Categories

Best Oil Pressure Switch Removal Tool

Diesel Fuel Filter for VW Golf Jetta TDI HENGST Made in Germany

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

Fuel Injector Return Line Kit - Fittings + Hose for VW Audi TDI 2.0L Diesel

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

5PCS Oxygen O2 Sensor Socket Wrench 22mm Removal Tool Thread Chaser Set

  • 【WHAT YOU GET】 1PC 1/2'' Drive x 27mm oil pressure sending unit socket. 1PC 1/2'' Drive x 29mm pressure/vacuum switch socket with slot. 1PC 1/2'' Drive x 7/8'' long sensor wrench socket with slot. 1PC 3/8'' Drive x 7/8'' vacuum switch socket with slot. 1PC 3/8'' Drive x7/8'' (6 point) vacuum switch socket with slot. 1PC 3/8'' Drive x 1-1/16'' & 1'' (6 point) oil pressure sending unit socket. 1PC 3/8'' DR x 7/8'' (6 point) short sensor wrench socket with slot..
  • 【FUNCTION】 Designed for the removal and installation of sensors, oil pressure sending units and vacuum switches equipped with wires or vacuum tubes on most vehicles. Provide additional leverage even in hard-to-reach places. We offers premium after-sales service and technical support to each customer..
  • 【FEATURES】 Constructed of high performance chrome vanadium for strength and durability. Finished with Black Oxide to avoid rust. Side cutout design allows easy access to from section and avoids from damage to wire..
  • 【PLUG AND PLAY】 Universal 6-point 7/8” (22mm) socket opening fits all hexagon sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • 【1 YEAR WARRANTY】 We provide 1 year warranty, support replace, return and refund service. We will random....
Check Stock

GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 41720

  • Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches.
  • Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units.
  • Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units.
  • Includes 3/8" Drive 1-1/16" Deep socket for Oil Pressure Sending units.
  • Includes 3/8" Drive 7/8" (22mm) Low Profile Offset socket for O2 Sensor Unit.
  • Includes 1/2" Drive 1-13/16" socket for Oil Sending Unit.
  • Includes 1/2" Drive 1-1/16" socket for Thermal Sensor units.
  • Durable blow mold case for safe storage and tool retention.
Check Stock

Metabo HPT Air Compressor, 4-Gallon, Electric, Twin Stack, Portable, Cast Iron, Oil Lubricated Pump, 135 PSI, 1-Year Warranty (EC99S)

  • MOTOR: 15 Amp direct drive induction motor for efficient and reliable performance.
  • PUMP: Cast iron, oil lubricated pump for cooler operation and greater longevity.
  • LIGHTWEIGHT: Only 52.9 lbs for easy jobsite transport.
  • REGULATOR: Locking regulator ensures the proper pressure is delivered to your tool.
  • GAUGES: Industrial air pressure gauges, encased in steel for higher durability.
  • PRESSURE SWITCH: 105 On/135 off pressure switch for less cycling.
  • FAST TOOL CHANGES: Universal quick coupler for fast tool changes.
  • EASY TANK DRAINING: Ball valve drain cock for quick and easy tank draining.
  • OVERLOAD PROTECTION: Motor thermal overload protection stops the motor in a possible overheating situation.
  • METABO HPT: Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
Check Stock

OEMTOOLS 25323 10” Master Oil Filter Locking Pliers, Universal Fit, Locking Grip, Heavy Duty Adjustable Wrench for Easy Oil Filter Removal

  • Adjustable Oil Filter Removal Tool: Jaw capacity to fit spin-on filters between 2 1/8 Inches to 4 1/2 inches or 55-120 millimeters.
  • Intelligently Designed: The design of locking pliers secures its grip on the oil filter, so you can focus entirely on applying pressure and torque to remove the filter.
  • Secure Grip: The machined jaw teeth of the locking pliers provide a sure grip and easy removal without damaging filters.
  • Unlock mechanism makes it easy to disengage.
  • Precise Application: Adjust and lock in the grip of the pliers to remove any margin for error during the oil filter removal process.
  • Built to Last: This heavy-duty oil filter adjustable wrench is made of high-quality steel.
Check Stock

JoyFans Oil Pressure Tester Tool, 0-140PSI Oil Pressure Gauge Kit for Fuel System Mechanical Sensor Engine Cylinder Compression Test with Hose Adapters for Cars ATVs Trucks Use Red Case

  • Fuel Injector Pump Pressure Check: Engine oil pressure test tool kit is designed to test oil pump pressure and check operation of fuel system components. Compare the measured pressure value to the standard reference range from manufacturer, we can take quick and accurate diagnosis and feasible solution on the oil pipeline leakage and engine wear, so as to confirm if the oil pressure gauge has been damaged. No more reliance on the dashboard light..
  • Oil Pressure Tester: The petrol engine cylinder tester kit has a shockproof rubber casing and a large clear dial with readings from 0~140 psi and 0~10 bar for easy and accurate work on both American and metric systems. Keeping the gauge safe from bumps and drops. Built-in hose assembly also comes with a side pressure relief button for instant pressure reset and no repeated hose disconnect, and 4 ft long flexible hose with convenient quick coupler for simple adapter installation and removal..
  • Durable Construction: 11-piece metal adapters are all made with heavy-duty forged steel and brass hardened for maximum strength and longevity.
  • designed to withstand extreme pressure in any situation for professional use. Each thread adapter marked with number, features black oxide finish to resist rust and corrosion.
Check Stock

aremnry 7pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set Vacuum Switch Socket Removal Installer Tool Kit

