Categories

Best Oil Filter Adapter For Cars

XtremepowerUS 2-1/2 to 4 Two Way 3 Leg Oil Filter Wrench Remover

  • Wide Application - The oil filter wrench can be adjust to remover the filters from 2-1/2 inch to 4 inch filters. Fits 1/2 and 3/8 inch square drive....
  • Special Design - The oil filter wrench is specially designed with three jaws. These three jaws will catch the filter more tightly..
  • Function Type -The oil filter wrench is a universal tool to remove the filters on your vehicles. Sometimes the filters are very tough. Then you need a....
  • High Quality - The oil filter wrench is made of 45# carbon steel. This kind of material is much stronger than the normal materials. With the shinning....
  • Easy to use - This Oil Filter Wrench is used to remove the oil filter from cars and trucks. It is adjustable simply adjust it on the filter by turning....
Check Stock

Intake Air Filter, Universal Car 3" Carbon Fibre Cold Air Filter Feed Enclosed Intake Induction Pipe Hose Kit

  • 【COMPATIBLE】- Air Filter Induction Kit with flexible cold air feed hose, carbon fibre air induction system designed to fit most of cars. Produced according to the professional standard, you can be purchased and used with confidence..
  • 【HIGH QUALITY】- Air Filter with carbon fibre shell, beautiful appearance and lightweight, good noise reduction property and heat insulation. Keep heat to minimum and maximize the air flow..
  • 【FUNCTION】- Intake Air Filter can effectively increase horsepower and improve the gas mileage, make the oil combustion complete and decrease the oil consumption. Reduce engine's carbon deposit and prolong it's service life..
  • 【EXCELLENT PERFORMANCE】- Intake Induction Filter adopt airbox design, it can store a plenty of fresh air and avoid blocked by insufficient air intake while oil return. Extremely improving the smoothness of driving. With washable and reusable filter cartridge, economical and practical..
  • NOTE - Our Induction Kit does not include intake turbine.For some cars,you may need an additional pipe..
Check Stock

Engine Oil Cooler Filter Housing Kit with Gaskets, Cap & Seals - Replaces 55566784, 88179-91400 - Compatible with Buick & Chevy 1.4L Vehicles - Encore, Cruze, Cruze Limited, Sonic, Trax

  • Replacement Engine Oil Cooler & Filter Housing Assembly - With Gaskets, Cap & ACM Seals - Keeps the engine oil clean and cool as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil cooler and filter housing..
  • Compatible Replacement for Buick & Chevrolet Vehicles with 1.4L L4 Engine - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Encore | 2011-2015 Cruze | 2016 Cruze Limited | 2012-2018 Sonic | 2013-2021 Trax |. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold..
  • Replaces Part# 55566784, 918-428, 650039, 88179-91400, 55593189, 55594651, 55565385, 55565388 usually found on popular Encore, Cruze, Cruze Limited, Sonic Trax including year models 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21. It is best and practical to replace the whole housing rather than waste time trying to find where the leak is as it can be from the cracks on the housing or seals..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM....
Check Stock

Dorman 918-258 Automatic Transmission Oil Cooler Compatible with Select Dodge Models

  • Jeep Models.Only for 3.6L 6 cyl (V6) Engine.(For more detailed models and years, please refer to product details)..
  • OEM:68105583AF,68105583AE,68105583AA,68105583AB,68105583AC,68105583AD,68105583A,MS97204,MS19879,MS97205,MS19878..
  • FUNCTION:The engine oil is filtered through the Oil filter housing adapter assembly,It keeps the engine clean and cool, extend the service life..
  • ADVANTAGES:This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation..
  • SUPPORT:At PTNHZ, if you have any question about our product, please contact us right away, we can handle any problems..
Check Stock

Engine Oil Cooler and Filter Housing Adapter Kit 68105583AF 68105583AE Replacement for Chrysler Dodge 3.6L V6 Vehicles 200 Town & Country Grand Caravan Wrangler Ram

  • With Intake Manifold Plenum Gasket Set- Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation..
  • Function- Replacement engine oil cooler & filter housing adapter kit with Intake Manifold Plenum Gasket Set.It allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean.Beside that, it also cool down the oil that enters the engine.
  • Easy to install- Using high-quality materials, it can be directly replaced and installed, which is simple and fast..
  • Fitment- 2014-2017 Chrysler 200 3.6L engine, 2014-2016 Chrysler Town & Country 2014-2018 for Dodge Challenger, 2014-2017 for Dodge Charger, 2014-2015 for Dodge Durango, 2014-2016 for Dodge Grand Caravan, 2014-2017 for Dodge Journey, 2014-2016 for Dodge Ram Promaster, 2014-2017 for Dodge Ram, 2014-2015 Grand Cherokee, 2014-2017 Wrangler and 2014-2016 Cherokee 3.2L engine..
  • Tips- Professional installation is highly recommended. we provide after-sales service for oil filter housing cooler assembly..
Check Stock

