Categories

Best Oled Display Module

LCD Character Display Modules & Accessories FSTN (-) Transm 80.0 x 36.0

  • MAIN FUNCTION: OLED is the newest display technology in market now, it can emitting light by itself, no back-light needed.
  • EASY TO USE: The commands sending to products are easy to remember and understand and with it's four square holes they are easy to install..
  • MORE PRACTICAL: In low ambient light conditions such as a dark room, an OLED screen can achieve a higher contrast ratio than an LCD..
  • FASTER RESPONSE: OLED display module has a much faster response time than an LCD which can improve your using efficiency..
  • MULTIPLE USAGE: The display with small dimension is suitable for MP3, function cellphone, smart health device, etc..
Check Stock

2 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V - 5V

  • What you will get: you will get 2 OLED display modules with classic display colors, self illumination with no need of backlight.
  • Power-saving display: the I2C OLED display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
  • More details: this I2C LCD display is compatible with Arduino, ESP8266, ESP32, STM32, etc., 3.35V power.
  • Operating temperature: -40 - 85 degree....
  • Good compatibility: this I2C OLED display module is compatible with Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero, compatible with Arduino, also compatible with....
  • Product manual: as shown in the instructions.
Check Stock

SHT31 Temperature & SHT31-D Humidity Sensor Module Breakout Weather for Arduino

  • The ESP8266 Weather Station IoT Starter Kit includes an ESP8266 ESP-12E Development Board, a 0.96" OLED display, a DHT11 Temperature and Humidity....
  • Developer-friendly module ESP8266 come with a USB connector and the maximum number of available pins. ESP8266 full IO mouth leads directly download....
  • The 0.96" 128x64 pixel OLED display supports I2C, wide viewing angle, low power consumption and high response speed.
  • DHT11 Temperature and Humidity Sensor with characteristics humidity measurement range: 20~90% RH, humidity measurement accuracy: +/-5% RH, temperature....
  • Four Projects in One – The ESP8266 and Wireless IoT development lets you 4 home projects, including weather station, plane spotter, world clock and....
Check Stock

LCD Display Module,1.8 inch 4-Wire SPI TFT LCD Display Module Driver with PCB 128x160 chip ST7735 51/AVR/STM32/ARM 8/16 bit

  • ★This is 0.96" SSD1306 128X64 OLED LCD Display with I2C IIC SPI Serial module..
  • ★It is OLED display without backlight and it is low power dissipation.High contrast, thus supporting clear display..
  • ★Communication: IIC, only two I / O ports.
  • ★If there is any problem with the product, please do not hesitate to contact us, we will help you solve the problem..
Check Stock

MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Ar duino

  • ★ ★ Product manual: Please get the link from the product guide below.
  • OLED display, no need backlight, self-illumination, Display Color: Blue. Plz note: These I2C OLED Display Module comes without pin headers.
  • The display performance is better than the traditional LCD display, also lower consumption.
  • IIC (I2C communications) simplifies connections.
  • Use with Ar duino, ESP8266, ESP32, STM32, etc.
  • We have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation.
Check Stock

GeeekPi Raspberry Pi CM4 Router Board,Raspberry Pi Compute Module 4 Expansion Board Breakout Board Module for Raspberry Pi Compute Module 4 Series

  • CM4 Router Board is an expansion board based on the Raspberry Pi Compute Module 4. It brings Raspberry Pi CM4 two full-speed gigabit network ports and offers better performance, lower CPU usage, and higher stability for a long time work compared with a USB network card..
  • The board still retains the characteristic GPIO pin header of Raspberry Pi, which makes it applicable for connecting other hat board such as Pi hats, sensors, and PoE hat board, and cooling fan, etc..
  • There is also a USB2.0 interface that can be connected to USB flash driver, USB keyboard, printers etc..
  • Besides, there is an OLED(0.91 inch) screen will help you to customize your Router Board's information display style..
  • 1 x 0.91 Inch OLED Display (Pre-installed).
Check Stock

1.5inch RGB OLED Display Module, 128x128 Pixels 16-bit High Color (65K Colors) SPI Interface Compatible with Arduino Raspberry Pi Jetson Nano STM32

  • This is a general 1.5inch RGB OLED display module, 128x128 pixels, 16-bit high color (65K colors),clearly displays colorful images, with embedded controller, communicating via SPI interface..
  • Driver: SSD1351. Display color: RGB, 65K colors.
  • Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor.
  • Dimension: 44.5 x 37 (mm),Operating voltage: 3.3V / 5V,Viewing angle: 003e160°,Interface: 4-wire SPI, 3-wire SPI.
Check Stock

MakerFocus 4pcs I2C OLED 0.96 Inch OLED Display Module IIC SSD1306 128 64 LCD White with Du-pont Wire 40-Pin Female to Female for Ar duino UNO R3 STM