  • 【Applications】 Designed for the removal and installation of oxygen sensors, oil pressure sending units and vacuum switches equipped with wires or vacuum tubes..
  • 【Material Solid】 Heat treated chrome vanadium & chrome molybdenum steel (CR-V) with black oxide finish for corrosion resistance..
  • 【Including】7/8" Short low Profile O2 Oxygen Sensor Socket, 7/8" Universal Oxygen Sensor Socke 7/8" Universal Vacuum Switch PVS, TVS Socket Tool..
  • 【Function】 This set can work in the tight space around an O2 sensor to remove or install quickly and efficiently..
  • 【Easy Storage】Comes in a blow molded case for safe & easy transport and storage..
Check Stock

IPR Socket Tool Screen Kit - Compatible with Ford Powerstroke 6.0L Vehicles - F-250, F-350 Super Duty, Excursion, E-350 - Replaces 3C3Z9H529A, 904-415, 3C3Z-9H529-A, Injection Pressure Regulator

  • Replacement IPR Valve Seal Kit With Socket Tool - The injection pressure regulator valve regulates the oil bypass circuit of the high pressure oil pump. It is an electromagnetic valve that opens and closes to allow high pressure oil into the injectors. When the oil system gets contaminated by dirt or debris, the mesh filter of the IPR valve gets torned letting the debris get in and make the plunger mechanism inside to get stucked causing the vehicle to not build up pressure..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E350 Club Wagon | 2004 - 2010 E350 Super Duty | 2004 - 2010 E450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F250 Super Duty | 2003 - 2007 F350 Super Duty | 2003 - 2007 F450 Super Duty | 2003 - 2007 F550 Super Duty | 2003, 2004, 2005, 2006, 2007 F650 | 2003 - 2007 F750 |. The oil system usually gets contaminated when the oil cooler is serviced or replaced and has not been cleaned properly..
  • Replaces Part# 3C3Z9H529A, 904-415, 3C3Z-9H529-A, 904415 commonly found on popular models with the Diesel Powerstroke 6.0 engine including year models 04, 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically ....
Check Stock

8MILELAKE 21pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set

  • Ideal for the removal and installation of oxygen sensors, oil pressure sending units, oil pressure switches, vacuum switches equipped and thermal sensor switches.
  • Slotted design allows removing oxygen sensor with wiring harness attached and prevents damage to wires.
  • Heavy duty Forged sockets constructed from Chrome Vanadium alloy steel with black finish for lasting lifetime.
  • The perfect tool kit for the professional mechanic or DIY enthusiast..
  • All the tools are well organized in a blow molded case for easy transportation, simple storage, and quick identification..
Check Stock

Raincol O Ring Kit Rubber O Rings Assortment - 270 Pcs 18 Sizes for Automotive, Gasket Fuel Resistant Faucet Plumbing Assorted Sealing Washer, Piece Repair NBR, Removal Tool and Silicone Grease

  • ✔️O-RINGS: This set standard metric hydraulic sizes sae piece repair, NBR material and case professional, are used to join two parts of mechanical assembliesn. This kit O Rings assortment rubber 18 sizes, prevents particle, vapour and fluid leakage which in turn protects and maintains pressure whilst keeping debris out.
  • ✔️EXTRA BENEFIT: O Ring set contains a hook and pick removal tool to easily remove small sizes O-Rings and various seals and bushings and to access hard to reach areas. Removal tool perfect for removing O-rings for connections gas and for faucets gaskets heat removal tool washers. O Ring Rubber set contains a lubricant grease that is used for faucet, pressure control valve, water meter, bathroom utensils, sealing ring, and is safe for nitrite/rubber O-rings.
  • ✔️FEAUTURES: Universal O Ring buna kits, mechanic nitrile repairs, essential for all workshops and onsite service engineers. Range of 18 sizes Rings, no need to purchase individual O-Rings. Quick identification and easy storage for multiple O-Ring kit contains 270 pieces in 18 different sizes. O-rings have a high chemical and temperature resistance alongside a low compression set.
  • ✔️MATERIAL: Rubber O Rings, built of high-quality Nitrile Butadiene Rubber (NBR) materia....
Check Stock

Fuel Injector Removal Puller Kit Injector Seal Install Tool Compatible with Volkswagen TDi 4 Cyl 8V 16V Diesel Replacement for Audi VW 1.2 1.4 1.6 1.8 2.0 2.7 3.0 3.2 3.6 V6 4.2 V8 FSI TSI TFSI Petrol

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock