Best Oil Pressure Switch Kit

MOTOR METER RACING 6 Gauge Set Classic with GPS Electrical Speedometer Digital Odometer Black Dial

  • Speedometer & Tachometer: Standard 3-3/8"(85mm) sized back. For any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Volt gauge, Oil pressure gauge, Water temp gauge, Fuel gauge: Standard 2"(52mm) sized back..
  • FEATURES: In-dash design, Light bulb illumination, Convex lens, Stainless bezel, Plastic housing. Cylinders switch on the gauge back..
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI..
  • INCLUDES: GPS Sensor & Converter, Water temp sensor (Thread size: 1/8 NPT), Oil pressure sensor (Thread size: 1/8 NPT), Fuel level sender, Power harness, U-bracket kit, Tachometer Filter x 2, Installation Instructions..
  • One-year warranty for non-human factor damage and free lifetime technical support..
Check Stock

Shankly Mechanical Oil Pressure Gauge Kit Compression Tester - Professional Engine Compression Testing Kit or Gauge Oil Pressure

  • ✅ OIL PRESSURE GAUGE KIT: Shankly's oil pressure gauge is used to monitor the oil pressure in your vehicle. This pump tester prevents you from engine failure, broken hose, or leaking gasket due to lack of oil. Great to have in your toolbox.
  • ✅ DURABLE & GREAT QUALITY: Shankly's oil pressure gauge line is well protected by a rubber bumper and a decent length of hose. It comes with spare orings adaptor and with quick connect couplers, making this a reliable tool and long lasting.
  • ✅ UNIVERSAL: This oil pressure tester includes a 90-degree coupling adapter for limited access applications. This is also fitted with quick coupling adaptors and 1200mm of hose that will serve a mechanic effectively for a very long time.
  • ✅ CONVENIENT HANDY CASE: Shankly's oil pressure tool comes in a convenient case, making transportation, storage, and organizing a snap. This oil pressure gauge line kit works perfectly for your setup.
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this oil pressure test kit will arrive in your place in good condition, If any issues occur, feel free to contact us.
Check Stock

Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator

  • EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
  • DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
  • PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
  • PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
  • WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).
Check Stock

JoyFans Oil Pressure Tester Tool, 0-140PSI Oil Pressure Gauge Kit for Fuel System Mechanical Sensor Engine Cylinder Compression Test with Hose Adapters for Cars ATVs Trucks Use Red Case

  • Fuel Injector Pump Pressure Check: Engine oil pressure test tool kit is designed to test oil pump pressure and check operation of fuel system components. Compare the measured pressure value to the standard reference range from manufacturer, we can take quick and accurate diagnosis and feasible solution on the oil pipeline leakage and engine wear, so as to confirm if the oil pressure gauge has been damaged. No more reliance on the dashboard light..
  • Oil Pressure Tester: The petrol engine cylinder tester kit has a shockproof rubber casing and a large clear dial with readings from 0~140 psi and 0~10 bar for easy and accurate work on both American and metric systems. Keeping the gauge safe from bumps and drops. Built-in hose assembly also comes with a side pressure relief button for instant pressure reset and no repeated hose disconnect, and 4 ft long flexible hose with convenient quick coupler for simple adapter installation and removal..
  • Durable Construction: 11-piece metal adapters are all made with heavy-duty forged steel and brass hardened for maximum strength and longevity.
  • designed to withstand extreme pressure in any situation for professional use. Each thread adapter marked with number, features black oxide finish to resist rust and corrosion.
Check Stock

DEWALT 513002700 Regulator Repair Kit

  • N003307SV Air Compressor Pressure Switch Kit.
  • Includes: Pressure Switch, 2 Leads, Attached Hose, & Installation Instructions.
Check Stock

CATUDIY Automotive Brake Bleeder Kit with Fluid Transfer Pump, Brake Fluid Oil Extractor for Cars Electric Brake System Bleeding Tools with Master Cylinder Adapter Pressure Adjustable 0.6~3bar 110V

