Best Oil Pressure Switch With Low Hysteresis

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • ...alls vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
  • 3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in tight spaces..
  • This set includes 1-1/16 and 1 in. oil Pressure sending unit socket, 3/8 in. drive, 1-3/16 in. Oil pressure sending unit socket, 1/2 in. drive, 1-1/16 in. thermal sensor switch socket, 1/2 in. drive. 7/8 in. heated oxygen sensor socket, 1/2 in. drive, 7/8 in. low profile offset oxygen sensor socket, 3/8 in. drive, 7/8 in. oxygen sensor socket, 3/8 in. drive, 7/8 in. universal vacuum PVS, TVS....
Check Stock

ACDelco GM Original Equipment 580-1091 Rear Air Lift Shock Absorber Kit

  • OPS REPLACEMENT OEM NUMBER: 12556117, 12559780, 12562230, 12569323, 12573107, 12614969, 12616646, 12677836, 8125622300, 8125731070, 8126166460,....
  • OPS COMPATIBILITY: Compatible with Chevy 2007-2008 Avalanche.
  • OPS INSPECTION: All engine oil pressure sending units are 100% tested using automated equipment, which activates the switch, checks for leaks and....
  • OPS FIX PROBLEM: Accurately measure the oil pressure value to turn off the low oil pressure warning light to protect the engine.
  • OPS WARRANTY: 1 Year. This oil pressure sensor sending unit really WORKS! Just in case you ever have an issue with it, our Customer Support team will....
Check Stock

SCITOO PS417 25070-CD00A Oil Pressure Sensor Switch Fit 2003-2009 for Nissan 350Z, 2005-2006 for Nissan Altima, 2005-2008 for Nissan Armada, 2004-2009 for Infiniti QX56 Oil Pressure Sending Unit

  • COMPATIBLE VEHICLES - Oil pressure sensor for 2004 2005 2006 2007 2008 2009 for Infiniti QX56, 2003 2004 2005 2006 2007 2008 2009 for Nissan 350Z, 2005 2006 for Nissan Altima, 2005 2006 2007 2008 for Nissan Armada, 2005 2006 2007 2008 2009 for Nissan Frontier, 2009 2010 for Nissan GT-R, 2004 2005 2006 2007 2008 2009 for Nissan Pathfinder, 2009 for Nissan Sentra, 2004 2005 2006 2007 2008 for Nissan Titan, 2005 2006 2007 2008 2009 for Nissan Xterra.
  • ADVANTAGES - The oil pressure switch is reliable in operation, extremely high in air pressure accuracy and long in working life. It effectively solve oil pressure gauge reading is not accurate, oil pressure switch engine light come on and low oil pressure problems..
  • PERFORMANCE - Engineered with high-quality materials to ensure trouble-free performance..
  • MATERIAL - Made of high quality & durable material that meets OE standard.100% new oil pressure sensor, not refurbished or re-manufactured parts..
  • GUARANTEE - One Year Warranty available for our this item.Please check picture, OE part number and fitment information to verify this is the correct one you need before your purchase..
Check Stock

Ehdis Manometer Gas Pressure Tester Digital Air Pressure Meter Differential Pressure Gauge HVAC Gas Pressure Tester

  • This digital handheld manometers can measure the air pressure of the single pipe, or differential pressure of two pipes.it is suitable for measuring of ventilation and air condition systems,and widely use forgas measurement,calibration,and any trouble shooting of any gas pressure systems..
  • Ultra-low-power sensing & measurement with 32-bit MCU and 24-bit ADC make the measurement of air press faster and more accurately.Perfect for working on tankless heaters,Very handy to set gas pressures on electric valves,Using for service testing of gas pressure on domestic boilers, Measures Air Flow about your bathroom fan ect..
  • 12 Selectable Units of Measure (kPa, Psi, Kgfcm2, Ozin2, Bar, mbar, inHg, mmHg, InH2O, FtH2O, cmH2O, Pa) with function: Data Hold and Error Code - Response Time: 0.5 Sec..
  • Ehdis digital manometer has Dual Input that can test / measure the differential gas pressure with its provided twin input probes.Max / minimum record function.
  • Data save function, also has room temperature future..
Check Stock

