Categories

Best Oil Pump Drive Gear

Moroso 63841 Alternator Drive Kit

  • Big Block Chevy with Electric Water Pump This Alternator Drive Kit is crank-mounted and designed with spacers that can be replaced with pulleys to drive other accessories such as external oil and vacuum pumps. Note: Use Moroso 710-97170 Gilmer Drive Pulley if external oil pump is used..
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 3:1 Fast Flow Rate 7.4gpm / 28lpm for SAE130 Oils/Fluids

  • PUMP SPECS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 7.4GPM / 28LPM.
  • A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
  • An Air Motor Effective Dia. of 63mm 2.5" inch.
  • An Air Consumption (per minute) at 8BAR / 140L at 115PSI / 5.0CFM.
  • Air Inlet Connection of 1/4" inch and Oil Outlet Connection of 3/4" inch Male.
  • A Long Pump Life of 840k Liters / 221k+ Gallons.
  • EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
  • This Smart design uses fewer parts for less pump wear and tear, making it is easy to use and maintain.
  • This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE130 grade oil.
  • PROPER USE and SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper add....
Check Stock

E-cowlboy Injection Pump Gear Puller & Engine Barring/Rotating Tool for Cummins Engine VE P7100 VP44 4BT 6BT Diesel, B/C Series Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesel

  • Great Compatibility — Injection Pump Gear Puller for Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT and Engine Barring/Rotating Tool for Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
  • Fitment — This Gear Puller fits for any 1989-2002 Dodge Ram Cummins Injection Pump Gear.
  • Easier Work — Injection Pump Gear Puller: used to remove the injection pump gear with ease and fast. With this tool, you will have no issues pulling the Injection Pump gear. Engine Barring/Rotating Tool: just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
  • Superior Quality — Advanced high strength and toughness carbon steel structure with black finished, stong and durable, anti-deformation and anti-corrosion. High precision and hardness and a much longer service life..
  • Package Include — 1* Compressor Plate 2* bolts &1* Engine Barring Tool.
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 1:1 Fast High Flow Rate 8.5GPM / 32LPM for SAE130 Oils/Fluids

  • SPECIFICATIONS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 8.5GPM / 32LPM.
  • A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
  • A Max Fluid Pressure of 8BAR / 115PSI. An Air Motor Effective Diameter of 63mm 2.5" inch.
  • An Air Consumption (per minute) @ 8BAR / 130L @ 115PSI / 4.7CFM.
  • An Air Inlet Connection of 1/4" and Oil Outlet Connection of 3/4" Male.
  • A Long Pump Life of 960k Liters / 253k+ Gallons.
  • EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
  • This Smart design uses fewer parts for less pump wear/tear, making it is easy to use/maintain This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE80 grade oil.
  • PROPER USE & SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall-mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper additional equi....
Check Stock

Yoursme Injection Pump Gear Puller Removal Installer Tool & Engine Barring/Rotating Tool for Cummins and Dodge Engines

  • APPLICATION: Injection Pump Gear Puller works on Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT. Engine Barring/Rotating Tool works on Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
  • SUPER MATERIOR: Made from high standard 42CrMo steel with Black Finish, resisting rust and impact, Great Strength and Durability, ensures reliable long-term service..
  • USE INSTRUCTION： Injection Pump Gear Puller--Used to remove the injection pump gear with ease and fast. Engine Barring/Rotating Tool--Just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
  • PACKAGE INCLUDE: 1PC Injection Pump Gear Puller with two heavy duty flange bolts.
  • Satisfaction Guarantee: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days. We support 12 months’ Warranty. If you have any problems about our products, please feel free to contact us..
Check Stock

