TYC 610610 Hyundai Santa FE Replacement Condenser Cooling Fan Assembly

  • Temperature Electrical Switch — Turns on electric fan at 200 Degrees and shut it off at 180 Degrees.
  • Compatible With — 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 Engines.
  • Relay Switch Kit — New 180 to 200 Degree electric fan thermostat relay switch kit for your cooling system.
  • Specifications — 12V 40 Amp 4 Pin Relay & Pigtail, 30 Amp Circuit Breaker, and 3/8" National Pipe Thread (NPT) Switch.
  • Kit Inclusions — Sending Unit, Wires, Relay Switch, Circuit Breaker, Terminals.
Check Stock

Viair 20001 PSI Ultra Duty Onboard Air System

  • Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI.
  • Includes the essential components to install an onboard air system: 480C Air compressor, pressure switch, 2.5 gallon air tank, relay, air tank....
  • 200 PSI maximum working pressure, 1.76 CFM at 0 PSI.
  • Can inflate a 37 Inch Tire from 0-30PSI in 7 minutes and 10 seconds..
  • One Year Manufacturer's defect warranty through manufacturer with receipt. Air tank should be used with a drain cock and pressure release valve..
Check Stock

Electronic Specialties 193 Black 2.5' x 5' 12/24V Diagnostic Relay Buddy Pro Test Kit

  • Tests 5 different relays, both 12V and 24V and 3 diagnostic trouble codes help define the cause of the bad relay.
  • Kit Includes 5 Relay Adapters and blow mold case.
  • Fails bad relays - Good/Bad indication, green light for PASS, red light for FAIL with flashing trouble code.
  • Tests 5 different relays, both 12V and 24V.
  • 3 diagnostic trouble codes help define the cause of the bad relay.
  • #193 Kit Includes 5 Relay Adapters and blow mold case.
  • Quick off-the-car relay tester - checks relay coil & switch contacts.
Check Stock

2NO Joystick Switch Momentary Joystick Switch,XD2PA22CR 2NO 2 Position 2NO Momentary Type Monolever Locked Joystick Switch DPST Toggle Switches

  • The joystick switch is a momentary switch that has 2 normally open contacts.
  • MORE THAN 500, 000 TIMES MECHANICAL LIFE---The joystick momentary switch is of more than 500, 000 times mechanical life, and more than 500,000 times electrical life.
  • 【Waterproof, oil and dust resistant】The rubber sleeve has the characteristic of water resistance, oil resistance and dust resistance.
  • It can control magnetic starter, contactor, relay and other electrical circuits.
  • PHYSICAL ADVANTAGES---The rubber sleeve cover of the joystick momentary switch is resistant to water, oil and dust, the stick returning to its original position once released.
Check Stock

RF Remote Control Reverse Polarity 12VDC Motor Control with Auxiliary Switch Input

  • 1. Wireless Remote Control Kits – The DC 12 volt relay switch is equipped with 4 channel wireless receiver that built with high stability, security and performance. While the included 2 remote controls transmit strong signal that can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, max range up to 164ft/50m with no obstacle..
  • 2. Home Automation Security Relay – Learning code of 433mhz wireless transmission module has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it..
  • 3. Remote Relay with 3 Modes of Operation – Use a jumper to configure 3 modes of operating selection pulse / momentary, hold / toggle and latching mode. 4 independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights..
  • 4. Easy and Flexible Switch Relay – The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input....
Check Stock

SCHNECKE 5S7247-AA Engine Coolant Temperature Sensor

  • Check the Amazon Parts Finder to see if this parts fit your vehicle and check the descroption also to see the detail fitment info.
  • Innovative engineering, manufacturing technology and quality control ensure that SCHNECKE Engine Oil Pressure Switch meet or exceed the performance of the original equipment they replace. Every unit is designed to OE fit, form and function requirements accomplished by leveraging SCHNECKE's OE expertise.
  • SCHNECKE offers complete Engine Oil Pressure Switch coverage for Asian, Domestic and European vehicles, top brand awareness and unsurpassed quality.
  • SCHNECKE warrants its Engine Oil Pressure Switch for a period of One years from the date of purchase. Within this period, we will replace any Engine Oil Pressure Switch shown to be defective in material or workmanship.Designed to provide a perfect fit for a hassle free installation, this reliable product can help you get you vehicle back on the road faster and easier..
Check Stock

LEADTOPS Heavy Duty LED Light Bar 400Watts Load Wiring Harness Wireless Strobe Wiring Kit ON-Off-Strobe RF Remote Control Switch for Work Light Driving Light,2 Years Warranty