AC Current Switch SZC03-NC-AL-CH Adjustable Current Sensing Switch for Fflash Buzzer Relay and Single-Chip AC 0.5-200A

  • HIGH QUALITY: The shell of current sensing switch is made of self-extinguishing ABS material for long lifespan, durable and safe to use. It has traight-through structure design, isolation withstand voltage up to 2000V, powerful and reliable. Hysteresis is less than 1% and can be used under strong magnetic conditions..
  • GOOD PERFORMANCE: The switch can open and close without limitation, and the reaction speed reaches the ms level, quick response and low power consumption..
  • ADJUSTABLE: This adjustable switch with a potentiometer is self-powered, no external power supply required. Action current 0.5-200A AC..
  • WIDE APPLICATION: The switch is widely used for monitoring current in substations, variable frequency speed control devices, inverter devices and other electric equipment..
  • CONVENIENT: The high-power MOS tube contactless electronic switch is equipped with LED indicator which can conveniently and intuitively indicate the working status of the switch..
Check Stock

Manometer Digital Gas Pressure Tester Differential Pressure Gauge HVAC Air Pressure Meter with Backlight Data Record Function

  • ✅【High Accuracy】Measurement range: ±2.000psi.
  • ✅【12 Selectable Units】Easily toggle between Psi, kPa, Pa, Kgfcm2, ozin2, Bar, mbar, inHg, mmHg, inH2O, ftH2O and cmH2O.
  • ✅【Data Record】This Manometer would be record 99pcs data with time stamp, which help to easier to analyze the data.
  • ✅【Multi-Functional】Measuring Differential pressure, Positive and Negative Pressure, Data Hold, MAX/MIN/Average, Large LCD backlight, Low battery Alarm, Auto Power Off Functions.
  • ✅【Wide Applications】This high-quality manometer is suitable for gas measurement systems, which measuring the air and ventilation system, calibrating and trouble shooting of gas pressure systems, HVAC, gas appliance repair and installation, laboratory testing, etc..
Check Stock

Benefast VTEC Solenoid Spool Valve w/Timing Oil Pressure Switch & Gasket Compatible with Honda Accord CR-V Element Civic Acura RSX Acura TSX Replacement# 15810-RAA-A01 15810-RAA-A03

  • The VTEC (Variable Valve Timing and Lift Electronic Control) system increases the amount of intake valve lift for increased power. It accomplishes this by turning a control solenoid 'ON' to allow oil pressure into the VTEC control passages to apply pins that will lock the intake rockers. When the oil pressure is present, the pressure switch signal will go high. When the control solenoid is turned 'OFF', the oil pressure is dumped and the oil pressure switch signal will go low..
  • If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a 'fuel-cut' mode limiting engine rpm and performance. The PCM simply doesn't 'know' what the state of the intake valves are, so you end up with the symptoms you describe..
  • This VTEC Solenoid Fits for the Following Vehicles: Honda Accord 2003-2007, Honda Civic 2002-2005, Honda CR-V 2002-2009, Honda Element 2003-2011, Acura RDX 2002-2012, RSX 2002-2006, Acura TSX 2004 2005 2006 2007 2008..
  • Customers can find the product you need accurately according to the OE number. Replacement part number: 15810-RAA-A01, 15810-RAA-A02, 15810-RAA-A03, 15810-PNE-G01, 917-224, 917224, 15810RAAA01, 15810RAAA03, 15810RAAA02, 15810PNEG01..
Check Stock

Engine Dancer Transmission Oil Pressure Sensor Switch 28610-RKE-004 Compatible with 1998-2009 Acura and Honda - MDX RDX RL TL Accord CR-V Odyssey Pilot Ridgeline

