offers quick, control, accuracy, and the most perfectly consistent pour speed every time. When you use one of our free flow pour spouts you will experience less spillage and less mess. Drip free pouring..
Check Stock

CSBD 2.5 Gallon F-Style Clear Plastic Jug with Child Resistant Lid 1 Pack Storage Containers with Ergonomic Handle HDPE Construction for Residential or Commercial Use

  • Mess Free: The oil measuring dispenser is the ideal size for easy handling.
  • This oil measuring container helps prevent any possible spills while....
  • Monitor Flow: The translucent polyethylene material of the oil dispenser with measurements allows you to monitor fluid’s flow as you pour.
  • Flexible Spout: The liquid dispenser with spout features a flexible 8 inch spout that can get into hard-to-reach areas.
  • Pour Variety of Liquids: This oil container with measuring is ideal for oil, coolant, transmission fluid, water, and more.
  • Ergonomic Handle: The plastic oil can features an ergonomic handle for maximum gripping comfort.
  • Handle on oil fill container features a no-slip....
Check Stock

Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gallon oil cans, We provide 6 threaded collar caps 3 Coarse Thread & 3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,4 Each set of products....
Check Stock

Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can....
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(3Kit-Yellow) with 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • Gas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans, female thread size as shown, please measure your gas cans spout mouth size before purchasing. The new upgraded coarse threaded can spout cap reduces the height of the thread cap to ensure that the cap can be completely sealed..
  • High quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps).
  • Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coa....
Check Stock

LanMa Olive Oil Spout Pourer, 2PCS Stainless Steel Liquor Bottle Pourers Spouts with Rubber Dust Caps

  • PACKAGE : Include 2 pcs stainless steel bottle pourers (individual package)..
  • MATERIAL: Olive oil bottle spout is made of stainless steel, durable and easy to clean..
  • SIZE: The oil spout about 4.3*1.2 inch(L*W),Fit for the inside diameter of 0.94 inch bottle mouth. PLEASEA measure size of the bottle mouth before buying..
  • SPOUT DESIGN: Theses tapered design liquor spirit wine alcohol pourer offers control, less spillage and less mess, and the cap acts as a barrier to fruit flies and other pests. They are a great way to keep bugs and dirt out of your pourer spout and out of your liquor/oil..
  • MULTIPURPOSE: They fits a multitude of different liquor bottle, olive oil glass bottle, oil dispensers ect, easy to remove and replace, The bottle pourer tool designed for professional use in the home, restaurants, coffee shops and diners. Keeps all things clean and help you get rid of slimy hands..
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(1 Kit-Yellow) with 2 Screw Collar Caps(1 Coarse Thread &1 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, As shown in the picture The internal thread size is (1-3/4--1.7in), It can only be used for gas cans with a can mouth size of 1.75in. Please measure your oil cans mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (gas can vent caps-A) is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use. (gas can vent caps-B) is used for another oil can with a vent cap at the tail, Can repl....
Check Stock

Gas Can Spout Replacement ,Gas Can Nozzle,(2 Kit-White) with 4 Screw Collar Caps(2 Coarse Thread &2 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps,Thick Rubber pad,Spout Cover,Base Caps

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas con vent caps, (Gas Con Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Con....
Check Stock