Categories

Best Oil Sealing Plug Valve

3/4\ Ball Valve, 1 Pack Male NPT (MNPT) X Female NPT (FNPT) Thread,Stainless Steel Shut-Off Valve for Water,Oil and Gas (3/4 inch, 1 pack)

  • Ball Valve：Male NPT (MNPT) X Female NPT (FNPT) screw thread connections,1,000 WOG (PSI) full port heavy duty ball valve is made of 304 stainless steel,safer and stronger,anti-corrosion,long lifetime..
  • Good Sealing：KAPUNOS ball valve has two sealing surfaces with good sealing performance,it can achieve complete sealing..
  • Convenient Operation：KAPUNOS high pressure ball valve has a comfortable operating handle,which opens and closes quickly,It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Widely Used：Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
  • Suitable for Media：The high-quality 304 stainless steel ball valve is suitable for water, sea water, air, oil and steam media.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
Check Stock

Electric Solenoid Air Valve G1/8 Vacuum Solenoid Valve Sealing Reduce Wear Resistamt Copper Coil for Industrial Use

  • COPPER FULL TURN COIL: Solenoid valve for a time use is not easy to hot, possess durable life, more durable than ordinary solenoid valve.
  • WEAR RESISTANT: Between solenoid valve internal moving parts has excellent softening oil, effectively reduce wear between parts.
  • RELIABLE SEALING: Solenoid valve using excellent sealing , to ensure that the product performance is stable and reliable, lasting.
  • WIDE APPLICATION: Used for rail transport, vehicle manufacturing, ship engineering, mechanochemistry, mining equipment, biomedicine.
  • AVIATION CAST ALUMINUM VALVE BODY: Die cast aluminum valve body with solid material, the is finely polished, the inner wall is also polished several times, to ensure that the interface is without burr and no air leakage.
Check Stock

Tektall LS Finned Cast Aluminum Valve Covers with Coil Mounts and Covers Compatible with Che-vy Small Block SB V8 293 325 376 427, Black

  • 【Top Quality】 Made of Highly durable Cast Aluminum . High sealing performance gasket and silicone sealant to stop the oil leak. Precisely engineered make your car run powerfully and stably..
  • 【Fitment】 Fits for Chev-rolet small block V8 gen. III/IV (LS BASED) 4.8 5.3 5.7 6.0 6.2 7.0.
  • 【Function】 Cast aluminum valve covers are a great way to improve the look of your LS engine, without any radical changes to its configuration. Accepts Gen 1 (Delco D580) and Gen 5 (Delco D510C/ TSP 81015) LS style ignition coils..
  • 【Features】 The base has a tall internal height to allow for added valvetrain clearance and no brackets required. It also features a baffled stock-style ventilation set-up. The coil cover features cut-outs for routing the wiring harness and spark plug wires and comes with a classic, finned top..
  • 【Package includes】 Coil Cover Mounting Hardware, Coil Hardware & Spacers, Low-Profile Oil Fill Caps and Valve Cover Gaskets.
Check Stock

Engine Valve Cover Gasket Seal 12341-PR3-000 Engine Valve Cover Gasket Set for Honda DOHC VTEC B-Series B16 B17 B18 12341PR3000

  • 【Compatibility】: This product is compatible with for Acura Integra GSR/Type R 92-01, for Honda Civic Si 99-00/for Honda Del Sol (DOHC VTEC) 94-97.Reference part number is 12341-PR3-000, 12341PR3000..
  • 【ACM material】: The sealing ring is made of ACM rubber, which has good heat resistance, aging resistance and oil resistance, and provides better protection for your automotive valve room..
  • 【Leakproof protection】: The sealing ring can directly replace the damaged valve gasket to prevent oil leakage, air leakage and protect the air intake of the vehicle. High precision, good sealing performance and long service life..
  • 【Easy to install】: The sealing ring is easy to install and can be used after installation, which perfectly matches the original car. Original standard, perfect replacement for old or damaged parts..
  • 【After-sales service】: If you have any questions about this product, please contact us, our professional after-sales team will answer your questions within 24 hours..
Check Stock

X AUTOHAUX VS50807R Valve Cover Gasket Set for Chevrolet Cruze Sonic Trax 1.4L L4 2013-2020 for Buick Encore for Cadillac ELR VS50710 55573747

  • for Buick Encore Preferred Essence 2WD AWD 2017-2020.
  • Replace part number:VS50807R VS50710 55573747.Please double check the part number of your own one..
  • Material:Made of durable rubber material, sealing, oil resistance, wear resistant,high temperature resistance, corrosion resistance, long service life, effectively prevent engine oil leakage into the valve mechanism..
  • Function:The purpose of the valve cover gaskets is to seal the cylinder to ensure no leakage of coolant or oil into the cylinder. Head gaskets prevent leakage of liquid and gas into adjacent cylinders and surrounding coolant galleries..
  • Replacement:If your valve cover leaks, your oil is always low, or you smell burning oil, you will need to replace the valve cover gasket..
Check Stock

Boltigen R134A Can Tap, R134A Self-Sealing and Puncture Style Refrigerant Can Tap Valves with Refrigerant Tank Adapters for Refilling Automotive Air Conditioning Systems