  • Product description document, get the link in Product information, new version: First row GND pin instead of VCC, the pin is already soldered, you don’t need to solder it yourself! High quality, low price, 40 DuPont lines are free..
  • I2c IIC Serial Oled LCD LED Blue Display Module: Interface: VCC: 3.3-5V.
  • It is OLED display without backlight and it is low power dissipation.The thickness of galss is only 1.4mm. Color: White.
  • The IIC address can be changed, it is convenient to use with different machines. Driver IC: SSD1306.
  • Supported platforms: for ar duino, 51 series, MSP430 series, STIM32 / 2, SCR chips..
  • 40pcs Du-pont Wires: 20cm/7.87 inch, 2.54mm 1p-1p pin head. The male ends meant for insertion into standard 0.1"(2.54mm) female sockets and the female ends are meant for insertion into standard 0.1"(2.54mm) male headers. They can be used for PCB project, pc motherboard..
Check Stock

ASUS ROG Ryuo 120 CPU Cooler with OLED Display and Aura Sync - Black

  • Personalised Gifs can be added to OLED Display.
  • Addressable RGB LED with Aura Sync Support.
Check Stock

3.12 Inch Spectrum Analyzers OLED Music Spectrum Display Analyzer Audio Level Indicator VU Meter 1P

  • 3.12 inch OLED music spectrum display analyzer audio level indicator VU METER 1P. Support 8 kinds of display effects (key switch), support time display, temperature and humidity detection..
  • Spectrum range: full audio range (20HZ~20KHZ).High and low temperature resistance, more suitable for vehicles..
  • Advantages of OLED screen: Low power consumption, high brightness.
  • Compared with ordinary LCD screens, OLED has a faster response speed.
  • OLED is more resistant to vibration than VFD (vacuum screen).
  • No music input automatically switches to the time display function..
  • Built-in high-sensitivity microphone, no longer worry about wiring.
  • It also supports audio line input, it is recommended to use audio line input to obtain more accurate spectrum effects..
Check Stock

MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module White I2C OLED Screen Driver DC 3.3V~5V for Ar duino

  • ★ ★ Product Manual: Please get the link from the product description below.
  • 128x32 OLED display, no need backlight, self-illumination, Display Color: White. Plz note: These I2C OLED Display Modules come without pin headers..
  • The display performance is better than the traditional LCD display, also lower consumption.
  • I2C oled display, IIC (I2C communications) simplifies connections.
  • Use with Ar duino, ESP8266, ESP32, STM32, etc.
  • We have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!.
Check Stock

DORHEA 10PCS 0.91 12832 IIC I2C OLED Display Module 0.91inch I2C 128x32 SSD1306 LCD Display Module White I2C OLED Screen Driver DC 3.3V/5V with 4 Pin Headers for Ardu ino

  • 0.91 inch OLED display, no need backlight, self-illumination, Display Color : White, Resolution: 128 x 32..
  • The I2c OLED display performance is better than the traditional LCD display, also lower consumption, high resolution OLED for any of your micro....
  • The 0.91 display performance is better than the traditional LCD display, it uses the very common I2C bus, and runs on the SSD1306 display driver..
  • 0.91 oled compatible with Ardu ino, ESP8266, ESP32, STM32, etc.
  • The 12832 display can run on 3.3v. It is legible, even with 4 lines of text. Highly recommended for projects that require some form of user interface..
Check Stock

AOCHUAN SMART X Pro 3-Axis Handheld Smartphone Gimbal Stabilizer, Built-In Wireless Charging OLED Screen LED Fill Light, Portable and Foldable, Face Tracking Video Stabilizer for iPhone and Android

  • [Small and Light] Foldable design. Smaller and lighter, easily fit into your backpack or even your pocket..
  • [Wireless Charging] Wireless charging module is equipped in the mobile clip. Through one touch, the wireless charging function is activated. This design saves you from the winding wires. And constant power brings you reassuring photography experience..
  • [OLED Screen] Particular OLED panel can display the shot mode, battery life and Bluetooth status in real time. The gimbal status is visual anytime, thus facilitating beginners a lot..
  • [Fill Light] The built-in ring light in the mobile clip is nimbal and nice. Benefiting from the three-section adjustable brightness, night shots become equally splendid..
  • [3-Axis Stabilization]Fast fold or unfold in one second. Enjoy shooting anywhere and anytime. Upgraded 5.0 anti-shake algorithm makes gimbal motion more steady..
  • [Combined Zoom, Dual Focus Control] dual combination zoom control system for a better video shooting experience, rotating the focusing roller can adjust the focus(clear/faint), sliding zoom push rod can adjust the focal length（zoom in/zoom out)..
Check Stock