Engine Oil Cooler and Oil Filter Housing Adapter Assembly,Compatible With 2011-2013 Chrysler 200/300,Dodge Journey Charger Caravan And More,Replaces 5184294AE

  • ... Chrysler 300, 2011-2013 Chrysler Town and Country, 2011-2013 Dodge Avenger, 2011-2013 Dodge Challenger, 2011-2013 Dodge Charger, 2011-2013 Dodge Journey, 2011-2013 Dodge Caravan, 2011-2013 Dodge Durango, 2013 Ram 1500, 2012-2013 Ram C/V Base. （ Only for 3.6L 6 cyl engine）！.
  • 【Advantage】- Oil filter housing adapter assembly comes with a complete set of accessories required for installation , And comes with pre-installed oil filter, fluid temperature sensor, oil pressure sensor, Bypass Valve & Spring and NBR sealing ring. also comes With 12 pieces of Intake Manifold Plenum Gasket Set for a complete and worry free installation. In addition, one high-quality oil filter is given as a gift, so that you can use it next time you change the oil filter..
  • 【High performance】 -The engine oil is filtered through the Oil filter housing adapter assembly, remove foreign particles it also cool down the oil that enters the engine to maintain the clean and efficient operation of the engine! quality materials used, meets or exceeds OEM standards, 100% tested before shipping. Even though it is not a genuine Mopar oil filter housing, but it works even better and last longer！The price is only a small part of the dealer！.
  • 【After-sales service】-Professional....
Check Stock

KIPA Oil Filter Adapter Replace for Small Block Chevy V8 Engines SBC BBC Spin On Bypass 305 307 327 350 400 396 402 427 454 # 3952301

  • Top Quality Well-Machined KIPA Oil Filter adatper, keep your vehicle oil cooler intact. Bolts right up and fits.
  • MPN: Directly replacement Part Replace for Part # 3952301.
  • Fitment: This oil filter adapter replaces for the Chevy Small and Big Block V8 Engines SBC BBC 305 307 327 350 400 396 402 427 454. Please do match the OE Part Number and the Adapter structure..
  • It Fits the following engines using a spin on filter wix 51069,AC PF25,Morose 22459 from 1968-1986.
  • Important Notice: Two bolts as pictured comes with the adapter, there is no gasket needed to install this part. If you put a gasket on this product it may come apart and get sucked into your motor causing oil pressure loss and damaging the engine badly if not destroying it..
Check Stock

WEILEITE 3.6 Engine Oil Cooler Filter Housing

  • *NEW UPGRADED QUALITY & Improved Manufacturing. Products made in better raw material, Seal upgrade, New Fluororubber gaskets are more durable and prevent leaks better. Make the engine oil cooler have a longer service life..
  • A good oil cooler filter adapter will help prevent oil leaking, keep the engine room working at the normal oil temperature and oil pressure, make you have a safe and pleasant journey..
  • This Engine Oil Cooler Filter is Compatible with 2013 Ram 1500 6 Cyl 3.6L.
  • 2012 2012 2013 Ram C/V 6 Cyl 3.6L. Adapter-Engine Oil Filter, OE No. 5184294AE.
  • Replacement for 2011 2012 2013 Chrysler 200,300,Town & Country.
  • Dodge Avenger,Challenger,Charger,Durango,Grand Caravan,Journey.
  • Jeep Grand Cherokee,Wrangler 6 Cyl 3.6L..
  • Any questions please contact us, we are always here to provide professional help! ***All products are produced according to standard specifications and have been quality-verified before leaving the factory. Some customers think that the size of the product is not suitable, it may be that your model is a little different, and you can use it with simple modifications..
Check Stock

Xtensi Engine Oil Cooler and Oil Filter Housing Adapter Assembly Compatible With 2011-2013 Jeep, Chrysler 200/300,Dodge Journey Charger Caravan 3.6L Aluminium, Replaces 5184294AE