  • LEADTOPS Switch Relay: Every light bar need one wiring harness,Eyourlife Power Switch Relay Wiring Harness IP56 Waterproof Illuminated On/Off Rocker Switch.
  • LEADTOPS Security Harness: LEADTOPS Relay will regulate the power to be consistent and prevent any surge, it also comes with a pre-installed inline fuse as well as Switch.
  • Operating Voltage: 12V-24V Amp: 40A Power Relay Fuse: 40A Blade Fuse. ≤400W.
  • Power Switch Relay Wiring Harness: Easy install and will protect your led light bar.
  • It is universal suitable for led work light, led light bar, HID and Halogen lights any 7" 10" 12" 20" 30" 40" 50"52"light bars that is within 300w..
  • Buyer Guarantee - We stand behind our products 100% with a 12-month warranty. We do offer a 30-day money-back guarantee on all orders to allow you to test the LEADTOPS’s products in your daily life..
Check Stock

MUSYSIC Professional 2 Channel 7000 Watts DJ PA Power Amplifier Signal out MU-P7K

  • Stereo Output Power: "2x4000W PEAK, 2x2000W Program, 2x1000W RMS @2Ω" "2x2000W PEAK, 2x1000W Program, 2x500W RMS @4Ω" "2x1000W PEAK, 2x500W Program, 2x250W RMS @8Ω".
  • Bridge Output Power: "4000W PEAK, 2000W Program, 1000W RMS @4Ω" "2000W PEAK, 1000W Program, 500W RMS @8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) : <0.23%20Hz-20KHz / Siew Rate >30V/us / Damping Factor >150 / Output Circuitry: Class AB / Signai to Noise Ratio ≥96dB / Cross Talk >80dB / lnput Sensitivity(8Ω) 1V /.
  • Connectors: Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
  • Dual cooling fans / Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit. / lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit. / Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..
Check Stock

eMylo WiFi Relay Switch Wireless Light Remote Control Module For Smart Home Automation Compatible with Alexa DIY 6 Packs

  • 【APP Remote Control】 Wifi smart relay switch can work with Smart Life and Tuya Smart APP, you can turn on or turn off switch via smart phone anytime and anywhere, you can turn off home lights on the way to the firm, it only supports 2.4Ghz Wifi, no gateway required..
  • 【Timer and Schedule】 Wifi relay switch have timing function, you can preset a specific time to turn on or turn off home light by Smart Life or Tuya Smart APP, which can help you to decrease electricity consumption, so save your money..
  • 【Voice Control】 Smart light switch can compatible with Alexa and Google Assistant, when you’re busying cooking or doing housework, you just send out a voice command to turn on or turn off lights, which can release your hands..
  • 【Simple to Install】 Smart relay switch is simple to install, only need to connect the live wire and neutral wire at both ends of the smart switch, Connecting 1 end to the power supply and the other end to the light..
  • 【Families Share】 Wifi smart relay switch support families share, you can share this device to your families, so your famili....
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

Painless Performance 80132 Single Pole, Double Throw Relay, 40 Amp

  • ★ The 8-channel relay module is equipped with transistors, diodes and optocouplers to switch higher loads safely, reliably and with little power. The module is also equipped with generously dimensioned relays in order to be able to reliably carry out many switching processes..
  • ★ 5V 8-channel relay module, each relay requires 70mA for switching (switching capacity AC: max. 250V / 10A.
  • ★ 5V 8-channel relay module can be controlled directly with a microcontroller Raspberry Pi, Arduin, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic, etc..
  • ★ The relay acts as a switch that responds to a signal from the Arduin. Because of this, it is widely used in IoT projects to control lights and other electronic devices..
  • ★ Application: MCU control, PLC control, industrial area, smart home.If you need this relay, you can buy it directly. If there is a problem during use, you can contact us at any time to refund or replace it..
Check Stock

Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator

  • EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
  • DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
  • PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
  • PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
  • WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).
Check Stock

MUSYSIC Professional 2 Channel 9000 Watts DJ PA Power Amplifier Signal out MU-P9K

  • Stereo Output Power: "2x5600W PEAK, 2x2800W Program, 2x1400W RMS @ 2Ω" "2x2800W PEAK, 2x1400W Program, 2x700W RMS @ 4Ω" "2x1400W PEAK, 2x700W Program, 2x350W RMS @ 8Ω".
  • Bridge Output Power: "5600W PEAK, 2800W Program, 1400W RMS @ 4Ω" "2800W PEAK, 1400W Program, 700W RMS @ 8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) <0.23%20Hz-20KHz / Siew Rate >30V/us / Damping Factor >150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk >80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
  • Dual cooling fans / Connectors Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
  • Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..
Check Stock