  • You Will Receive: 1pc R134a self sealing can tap, 1pc R134a non self sealing can tap, 1 pc 6014 vacuum pump adapter 1/4 Flare Female to 1/2 Male, 1 pc 6015 R134A refrigerant tank adapter 1/2 Female to 1/4 Male Flare and 1 pc valve core remover, 5 pcs in total, valuable and practical kits of R134a can tap that meet your connectivity needs and provide convenience in your daily life..
  • R134A CAN TAP: the R134a can taps are made of quality brass material, which has good durability and anti-rust, can deal with most extreme conditions, T handle for easy fingertip control, thickening seals to prevent leaking..
  • REFRIGERANT ADAPTER: the vacuum pump adapter features quick and easy connection and disconnection with high flow, you can just hand tighten the vacuum pump adapter and get a good sealing, suitable for charging and service tools, such as vacuum pump, can tap or oil injector to adapt between R12, R22 system and R134a systems..
  • Wide Compatibility: Our R134a self sealing can tap valve refrigerant dispenser and non-self sealing can tap valve with 1/2 female thread to compatible with 1/4" SAE (R12 R22) female fitting AC charging hose, and it comes with R134A can tap refrigerant dispenser and tank adapter, compatible with both 1/4" and 1/2" female fittings ac....
Check Stock

6-Pack Valve Stem Extenders, Mellbree 45 Degree 90 Degree 135 Degree Schrader Tire Valve Extension Compatible for Dual Wheels Passenger Cars, RV, Stroller, Bicycles, Motorcycles and Trailers

  • ...bility to pump or check air pressure due to insufficient space between the valve and the spokes, or the inconvenient position and angle of the valve. Due to the built-in valve core, they can allow inflation and deflation, which is convenient and quick. Be sure to tighten the thread when using it, otherwise the best sealing effect cannot be achieved..
  • The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient..
  • Prevent air leakage! 1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage. 2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum. 3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover..
  • Our valve core adapters are equipped with rubber sealing rings and sealing caps to ensure air tightness withou....
Check Stock

Genuine OEM Toyota Oil Filter 90915-YZZD3 (4PK) with DIINGO Plug Oil Drain Gasket 90430-12031 (4PK) Fit for 4Runner FJ Cruiser Land Cruiser Sequoia Tacoma Tundra

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

BOXI Left Side Radiator Side Engine Valve Cover w/Gasket fits for Nissan 350Z Infiniti FX35 G35 M35 2003 2004 2005 2006 2007 2008 VQ35DE 3.5L V6 Engine (Replaces # 13264-AM610 13270-8J112)

  • Fitment: Compatible with VQ35DE 3.5L V6 Engine / Motor.
  • Replaces number: 13264-AM610,13270-8J112.
  • Among the most important parts of any engine is the oil that is contained within it. There are a variety of moving parts that depend on the oil for lubrication. The valve cover goes on top of the engine and is designed to keep the oil from leaking out. Underneath the valve cover, there is a gasket that helps to add additional sealing. Without a functional valve cover gasket, it will be very hard for you to keep your engine oil where it belongs..
  • Notes:Please check the OEM Number before purchase. This is the best way to confirm the fitment. Instruction is not included. Professional installation is recommended.
Check Stock

1pc 2inch Sampling Valve Ferrule Sanitary Stainless Steel Valve Quick Sampling Rubber Diaphragm

  • 【High Quality Material】The sampling valve is made of high-quality SUS304 stainless steel, chemically stable, durable and anti-rust.
  • 【Food Grade】During the sampling process, our food grade hygienic sealing rubber ring and smooth inner wall can ensure that the medium is pollution-free and the sampling is convenient.
  • 【Precision Construction】The sampling valve consists of a simple valve, a handle and a diaphragm. The rubber diaphragm on the valve stem is used as a tension plug when obtaining a sample of the medium in the pipeline or equipment, which is convenient to use.
  • 【Widely Used】Our grab valve is suitable for industrial fields of dairy products, cosmetics, food, pharmacy, beer, chemical, petroleum, metallurgy, water heating, food, pharmaceutical, etc..
  • 【Specifications】Surface Finishing: Mirror polish--Pressure: Normal pressure--Connection Type: Fast clamp connection--Ferrule Size: 50.5mm/2in.
Check Stock

Mamiko 04152-YZZA1 Oil Filter Kit (3Pcs) and 90430-12031 Oil Drain Plug Gaskets (10 Pcs) Compatible with Toyota Avalon Camry RAV4 Sienna Lexus ES300h ES350 IS200t RX350 RX450h Replacement

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...i, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
  • The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valv....
Check Stock

ONER Driver Side Valve Cover with Gasket & Bolts Compatible with 1999-2008 Cadillac Escalade, Chevy Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon，Replace# 12570427 264-965

  • ...g Oil, And In Some Serious Cases, It Can Even Cause A Fire If Enough Oil Gets Onto The Exhaust System. Finding Out And Replacing It As Soon As Possible Will Help Your Car Drive With High Performance And Safety!.
  • 【Advantage】-Long Service Life, VALVE COVER Is Made Of High-Quality Aluminum Material And High-Quality Sealing Rubber，Designed And Manufactured According To OEM， And The VALVE COVER Are Tested Before Leaving The Factory To Ensure That The Product Quality Meets The Standards.The Price Is Only A Small Part Of The Dealer!.
  • 【After-Sales Service】- Establish Strict Quality Control Standards, 1 Year Warranty, Worry-free Return And Refund Policy, Buy With Confidence!If You Have Any Questions About Valve Cover, Please Contact Us, We Will Help You Deal With It As Soon As Possible！.
Check Stock