Sealed Power 224-51198 Oil Pump Repair Kit

  • Adjustable Size: This oil pump cap cover has large adjustment range which is suitable for different oil pump caps.185mm maximum diameter, 135mm minimum diameter..
  • This tool is ideal for removing 5 & 7 hole fuel tank lids.Bending foot type with radian design, more suitable for the installation surface of oil pump cover, to ensure that the operation is not easy to slip..
  • A Must Have Tool: This fuel sender tank lock ring tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings..
  • Intended Use: This fuel pump removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. （use with a 1/2" drive ratchet or breaker bar）.
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank.(Check the size before buy).
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
  • Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
  • Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....
Check Stock

OEMTOOLS 24938 9.5L Pneumatic/Manual Fluid Extractor, Manual and Pneumatic Oil Extractor, Fluid Vacuum Extractor, Vacuum Evacuator

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump.
  • Double Duty: For pneumatic extraction, insert the suction hose in the vacuum extractor pump receiving hole.
  • Manually suction fluid with the engine oil pump's oversized handle.
  • Don’t Cry Over Spilled Oil: The 9.5-gallon reservoir is a solid one-piece tank that can't leak out the bottom.
  • The built-in shutoff prevents overfilling the extractor pump reservoir.
  • Time Flies: Draining oil from beneath a vehicle takes eons.
  • The fluid pump's 5ft hose and dipstick adapter extracts automotive fluid directly from the dipstick tube.
  • Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
  • This fluid extractor pump works at 85 PSI and a max pressure of 120 PSI.
Check Stock

HGV TOOLS/ Drive Gear Puller Plate Tool ALT JDG1560,JDG670A Compatible with John Deere

  • This tool is used to remove the drive gear from the DB2, DB4 and DE10 fuel injection pump drive shaft, to allow removal of the pump..
Check Stock

MOFANS 16 Teeth Crankshaft Assembly Fit for Compatible with Scooter ATV GY6 QMB139 4 Stroke Engines 50cc-80cc

  • FitmentFit for Compatible with Scooter ATV 50cc 60cc 80cc 4 Stroke GY6 QMB139 Engines..
  • Specification16 teeth Oil pump drive gear.
  • FeatureHigh sensitivity, stable performance and high reliability..
  • MaterialMade of high-quality aluminum alloy material, superior craftsmanship and durability, anti-rust, anti-corrosion..
  • Easy to installInstructions NOT included. Professional installation is highly recommended.
Check Stock

Funny 92nd Birthday Gift T-Shirt - 92 Year Old Cards Shirt

  • Gear lube pump and a quart of High Performance gear lube conveniently packaged together.
  • Use the pump to replace your gear case oil with ease.
  • May be used with any sterndrive and outboard which uses a 3/8"-16 drain/fill screw.
Check Stock

Du-Bro 911 Kwik Fill Fuel Pump

  • Reversible Gear Pump design. Works from 6V to 12V.
  • FILL-OFF-EMPTY 3 position switch and pre-installed alligator clips.
  • Length: 3-3/4" (95mm) Width: 1-3/8" (34mm) Height: 1" (25mm) Pump capacity 33 ounces per minute at 12V.
Check Stock

HALF OFF PONDS Pond Pulse 4,200 GPH Hybrid Drive Submersible Pump for Ponds, Water Gardens and Pond Free Waterfalls w/ 30' Power Cord - PP-4200

  • PERFORMANCE BEYOND IT'S PRICE - High flow, energy efficient hybrid drive technology combines the high flow characteristics of a direct drive pump with the energy saving efficiency of a mag drive pump..
  • SMART DESIGN FOR SMALL SPACES - Upright design with space-saving footprint makes this pump ideal for skimmer and pondless waterfall installations with an intake-screen that prevents clogging..
  • FLEXIBILTY FOR YOUR POND - Asynchronous drive motor can be controlled with variable speed controller (not included) that permits you to increase or decrease pump flow as needed..
  • BUILT TO LAST - Engineered for 24-hour continuous use, while a heat-overload sensor prevents a burnout.
  • completely safe for fish, wildlife and aquatic plants. **Backed by a 2-year manufacturer's warranty!** With 100% U.S. Based Support and Service!.
Check Stock