Categories

Best Oil Resistant Wire

Gates 24703 Fuel Filler Hose 1.5 IN (38mm) X 1.5 FT

  • Smooth oil resistant modified nitrile cover, tough synthetic knit textile cord reinforcement and petroleum-resistant nitrile tube.
  • Offered in bent formed configurations and straight.
  • Meets SAE 30R6 or 30R7 (except oxidized gasoline test).
  • Meets SAE 30R5 - Wall thickness is 4.47±1.42mm (0.176±0.056 inch) excluding embedded wire area.
Check Stock

Engineer Inc PA-20 Precise Universal Wire Terminal Crimping Tool

  • strips both stranded copper wire AWG24~AWG12 (SWG25~SWG13) & solid copper wire AWG22~AWG10 (SWG23~SWG12).
  • exceptionally sharp & precise carbon steel jaws.
  • clean edge to the insulation strip, with no damage to the copper conductor wires (unlike most automatic wire strippers).
  • spring loaded for easy operation (handles latch shut for storage)..
  • oil-resistant TPR (thermoplastic rubber) grips for unmatched comfort.
Check Stock

LAOA Insulated Needle Nose Pliers Electrician's Pliers Long Needle Nose Pliers for Wire Stripping,Cutting Wire,Screwing Nails, Cutting,Clamping,Multifunctional Hand Tools

  • Multifunctional Needle Nose Pliers is forged with 60CR-V steel, and the heat treatment of the cutting edge reaches HRC58±2°, with high hardness..
  • The handle of the insulated electrician's pliers is made of high-voltage resistant and flame-resistant materials, which meet the safety range of high-voltage resistance of IEC60900, which is safe and efficient..
  • stripping range: 1.2, 2.0, 3.0, 5.0mm²/AWG16, 14, 12, 10..
  • Multi-functional insulating electrician's pliers are mainly used for cutting iron wire/tightening iron nails/steel wire cutting and clamping, wire stripping, etc..
  • The two ends of the pliers are water-milled, and the surface is treated with dry oil for anti-rust, which is not easy to rust and can be used for a long time..
Check Stock

Swpeet 4Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves,10 Inch Welding Chipping Hammer with Steel Coil Spring Handle for Cleaning Removing Slag

  • ...Gloves, In total 4Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
  • ☛ 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off..
  • ☛ 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience..
  • ☛ 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb the shock of contact while cleaning and shipping way welding debris. Tempered chisel on one end and point on the other.1-1/16" width chisel to remove welding slag faster..
Check Stock

ZhiYo 50FT 3/8” Wire Loom Split Tubing Auto Wire Conduit Flexible Cover | High Temperature Heat Resistant -40F to 257F | Plastic Cover for Electrical Wires & Cables

  • More High Operation Temperature Range: -40 to 257 | It is more high-quality and safer than other products with a lower operating temperature range. Great wire tubing for automotive, marine, industrial, office, home….
  • High quality material and high operating range flex tubing will protect your wires from oil or heat or a chewing-like pet..
  • High Quality Polyethylene Material: with newly high tech to heighten density, our wire protector tubing is thermostable and inflaming retarding!.
  • Protect Your Wires: resistant to abrasion, corrosion, gasoline, oil, and other harmful chemicals. This split loom tubing is perfect for indoor or outdoor wire cover..
  • Easy Installation: With side-cut corrugated wire loom tubing is much easier to use. Great plastic cover for electrical wires and cables..
Check Stock

ZhiYo 20FT 1/4” Wire Loom Split Tubing Auto Wire Conduit Flexible Cover | High Temperature Heat Resistant -40F to 257F | Plastic Cover for Electrical Wires & Cables, White

  • More High Operation Temperature Range: -40 to 257 | It is more high-quality and safer than other products with a lower operating temperature range. Great wire tubing for automotive, marine, industrial, office, home….
  • High quality material and high operating range flex tubing will protect your wires from oil or heat or a chewing-like pet..
  • High Quality Polyethylene Material: with newly high tech to heighten density, our wire protector tubing is thermostable and inflaming retarding!.
  • Protect Your Wires: resistant to abrasion, corrosion, gasoline, oil, and other harmful chemicals. This split loom tubing is perfect for indoor or outdoor wire cover..
  • Easy Installation: With side-cut corrugated wire loom tubing is much easier to use. Great plastic cover for electrical wires and cables..
Check Stock

Gardner Bender 42-029 Pocket Wire Marker Booklet

  • ALL YOU NEED: Printed with consecutive numbers '1-45' (10 of each). Matching terminal marker with every wire marker and terminal markers for special legends..
  • DURABLE DESIGN: Nylon-impregnated cloth to resist the tough environments electrical wires are required to withstand, suitable for identification on large and small gauge electrical wires, tubing in automotive applications and various cables.
  • HIGH VISIBILITY: Legends assure high visibility for instant, positive identification.
  • SAVE TIME AND MONEY: During all on-site and in-plant initial hookup, troubleshooting, maintenance and repair electrical wire work.
  • ENVIRONMENT RESISTANT: Moisture, oil and smudge resistant with a self-adhesive backing that ensures a firm, lasting adhesion.
Check Stock

