Vehicle Maintenance Log Book: Easy-to-use Vehicle Service and Repair Record Book
- Flow Rate of up to 7.1 Gallons with the Included 110V DC Plug-In Adapter, Plug-In Pump, Flip the Switch and Squeeze the Trigger to being the Flow.
- Compatible with Engine oil, Hydraulic fluid, DEF, Diesel, Kerosene, Washer Fluid, Antifreeze, Non-Potable Water and more.
- Discharge Hose Length of 6.6 ft with Flow Control Nozzle / Adjustable Intake Tube Reaches from 2.8 ft to 4.1 ft to fit 55 Gallon Drums to IBC Totes.
- Digital Oil Meter - 35L Flow Rate of Low Viscosity Fluids.
- Backed by a 1 Years Limited Manufacturer Warranty on Defects / Do Not Use with Chlorinated Acids or Drinking Water.
Check Stock
CGOLDENWALL Handheld Ultrasonic Flowmeter Clamp on Flow Meter Portable Liquid Flow Meter with S1+M2 Transducers for Copper/PVC Pipe DN15-700mm 1/2-28\ ((Old or New Panel))
- S1+M2 TRANSDUCERS: Easy to setup the transducers on the pipe and enter the required information in the control unit.No need to destroy the pipeline and stop production during the measurement process.S1(DN15-100mm, 1/2-4"), M2(DN50-700mm, 2-28").
- DIGITAL DISPLAY: The Ultrasonic Flowmeter can display cumulative flow, instantaneous flow, velocity, and working status at the same time. Accuracy: 1%, linearity: 0.50%, repeatability: 0.20% accuracy: ±1%, calibration certs included. Note: In order to provide a better user experience, we upgraded the product label. The product you received may be the old version or the new version.
- DATA STORAGE AND OUTPUT: This Ultrasonic Flow Meter has a built-in data logger, which can store up to 2000 lines of measurement data. And you can download the logged data onto PC through the RS232 interface..
- LONG STAND TIME: This Flow Meter is equipped with a built-in high-capacity rechargeable battery, which can support the flowmeter to work continuously for up to 12 hours..
- WIDE APPLICATION: Come with S1+M2 transducers, and the measuring range is DN15-700mm, 1/2-28". It can work on Copper pipe, PVC pipe to detect the flow of liquids such as sea water, alcohol, river water, industrial sewage, lubricating oil, diesel, fuel oil, etc.N....
Check StockOil Fluid Extractor Pump Suction Gun Transparent Body Changer Vacuum 200cc Chamber Capacity Manual Water Suction Convenient Tool No Leaks No Overfills Hand Gear Transmission With Cartoon soft adhesive
- 【OIL TRANSFER PUMP 】The electronic oil meter gun with rigid tube and manual tip or flexible hose and semi-auto tip, with the appropriate connection to establish a controlled flow through the meter. Used for filling fluid such as gear oil, engine oil, antifreeze, it is a great oil filling equipment for factories, gas stations, etc..
- 【SPECIFICATIONS 】5-digit liquid crystal display for both volume each time and total.
Check Stock
Horiba 9096001700 Plastic Body PH Electrode
- Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
- This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
- Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
- 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
- The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..
Check Stock
CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)
- FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
- MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
- HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
- INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
- MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check StockDIGITEN Water Flow Control Meter LCD Display Controller+G1/2\ Water Hall Sensor Flow Meter Flowmeter Counter 1-30L/min+G1/2\ Solenoid Valve Normally Closed N/C+DC 12V Power Adapter
- ...c. For example, if you want 5 liters of water, you can set up 5 liters of water on the DFC15 controller. When the water in the container reaches 5 liters, the controller will control the solenoid valve to close it, the water flow automatically stops, and you just get 5 liters of water. Please select a suitable flow meter. An oil flow meter is required for liquids other than water..
- ★【Package Includes & Warranty】: Thread type: BSP, but it can work with NPT thread. The controller will come with G1/2" flow sensor, G1/2" solenoid valve(N/C), temperature sensor(it can measure liquid temperature) and 12VDC power adapter. 12 month warranty!.
Check Stock
CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)
- FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
- TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
- ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
- ⑥ max temp of tested liquid: 158°F/70°C.
- MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
- NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
- WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check StockAlphaWorks Double Diaphragm Transfer Pump 1/2" Nitrile/NBR/Buna-N - 12GPM / 45LPM Heavy Duty Aluminum Air Operated Pneumatic Use for Diesel, Kerosene & Oil
- Flow Rate of up to 7.1 Gallons with the Included 110V DC Plug-In Adapter, Plug-In Pump, Flip the Switch and Squeeze the Trigger to being the Flow.
- Compatible with Engine oil, Hydraulic fluid, DEF, Diesel, Kerosene, Washer Fluid, Antifreeze, Non-Potable Water and more.
- Discharge Hose Length of 6.6 ft with Flow Control Nozzle / Adjustable Intake Tube Reaches from 2.8 ft to 4.1 ft to fit 55 Gallon Drums to IBC Totes.
- Digital Oil Meter - 35L Flow Rate of Low Viscosity Fluids.