  • Oil Filter Housing Adapter is not a genuine part, it is a direct replacement and will fit, work and look exactly like the factory part. Replace Part Number: 5184294AE. Please check the part number before purchase..
  • Only for 3.6L 6 cyl engine. Compatible with 6 cyl 3.6L engine 2011-2013 Chrysler 200, 2011-2013 Chrysler 300 V6 3.6L, 2011-2013 Chrysler Town and Country V6 3.6L, 2011-2013 Avenger V6 3.6L, 2011-2013 Challenger V6 3.6L, 2011-2013 Charger V6 3.6L, 2011-2013 Journey V6 3.6L, 2011-2013 Caravan V6 3.6L, 2011-2013 Durango V6 3.6L, 2011-2013 Grand Cherokee V6 3.6L, 2012-2013 Wrangler V6 3.6L, 2013 Ram 1500 V6 3.6L, 2012-2013 Ram C/V Base V6 3.6L..
  • Advantage: Keep the engine oil clean and cool. This replacement oil cooler housing comes with a new pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean. Beside that, it also cool down the oil that enters the engine. Direct replacement. Fluorocarbon and HNBR sealing rings are resistant to oil, abrasion and temperature..
  • The oil cooler is made of lightweight aluminum alloy, has 16-plate (8 plate thick and 8 plate thin), can be better cooling. Oil filter housing adapter oil cooler kit comes with a complete set of ....
Check Stock

Adjustable Oil Filter Wrench from 2-1/2 Inch to 4.5 Inch Black Oil Filter Remover with 3 Jaw Design Fits 3/8 Inch and 1/2 Inch Drive

  • Application: The 3 jaw oil filter wrench is a convenient tool helping to remove oil filter cap on cars, trucks, vans, motorcycles. The adjustable 3....
  • Specifications: The oil filter wrench can be adjusted and fit for oil filter caps from 2.5 inch and 4.5 inch. There is also a square bolt on top of....
  • Material: The 3 jaw oil filter wrench is forged with carbon steel which is much stronger than normal material. The surface is powdered with black....
  • Design: The adjustable three jaw design can be used universally. And there are anti-slip material will help to catch the oil filter cap tightly.....
  • Warranty: 100% satisfaction. If you need any help, feel free to ask and we are here to help..
Check Stock

Aluminum Engine Oil Cooler Oil Filter Housing Adapter Assembly 926-876 With Gaskets Sensor Compatible With 2011-2016 Chrysler 200 300, Dodge Charger, Grand Cherokee, Promaster 3.6l V6 68105583AF

  • ...C/V,V6 3.6L 2014-2016 Ram Promaster 1500/2500/3500 and V6 3.2L..
  • 【Replaces Part Number】926-876，926-959，68105583AF，68105583AE ，68105583AA，68105583AB，68105583AC，68105583AD..
  • 【Direct Fit】This aluminum oil filter adapter housing assembly is designed to MEET or EXCEED standards of original factory Engine Oil Filter Adapter. Guaranteed Exact replacement for PLUG & PLAY. Manufactured from quality materials, 100% tested before shipping..
  • 【12-Month Warranty】We provides one-year after-sales service of aluminum oil filter housing cooler assembly. If you are not completely satisfied with the 3.6L engine oil cooler aluminum oil filter housing assembly, you can rely on our free replacement or refund service..
Check Stock

WWDOLL Kids KN95 Face Mask 25 Pack, 5-Layers Breathable KN95 Masks for Children, Black

  • This EMF Outlet Oil Mist Filter is suitable for all Edwards Rotary Vane pumps up to E2M18..
  • This EMF10 EMF-10 exhaust filter assembly is supplied with NW25 clamp, centering ring, O-Ring, NW25 to 3/4 BSP adapter, 1 oil element filter and 1 odor element..
  • The benefits of the oil mist filter includes: protection from oil mist emissions as required by COSHH and health and safety regulations. If the oil element becomes blocked, an integral pressure relief valve opens..
  • This filter is very efficient at 99.999% DOP test and is also azide proof..
  • The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. Replacement oil elements and odor elements are available on this website..
Check Stock

K&N HP-2004 Performance Wrench-Off Oil Filter

  • O/E replacement oil filters for most cars, trucks, SUV’s, motorcycles, & ATV’s.
  • Resin-impregnated filter media traps 99% of harmful contaminants.
  • 1 In. exposed nut designed for easy oil filter removal.
  • Heavy duty construction for extreme conditions.
  • Anti-drainback valve (where applicable) eliminates dry starts, prevents oil from draining back into crankcase during engine shutdown.
Check Stock