Categories

Best Olympic Barbell Holder

yuntop 1 Pair Barbell Clamps of Locking 1'' Diameter Standard Bar, Quick Release Locks Collar Clips, Dumbbell Lock Clips for Workout Fitness Training Bodybuilding(Red)

  • High-quality materials: These 1-inch Olympic barbell collar clips are made of reinforced plastic and high-strength nylon materials using casting and high-pressure processing technology, and will not break easily, which is very important for people who are exercising..
  • Safety guard:The Olympic barbell lock ring is safer than most traditional spring clips. The Olympic barbell bell will be firmly locked on the bar, eliminating your fear that the bell will fall during exercise.You will feel much more confident and have more pleasant training sessions..
  • Easy to install and remove:These barbell clips and clips are easy for you to open and close with one finger，can be installed in a short time. The one-button lock design is easy to install and remove..
  • Necessities for fitness enthusiasts: Our barbell clip is small and exquisite, easy to carry, whether you are working out in a personal gym, professional club or studio, you can put it in your sports bag without taking up a lot of space and weight light..
  • This barbell clamp fits for 1 inches Olympic standard size.Perfect for crossfit workouts,Olympic lifts,overhead press,deadlifts,bench press,or any other workout using 1 inches Olympic Barbell..
Check Stock

Doeplex Olympic Weight Plate Holder Power Rack Attachment for 2x2 inch Power Rack - Fit 2\ Olympic Weight Plates

  • 【Save Space】When your room space is limited, it may be difficult to organize the weight plate. The olympic weight plate holder will help you keep your home gym clean and save space while protecting your weights and equipment..
  • 【Easy to use】This weightlifting board bracket is easy to insert and lock. Just slide the pin into the hole in the barbell frame and swing it down to lock it in place. Pretty sturdy on your power cage. Strong bearing capacity, very suitable for home / gym squat racks..
  • 【High Duty】This olympic weight plate holder power rack is made of sturdy steel, the rigid steel ensures that your weight plates are stored safely.Please note that this product can not be touched with water for a long time. Always wipe it with dry towel to keep it dry to prevent rust and affect its use..
  • 【Extra Long】 Dimension：13.3” * 5.1” * 2”. This olympic weight plate holder power rack attachment fits most power cages with 2” x 2” tube (with 1" holes). The length of 13 inches can hold multiple barbell weight plates..
  • 【Warm Notice】Please confirm your size before buy！！ Designed to fit 2" x 2” square tube power racks with 1” hole & 2 “diameter. The welding part of the side will be slightly uneven, but it will not affect the use....
Check Stock

Hididi Olympic Barbell Clamps Weight bar Plates Quick Release Weight Collars Clips for 2-inch pro lockdow Workout Weightlifting Fitness Training Safety pad Grips Dumbbell bar Gym

  • 【Fastens to all 2 inch Olympic Bars】barbell clips Fits all Olympic barbell sleeves (2").Our barbell collars are widely used for most cast grip plate ,cast plate, and rubber grip plate ,Perfect for all standard home gyms and professional gym owners.Tested by’ thousands times to make sure the maximum grip strength and Professional level..
  • 【Locking or fixing olympic Barbell Weight and Plate,KEEP SAFE] barbell collars(sold in pair) Designed to lock the barbell plate or weight.Keep safe for the trainer or people stand by. Our clamps are Perfect for workouts,Olympic lifts,overhead press,deadlifts,bench press, or any other workout like strong lifts, powerlifting, weight lifting using 2 inches Olympic Barbell..
  • 【Made of hardened nylon resin frames and injection-molded pressure pads】Exceptional durability .The durable cast body and high-pressure grip pads make our barbell collars clamps virtually indestructible! The Nylon, Engineering plastic.It will be more durable and harder as time goes on.More using casting and high-pressure processing.You could use them years after years.
  • 【Install Or Removal within seconds】 Fast locking and quick release action benefit from Snap-Latch design.Our 2 inch dumbbell collars are very easy to use with One-hand inst....
Check Stock