- Backed by a 1 Years Limited Manufacturer Warranty on Defects / Do Not Use with Chlorinated Acids or Drinking Water.
Check Stock
MR CARTOOL T130 Automotive EVAP Smoke Machine, Dual Mode 12V Car Fuel Pipe System Leak Tester Detector with Oil Level and Adjustable Flowmeter for All Vehicles
- ...t suitable for air conditioning system piping..
- 【Air Mode & Smoke Mode】Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 10 seconds, dramatically reducing diagnostic time. Smoke output value: 6L/min..
- 【Flowmeter, Oil Level Meter & Pressure Gauge】Equipped with pressure gauge, oil level meter and adjustable flow meter. All data are clear at a glance, which helps you better control the smoke effect. Built-in overheat protection, if it exceeds 176°F, it will automatically turn off the power..
- 【Complete Set】Comes with 4.92ft Smoke Hose, EVAP Special Connector, Standard Cone Adapter, Power Cord Clamp, Valve Core Wrench, Airbag Adaptor, Rubber Connector Part, 3.38oz Empty Bottle for test oil(Please notice: Package does not includes the baby oil), Various of Soft Rubber and Hard Rubber Hose Plugs..
- 【Worry-Free After-Sales】MR CARTOOL offers 24-month warranty and 7x24 hours friendly customer service to ensure your shopping experience. No need to pay extra for warranty service, saving you a lot of money! If you have any issues about the EVAP Leak Tester, don't hesitate to contact us directly..
Check StockTERA PUMP - TReDRUMT-M Plug-In Electric 110V AC, Telescopic Suction, Turbine Meter for Engine Oil DEF Diesel Kerosene Hydraulic Fluid 7.1 GPM Transfer Pump | 55 Gal Drums to 275 Gal IBC Totes
- Flow Rate of up to 7.1 Gallons with the Included 110V DC Plug-In Adapter, Plug-In Pump, Flip the Switch and Squeeze the Trigger to being the Flow.
- Compatible with Engine oil, Hydraulic fluid, DEF, Diesel, Kerosene, Washer Fluid, Antifreeze, Non-Potable Water and more.
- Discharge Hose Length of 6.6 ft with Flow Control Nozzle / Adjustable Intake Tube Reaches from 2.8 ft to 4.1 ft to fit 55 Gallon Drums to IBC Totes.
- Digital Oil Meter - 35L Flow Rate of Low Viscosity Fluids.
- Backed by a 1 Years Limited Manufacturer Warranty on Defects / Do Not Use with Chlorinated Acids or Drinking Water.
Check Stock
MR CARTOOL T110 Automotive EVAP Smoke Machine, 12V Car Fuel System Leak Tester Detector with Built-in Vacuum Pump & Pressure Gauge & Air Flow Meter for All Vehicles
- ...Air Mode & Smoke Mode】Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 10 seconds, dramatically reducing diagnostic time. Smoke output value: 6L/min..
- 【Flow Meter & Pressure Gauge】Equipped with pressure gauge and adjustable flow meter to help maintenance personnel to observe the current flow volume and pressure for better control the smoke effect. Built-in over-heat protection, if it exceeds working limit (Over 176℉), it will power off automatically..
- 【Complete Set】Comes with 4.92ft Smoke Hose, EVAP Special Connector, Standard Cone Adapter, Power Cord Clamp, Valve Core Wrench, Airbag Adaptor, Rubber Connector Part, 3.38oz Empty Bottle for test oil(Please notice: Package does not includes the baby oil), Hanging Hook, Various of Soft Rubber and Hard Rubber Hose Plugs..
- 【Worry-Free After-Sales】MR CARTOOL offers 24-month warranty and 7x24 hours friendly customer service to ensure your shopping experience. No need to pay extra for warranty service, saving you a lot of money! If you have any issues a....
Check StockFlow Meter,Aluminum Alloy 1/2 inch Digital LCD Display High Accuracy Fuel Diesel Flowmeter Water Flow Rate Sensor,Control and Measure Low Flow for Gasoline,Kerosene,Engine Oil Blue
- ✔【DIGITAL LCD DISPLAY】The aluminum alloy flow meter has LCD screen display, which can provide clear reading. Meanwhile, the LCD display flow....
- ✔【READING AND ACCURACY】There aluminum alloy fuel diesel flow meter has intuitive clear reading and high reliability on digital stainless steel....
- ✔【WIDE COMPATIBILITY】The high accuracy fuel flow meter is suitable for high viscosity liquid media such as diesel, gasoline, kerosene, engine....
- ✔【RELIABLE QUALITY】The blue LCD display high accuracy aluminum alloy fuel diesel flow meter is 100% brand new and high quality. Meanwhile, it is....
- ✔【100% WARRANTY】We promises every customer a 100% shopping satisfaction, feel free to reach us if you have any questions about your purchase.We....
Check StockForney 85364 MIG Gas Flow Meter and Regulator, MIG/TIG Welders
- Combination of regulator and flow meter as one single stage piston design unit.
- Provides accurate regulation of gas flow.
- Impact resistant machined brass body, polycarbonate flow tube and outer cover.
- Features regulator and flow meter in one unit.
- Provides accurate regulation of gas flow designed for MIG and TIG applications.
Check Stock