  • 【Quality Transmission 3rd GEAR Oil Pressure Sensor Switch】Responsive, Resolve Engine Light On Problem Efficiently and Promote car power. perfectly match the original model, and easy to install..
  • 【Fits These Vehicles】Fit for Acura - 2001-2009 MDX | 2007-2009 RDX | 2005-2008 RL | 1999-2008 TL | Honda - 1998-2007 Accord | 2002-2004 CR-V | 1999-2007 Odyssey | 2005-2008 Pilot | 2006-2008 Ridgeline..
  • 【Replace Part Number】28610-RKE-004,28610RKE004. Symptoms of A Bad or Failing Pressure Switch, Such as: 1. The oil pressure warning light is on, the oil pressure light blinks constantly, the engine fault light is on.
  • 2. The ECU system detects the fault code of the transmission switch voltage being too high or too low.
  • 3. Affects the power of the vehicle, causing high fuel consumption, difficult shifting, engine jitter, and unstable idle speed..
  • 【OE Fit, Form, Function】100% Brand New, and High Quality OE style, Meet and exceed the original part. High quality material to ensure durable, long service life. Aftermarket product, directly fit your vehicle manufactured According to OEM specifications..
  • 【Premium Quality】Please confirm your car model and the Original part before purchasing to avoid buying the wrong. If you have other questions, please co....
Check Stock

SCHNECKE 5S7247-AA Engine Coolant Temperature Sensor

  • Check the Amazon Parts Finder to see if this parts fit your vehicle and check the descroption also to see the detail fitment info.
  • Innovative engineering, manufacturing technology and quality control ensure that SCHNECKE Engine Oil Pressure Switch meet or exceed the performance of the original equipment they replace. Every unit is designed to OE fit, form and function requirements accomplished by leveraging SCHNECKE's OE expertise.
  • SCHNECKE offers complete Engine Oil Pressure Switch coverage for Asian, Domestic and European vehicles, top brand awareness and unsurpassed quality.
  • SCHNECKE warrants its Engine Oil Pressure Switch for a period of One years from the date of purchase. Within this period, we will replace any Engine Oil Pressure Switch shown to be defective in material or workmanship.Designed to provide a perfect fit for a hassle free installation, this reliable product can help you get you vehicle back on the road faster and easier..
Check Stock

Digital EGT Gauge with 2 Alarm Outputs and EGT Sensors Combo Kit in Fahrenheit or Celsius (12V)

  • Service: DPGAB: Air and compatible gases.
  • Accuracy: ±0.5% F.S. (includes linearity, hysteresis, repeatability)..
  • Pressure Limits: 2X pressure range. Vacuum range max. pressure is 30 psig..
  • Power Requirements: 9 V alkaline battery, included, user replaceable..
Check Stock

Jabsco Flexible Impeller Ac Motor Pump Units - Type: Service Kits - Type: for Model 6050-00

  • Replacement switch fits Little Giant CVCMA-20ULST & VCMA Series, PartsConnect PCP115, Wayne Reliant 189246, Beckett CB series, Liberty Pumps LCU series, Diversitech CP seriies, Sid Harvey 397-112, and other condensate pumps.
  • Replace Zing Ear G606 or Crouzet 83133169 switch.
  • Includes instructions, help, and hints on how to replace your pump switch. Warranty: 3 years replacement..
  • Single Pole, on/off latching switch. Push the lever down with half an ounce of force, and it turns on. Up for off. Latching microswitch with just the right amount of overshoot (hysteresis) for the float in your condensate pump.
  • Please don't be stupid: TURN OFF ALL ELECTRICITY AND DISCONNECT ALL POWER BEFORE YOU FOOL WITH YOUR CONDENSATE PUMP!.
Check Stock

Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator

  • EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
  • DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
  • PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
  • PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
  • WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).
Check Stock