Olympic Barbell Bar 7ft-45LB 1000LB/1500LB Olympic Bearing Barbell (1000LB-Yellow)

  • 【Distinction】Olympic barbells are 7 feet long and will weigh 45lbs. Olympic barbells are longer and heavier than regular, powerlifting barbells. Most gyms and commercial fitness centers have Olympic barbells because they hold more weight and are more durable than a regular barbell. In comparison to the Olympic barbells, standard barbells are shorter and lighter..
  • 【Bearings】An important feature of the Olympic barbell is the bearings, You need a dependable sleeve rotation from your bearings/bushings with a modest amount of bar whip for most exercises. Standard powerlifting bars do not offer this feature..
  • 【Knurling】Olympic barbells have centre knurling which can distinguish it from other bars. The centre knurling primarily for the back squat, so that it prevents the bar from sliding down the back during heavy lifts..
  • 【Rotation】Olympic barbells have 2-inch, rotating sleeves. The reason why many people prefer an Olympic bar to its standard counterpart is the rotation. The rotation on the sleeves reduces the amount of torque created by the plates, which provides a more secure grip and reduces stress on your wrist....
Check Stock

UBOWAY Compact Dumbbell Rack Stand Barbell Rack: Weight rack for Dumbbells, Olympic Barbell Bar, Olympic Weight Plates - Weight Storage Rack for Strength Training Home Gym Fitness Exercise Equipment

  • ...this problem.It provides a plenty of room to place your dumbbells on top, your barbell plates underneath and your barbell bar at the back. All you need is this one dumbbell weight rack to store your home gym equipment..
  • 700LB Weight Capacity: This weight rack for home gym designed to hold dumbbells, barbell bars and Olympic Grip Plate. There are 4 layers available for placing barbell bars, with a maximum weight of 30 pounds per layer. And 7 poles to place 1" or 2" Olympic Plates, each pole can hold up to 100 pounds. Dumbbells can be placed on the top layer, up to 220 pounds..
  • Commercial Grade Steel: Although our weight rack are designed for home gym storage, we still use commercial grade steel to keep all your weight safe at all times. Its durable frame can withstand heavy loads while resisting damage from intensive use over time. The triangular base design makes this weight holder rack for dumbbells very stable. Wider iron steel tubing makes this weight holder rack even stronger..
  • Anti-scratch and Safe: The rubber inserts prevents damage to your dumbbells.
  • The rubber end caps of the free weight rack keep your floors from being harmed. This weight holder rack for dumbbells protect your dumbbells and your floor equally..
Check Stock

ZOVOTA Olympic Weight Plate Holder Attachment Fits 2\ x 2\ Weight Strength Training Plates Tube Power Cage Set of 2 Storage Rack

  • 【High Duty】This olympic weight plate holder power rack is made of sturdy steel, the rigid steel ensures that your weight plates are stored safely.Please note that this product can not be touched with water for a long time. Always wipe it with dry towel to keep it dry to prevent rust and affect its use..
  • 【Save Space】When your room space is limited, it may be difficult to organize the weight plate. The olympic weight plate holder will help you keep your home gym clean and save space while protecting your weights and equipment..
  • 【Easy to use】This weightlifting board bracket is easy to insert and lock. Just slide the pin into the hole in the barbell frame and swing it down to lock it in place. Pretty sturdy on your power cage. Strong bearing capacity, very suitable for home / gym squat racks..
  • 【Extra Long】 Dimension：13.3” * 5.1“ * 2 “.This olympic weight plate holder power rack attachment fits most power cages with 2" x 2" tube (with 1" holes). The length of 13 inches can hold multiple barbell weight plates..
  • 【Warm Notice】Please confirm your size before buy！！ Designed to fit 2" x 2” square tube power racks with 1” hole & 2 “diameter. The welding part of the side will be slightly uneven, but it will not affect the use. Pl....
Check Stock

FUXIN Wall Mount Barbell Holder, Horizontal 2 Weight Bars Rack, Olympic Barbell Storage Rack for Home Gym, 1 Pair

  • Solid Structure - Heavy-duty steel unibody construction made a quality barbell rack, thicken solid steel provide maximum weight capacity for all kinds of extreme usage.
  • Thicken Rubber Layer - Covered with high density rubber, great buffer when placing your bar and prevent any scratching, anti-skid texture increase friction between rack and barbell helps stay stable.
  • Including Hardware - Package contain all screws accessories needed for wall-mount. The barbell holder have certain weight so please install only on solid wall for safety and make sure for setting up tight before use.
  • Space Saving Design - Barbell Holder Width 2.12 inch, Length 3.34 inch, Height 13.77 inch. Deep groove support barbell firmly. Adjust the spacing between two rack to adapt to different kinds of barbell.
  • Multiple Usage - Fits well with most of the barbells: olympic, standard, short, EZ curl, training, triceps, swiss, trap, etc. Simple but functional design help keep your room neat.
Check Stock

Olympic 2-inch Weight Plate Tree Rack with 6 Barbell Holders - Holds Up to 800 lbs. of Olympic Weight Plates – Workout & Lifting Equipment for Professional & Home Gym Storage Use - Assembly Required

  • OLYMPIC WEIGHT PLATE TREE: Safely store and organize Olympic 2-inch weights with this Olympic weight plate tree and barbell holder from Crown Sporting Goods. Perfect for benching, squatting and popular weightlifting techniques!.
  • FOR 2-INCH OLYMPIC WEIGHT PLATES: Holds 2" bumper plates on its 7.75" long pegs and up to 6 Olympic, curl, or trap deadlift bars. Central weight bearing construction.
  • HOLDS 800 LBS: Measures 18.5" x 24.5" x 40", holds approximately 800 pounds of weight in several configurations.
  • ORGANIZATION & STORAGE: Great for organizing and safely suspending weights in fitness facilities or home gyms. At the end of a workout, remove weights from your barbell and place them safely back into place on this weight tree.
  • ASSEMBLY REQUIRED: All pieces arrive flat in packaging. Includes instructions and hardware for a simple set up.
Check Stock

KTTGYRE 2PCS Barbell Collar Weight Bar Locks Grip Clips Quick Release Olympic Barbell Clamp for Weightlifting, Olympic Lifts and Strength Training （1 Pair Black

  • ★【Great Material】:Our upgrade locking barbell collars are made of high-strength nylon and reinforced plastic with injection molded pressure pads.The durable cast body and high-pressure grip pads make the collar virtually indestructible but with lighter weight..
  • ★【Size And Quantity】: This barbell clamp fits for 2 inches Olympic size.Perfect for crossfit workouts,Olympic lifts,overhead press,deadlifts,bench press,or any other workout using 2 inches Olympic Barbell..
  • ★【Easy to Use】:Easy to use, one hand install Spring powered,These collars are a favorite for crossfit and many other commercial gyms..
  • ★【Barbell Clamps】:The dumbbell clamps barbell clips adopt upscale ABS plastic and durable high strength nylon as main material, high pressure casting processing make them not easy to be peeled and deformed, strong construction is virtually indestructible, make them can be used at a long time..
  • ★【Wide Useful】:The 2 inches fitness gym barbell buckle is perfect for cross fitness training, overhead press, deadlifts, bench press, or any other workout using 2 inches Olympic barbell bar and 2 inches dumbbell bar, especially for Olympic athlete lifting weights, give them a stable and safe sports environment..
Check Stock

StarONE Olympic Barbell Rack Barbell Holder Weight Bar Holder Barbell Storage Wall Mount,Hold 6 Bars,Steel

  • 【MULTIFUNCTION】Barbell rack can hold 6 bars, like Olympic/Standard weight bars and other weightlifting tools, keeping your bars organized..
  • 【MORE SECURITY】The depth of the barbell storage hook is more deeper to make sure the barbell securely rest in the rack..
  • 【STURDY STRUCTURE】Barbell holder made of heavy duty steel which can bear about 440 lbs.Durable Powder Coated ensure the protecting from scratches..
  • 【MULTI-INSTALLATION】The rack can be installed on the concreat wall or on the wood studs..
  • 【PACKAGE INCLUDE】1set Barbell Rack Bar,12pcs Rubber Pad (already installed on the Rack),6pcs Expansion Screws,Instructions..
Check Stock

Greententljs Barbell Collars 2 Inch Quick Release Pair Locking 2' Pro Olympic Bar Clip Lock Barbell Clamp 45lbs Weights Plates Clips Workout for Weightlifting Fitness Training (Neon-Green)

  • 100% Brand New.PLEASE NOTE THE SIZE,---If you want 1 inch Standard Please search greententljs 1 inch barbell collars..
  • This barbell clamp fits for 2 inches Olympic size.Perfect for crossfit workouts,Olympic lifts,overhead press,deadlifts,bench press,or any other workout using 2 inches Olympic Barbell..
  • Material:reinforced plastic ,ABS (HIGH Quality:Nylon 662),Package Include: 2 * Barbell Clamps.
  • Satisfaction Guaranteed: If you're unsatisfied with our 2 inch olympic barbell clamps, simply return them via Amazon's no hassle returns.
  • Easy to use, one hand install ~ Spring powered Snap-Latch design to keep you safe.These collars are a favorite for crossfit and many other commercial gyms..
Check Stock

VAIIO Single Olympic Barbell Hanger,Garage Gym Bar Wall Rack,Vertical Barbell Mount Rack,Black Powder Coated,Space Saving Commercial or Home Gym Accessory,Holds Under 33mm Bar Size fathers day

  • 【LET YOUR HOME GYM NO MORE CLUTTERED】The VAIIO gym storage rack is a high quality storage product which is designed specifically for the private gym. This weight plate holder has two stations. This wall-mounted barbell bracket can hang Olympic Size Barbells, Curl bars, axle bar or other specialty bars on the wall neatly..
  • 【STURDY & DURABLE】Our barbell holder is made of steel plate which is 5MM thick. Then there is a thick, durable, coarse powder coating on the surface. All the fingers/combs are spaced apart to avoid overlapping, thus protecting your equipment and shelves from scratches..
  • 【INSTALL EASILY】It’s so easy to install this barbell holder that every adults can do it in a few minutes.The unique Horizontal bubble which are included in the package,can help you to keep the barbell holder in parallel with the ground when you install it.You can find there are screws, expansion rubber stopper, small L-shaped wrench, horizontal bubble and installation manual in the package. The instruction manual show you how to easier to install the barbell holder on wooden or concrete walls..
  • 【UNIQUE DESIGNED】We know every fitness equipment is your partner. They will help you to get the muscles you want. So we added a protective pad on the hanger to ....
Check Stock

Titan Fitness 6’ Aluminum Olympic 15 LB Weightlifting Technique Bar

  • GREAT FOR OLYMPIC FORM TRAINING: Olympic weightlifting is a great way to tighten and tone your body. With this technique bar, you can perform a....
  • LIGHTWEIGHT TO FOCUS ON TECHNIQUE: This barbell is constructed with aluminum, and weighs only 15 LB as a result. A low weight barbell like this will....
  • EASY-GRIP SURFACE: Working out means working up a sweat, and perspiration can make it hard to get a firm grip on your equipment. Fortunately, this....
  • ALUMINUM CONSTRUCTION: The barbell’s aluminum construction gives it a brilliant chrome finish, and will look gorgeous in any home or commercial gym....
  • DIMENSIONS: This barbell measures at 72” in overall length and weighs approximately 15 LB. The Olympic sized weight sleeves have a diameter of 2”....
Check Stock