  • ...d generating air bubbles during the process thanks to its pulsating brake system. We offer a full line of master cylinder adapters with this equipment, available for all vehicles in European, US, and Asian.
  • ⛽【Secure & Reliable】The brake bleeding tools come with a pressure gauge for better observing the fluid exchange pressure value. Also, The oil change pump used to fill the brake fluid reservoir is of pressure monitoring, which will automatically switch itself if cannot build pressure or the pump pull in air. CATUDIY promises 3-year warranty for damage caused by non-human factors.
  • ⛽【Easy & Time-Saving】This brake pressure bleeder tool is very simple to use and can be operated by one person. There are 4 pumps that can change the brake oil in the meantime. Because of its built-in working pressure bleeder pump, you don’t need to connect extra break bleeder vacuum pump kit.
  • ⛽【2 Power Supply Modes】The brake bleeder kit one person supports 2 power modes: 12V batteries & 110V/220V power outlet, which allows you to exchange brake fluid any time and anywhere - An essential auto tool for personal ....
Check Stock

CW301300SJ Replacement Pressure Switch KIT AIR Compressor Part

  • 95 - 125 PSI Equivalent to Conversion Kit CW301300AJ.
  • This universal pressure switch fits too many brands to list and can be used as a replacement on almost any model of compressor..
  • Includes V201700BL Safety valve, CW207551AV Pressure Switch, CV218500AJ & CW208102AV, Regulator, ST079704AV Tube,.
  • UNIVERSAL PRESSURE SWITCH/CONVERSION KIT.
Check Stock

BACOENG Complete AC Repair Tool Kit for Mini Split/HVAC/AUTO with Tool Bag - Includes 3.6CFM Vacuum Pump, 800PSI Manifold Gauge Kit

  • 【Complete Kit】-an complete refrigerant injection kit for MINI/HVAC/AUTO AC system, with a large-capacity tool bag that can carry all the accessories needed at one time..
  • 【Manifold Gauge】-You could directly read the temperature(℉) and pressure(psi) of R12/R22/R134a/R410a refrigerant on the professional dial. This gauge could be hung on the car/air conditioner cover or other high places through the top hook, freeing your hands for more works..
  • 【Heavy Pressure Hose】-with three high-strength pressure hoses, red for high-pressure pipes, blue for low-pressure pipes, yellow for vacuum pumps.
  • 5FT long for each one, 1/4 SAE to 1/4 SAE, 800 PSI working pressure.
  • 【Powerful Vacuum Pump】-It delivers 3.6 CFM flow rate and 150 Micron vacuum with low noise, which guarantees the vacuum steady of the system. It also make your work moveable and easy to start on its design of handle and manual switch. Motor thermal protection equipped..
  • 【Package include】-Vacuum pump*1 (with vacuum oil*1), manifold gauge*1, Pressure hose*3, car quick couplers*2, 5/16 SAE-....
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • ...alls vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
  • 3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in tight spaces..
  • This set includes 1-1/16 and 1 in. oil Pressure sending unit socket, 3/8 in. drive, 1-3/16 in. Oil pressure sending unit socket, 1/2 in. drive, 1-1/16 in. thermal sensor switch socket, 1/2 in. drive. 7/8 in. heated oxygen sensor socket, 1/2 in. drive, 7/8 in. low profile offset oxygen sensor socket, 3/8 in. drive, 7/8 in. oxygen sensor socket, 3/8 in. drive, 7/8 in. universal vacuum PVS, TVS....
Check Stock

Qiilu Transmission Oil Pressure Switch 28600-RCL-004 Car Auto Trans Oil Pressure Switch Replacement Fit for Honda Accord for CR-V

  • Scope of Application --- The gearbox oil pressure switch Fits for ACURA RSX 2002-2006, Fits for ACURA TSX 2004-2008, Fits for HONDA ACCORD 2003-2007,....
  • Reference OEM --- This gearbox oil pressure switch replaces the OEM number for reference: 28600-RCL-004. Comply with strict quality control standards.
  • High-quality Materials --- The gearbox hydraulic switch is designed and made of high-quality aluminum and ABS, which is stable and durable, and is a....
  • Easy to Install --- The gearbox oil pressure switch is professionally designed, simple to install, and does not require complicated tools. Can replace....
  • Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every product must go through strict....
Check Stock

Aquatec 6800 Booster Pump Kit for up to 100 GPD home RO reverse osmosis water filter system Standard or Manifold, includes pump, pressure switch PSW-240, transformer, 6840-2J03-B224 B221 Made In USA

  • This pump kit includes Aquatec pump 6840-2J03-B224 with heavy duty steel base plate with damper, PSW-240 pressure switch, transformer 110V USA plug, 1/4″ inlet/outlet for pump and pressure switch, detail instruction.
  • This pump is designed to increase the water supply pressure to a RO water system. Increase input pressure from 30-40 psi to 60-80 psi depending on the capacity of your RO system. This pump is good for under 100 GPD (gallons per day) RO systems Most home drinking RO systems are under 100 GPD.
  • Automatic ON/OFF operation. The pressure switch would sense the pressure in the output line, so when the output line is shut off or the storage tank is full or reaches 40-50 psi, the pump would shut off, and then when you start using water and tank pressure drops, then the pump turns back ON to replenish the tank..
  • This kit DOES NOT come with the optional (ESO) Electric-Shut-Off solenoid valve, so it would reply on your existing mechanical auto-shut-off valve in your RO system to turn off the water supply when the tank is full. For most systems this kit will work fine..
  • This kit is NOT for misting, ice maker line, line boosting, water transfer. This pump kit is designed for increasing water supply pressure to a RO water system.
Check Stock

12677836 Oil Pressure Sensor Switch D1846A for Chevrolet/GM Equipment 12616646,12573107, 12562230,12614969, 12569323, 12562230, 12556117, 12559780,8125622300, 8125731070, 8126166460, 1S6713, PS308

  • 【COMPATIBLE VEHICLES NOTE】★★★Buy it with your confidence! ★★please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase our This Engine Oil Pressure Sensor Switch..
  • 【QUALITY & FEATURES】★★In manufacturing, we utilize a laser etching system to calibrate thick film printed circuits. This provides for high accuracy reading of actual oil pressure in vehicle's engine.★★In construction, we utilize high temperature, polyimide film diaphragms. These provide for exceptional cycle durability & resistance to rupture & oil leakage. ★★★ a robust design with high grade materials to meet the stringent demands of today's service professional to insure it lasts longer..
  • 【EASY INSTALLATION】★★★All engine oil pressure sensor units are tested using automated equipment that activates the switch, checks for leaks & stresses the part to ensure specification compliance, even under the most demanding operating conditions. simple structure, easy to install, plug and play, very convenient.★★★ Only 10 mins less for installation.Save your time and money, check youtube video if you have installation problem..
  • 【REPLACES PART & MODEL】 Replaces# 1267....
Check Stock

SCITOO PS417 25070-CD00A Oil Pressure Sensor Switch Fit 2003-2009 for Nissan 350Z, 2005-2006 for Nissan Altima, 2005-2008 for Nissan Armada, 2004-2009 for Infiniti QX56 Oil Pressure Sending Unit

  • COMPATIBLE VEHICLES - Oil pressure sensor for 2004 2005 2006 2007 2008 2009 for Infiniti QX56, 2003 2004 2005 2006 2007 2008 2009 for Nissan 350Z, 2005 2006 for Nissan Altima, 2005 2006 2007 2008 for Nissan Armada, 2005 2006 2007 2008 2009 for Nissan Frontier, 2009 2010 for Nissan GT-R, 2004 2005 2006 2007 2008 2009 for Nissan Pathfinder, 2009 for Nissan Sentra, 2004 2005 2006 2007 2008 for Nissan Titan, 2005 2006 2007 2008 2009 for Nissan Xterra.
  • ADVANTAGES - The oil pressure switch is reliable in operation, extremely high in air pressure accuracy and long in working life. It effectively solve oil pressure gauge reading is not accurate, oil pressure switch engine light come on and low oil pressure problems..
  • PERFORMANCE - Engineered with high-quality materials to ensure trouble-free performance..
  • MATERIAL - Made of high quality & durable material that meets OE standard.100% new oil pressure sensor, not refurbished or re-manufactured parts..
  • GUARANTEE - One Year Warranty available for our this item.Please check picture, OE part number and fitment information to verify this is the correct one you need before your purchase..
Check Stock