ZhiYo 100 FT 1/4” Wire Loom Split Tubing Auto Wire Conduit Flexible Cover

  • More High Operation Temperature Range: -40 to 257 | It is more high-quality and safer than other products with a lower operating temperature range.....
  • High quality material and high operating range flex tubing will protect your wires from oil or heat or a chewing-like pet..
  • High Quality Polyethylene Material: with newly high tech to heighten density, our wire protector tubing is thermostable and inflaming retarding!.
  • Protect Your Wires: resistant to abrasion, corrosion, gasoline, oil, and other harmful chemicals. This split loom tubing is perfect for indoor or....
  • Easy Installation: With side-cut corrugated wire loom tubing is much easier to use. Great plastic cover for electrical wires and cables..
Check Stock

Green THHN Wire | 10 AWG - 50 Feet | Solid Copper Grounding Wire, Proudly Made in America | Ground Protection Satellite Dish Off-Air TV Signal - UV Jacketed Antenna Electrical Shock

  • INCLUDES: 50 feet of Solid Copper - Green Jacket THHN / Building Wire / Grounding Wire.
  • FUNCTION: Works well for a variety of home and workspace applications, and provides a flexible solution for long installation runs.
  • QUALITY: Insulation is high heat and moisture resistant - 10 AWG THHN PVC jacket - Indoor and Outdoor rated (600 V and 90 C/194 F).
  • EQUIPMENT ADAPTABILITY: Approved for major CATV and satellite providers including Comcast (Xfinity) DirecTV, Dish Network, Charter, Spectrum, Cox Cable TV & Verizon FIOS.
  • QUALITY ASSURANCE: UL Listed and CSA certified - and Proudly manufactured in the the United States | Includes a US manufacturers warrantyDescriptionb>Introducing the Indoor / Outdoor UV jacketed Copper THHN Wire by The CIMPLE CO.
  • This high quality and heavy duty electrical wire can be used in conjunction with other grounding supplies to protect against lighting strikes and power surges. The center conductor is made of high grade Solid Copper (SC). The use of solid-copper allows for very low voltage drop along the center conductor over long runs, and offer great grounding properties. Multi-Purpose building wire is a great wire, that has many uses - including cable trays, conduit, servcie, feeders, and branches. Works in Industrial, Commercia....
Check Stock

Swpeet 5Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves, 8 Inch Welding Plier and 10 Inch Welding Chipping Hammer with Steel Coil Spring Handle

  • ... plier, In total 5Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
  • ☛ 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off..
  • ☛ 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience..
  • ☛ 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb the shock of contact while cleaning and shipping way welding debris. Tempered chisel on one end and point on the other.1-1/16" width chisel to remove welding slag faster..
Check Stock

Brady BM71-187-1-342 Bulk BMP71 PermaSleeve Wire Marker Sleeves, 0.335\ Height, 1.015\ Width, Polyolefin (B-342) White (Roll of 1000)

  • 3:1 heat-shrinking wire sleeve is ideal for labeling in harsh environments and is resistant to chemicals, grease, oil and cleaning agents.
  • Polyolefin wire marking sleeves have a smudge-proof finish and print in black text on a white background.
  • PermaSleeve labels provide wire identification that combines speed, ease of use and permanence for long-lasting, high quality identification.
  • Cold resistant and flame-retardant with an operating temperature of -67° F to 275° F (-55° C to 135° C).
  • For use with BMP61 Label Printer, BMP71 Label Printer, BradyPrinter M611 Mobile Label Printer, TLS 2200 Thermal Labeling System, TLS-PC LINK Thermal Labeling System.
Check Stock

Clear Power 100 ft 12/3 SJTOW Extra Heavy Duty Contractor Grade Extension Cord with 5 Outlet Adapter Combo, Oil Water & Weather Resistant, Flame Retardant, Yellow, 3 Prong Grounded Plug, CPCO90001

  • All Purpose Extension Cord + Matching 5 Plug Outlet Set: Easily turns single outlet extension cord into 5 outlet extension cord, replaces bulky adaptor plugs to save space and keep extension cords organized.
  • Safe: Vinyl wire cover protects SJTOW wire from wear and tear and is oil resistant, corrosion resistant, water resistant, as well as flame retardant. This extension cord is also built in 15 amp resettable circuit breaker which protects it from overloading.
  • Made Durable for Extreme Weather Resistance: made for extreme temperatures from -58ºF up to 221ºF, wire remains flexible even in extreme cold conditions.
  • Lighted Socket: LED light indicates when power is on.
  • Tested and Certified to USA and Canadian standards.
Check Stock

50 Ft Extension Cord with 3 Electrical Power Outlets - 14/3 SJTOW Heavy Duty Black Cable

  • DESIGNED FOR RUGGED USE - Water, oil, and flame resistant. Flexible in cold temperatures..
  • HEAVY DUTY STRAIN RELIEF for optimal performance. 3 prong grounded plug for added safety..
  • REINFORCED BLADES protect prongs from bending or breaking. Oil resistant for farm and industrial use..
  • LIFETIME REPLACEMENT WARRANTY - Iron Forge Cable stands behind all of extension cords 100%. If anything ever goes wrong with this, we will replace it with a new item. UL Listed 3 wire extension cord, 50 foot, 15 amp, 125 volt, 1875 watt, 5-15P/R.
Check Stock