Categories

Best One Hand Jack Tool

BLACK+DECKER Floor Sweeper, 50 Minutes Runtime, Powder White (HFS115J10)

  • Leave no mess behind with up to 30 minutes of sweeping power.ONE-HANDED CLEANING – Lightweight and easy to maneuver comfortably with one hand.HANGING LOOP – Hang the sweeper up on the wall so it’s ready for next time.Includes : (1) Powered floor sweeper, (1) Jack plug charger, (1) Brush Bar Cleaning.
  • So lightweight, sleek and maneuverable, you can easily clean one handed.
  • Head swivels smoothly to Steer effortlessly around, under and behind furniture.
  • Check battery status with one glance at the built in LED.
  • Lies flat to easily Glide under furniture and beds.
  • MULTI-SURFACE USE – Cleans hair, dirt, and debris from carpets, car interiors, furniture, and high-traffic areas..
  • CORDLESS POWER – Grab-and-go, cordless design allows for quick cleaning without lugging around cords..
  • ONE-HANDED CLEANING – Lightweight and easy to maneuver comfortably with one hand..
  • HANGING LOOP – Hang the sweeper up on the wall so it’s ready for next time..
  • Includes : (1) Powered floor sweeper, (1) Jack plug charger, (1) Brush Bar Cleaning Tool.
Check Stock

GripStick Headphone Plug Extraction Tool

  • PRODUCT COMPOSITION: This headphone extraction tool kit cutting has stainless steel pipes. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack..
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 100 bucks will be saved..
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above..
  • It is portable and can be used to disassemble glasses and watches and some other electronic products. Hope you like it!.
Check Stock

Headphone Plug Extraction Tool - Headphone Jack Removal Tool, Tube Grip Stick Puller, Jack Remover - 4PC

  • ...dphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack..
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved..
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Rotate the tool when you can't press it in..
  • HOW TO USE: Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover..
  • GUARANTEES: This set of headphone removal tool is considered a single-use tool. But we offer a 100% satisfaction guarantee.....
Check Stock

Lifting Jack Pad for Tesla Model 3/Y/S/X , 4PCS Rubber Jack Pad Adapter Pucks Tool Chassis Jack Point Pad Sturdy Adapter , Car Tire Repair Tool Kit with Storage Box

  • ❤ Strong Material: Our jack pad is different from others on the market. The jack pad is made of durable black rubber. One-piece Molding with storage bag. Sturdy and durable..
  • ❤ Precision Design: The post on the jack pad precisely locates the tool in the center of the jack point on the car. The tool provides a comfortable amount of clearance between the batteries and the rim of the floor jack saddle..
  • ❤ Easy to use: Insert the pad into the center of the jack point hole on the car and place the jack below it..
  • ❤ Fits An Array Of Jacks, Floor Jack And Lift Vehicles -- Our pucks are made to fit a wide array of jacks /floor jack and lift vehicles. Their universal size allows them to meet a wide-array of needs, though exact fit will vary..
  • ❤ Package includes: 4x Lifting Jack Pad, 1x Rasper Tool,1x Needle Tool,3x Repair Strips,10x Tire Repair Rubber Nail,1x Storage Box. In an emergency situation, you may need a tire fixed.So this tire repair kit will come in handy!.
Check Stock

Platinum Tools Xpress Jack Termination Tool Clamshell Accessory Box (13501C)

  • Heavy-duty all carbon tool steel construction.
  • Designed for 110-type 4-pair keystone jacks.
  • Ergonomically designed with a comfortable hand grip which reduces hand stress on large jobs.
Check Stock

Cable Matters Crimp Tool for Cable Matters Cat 6 90-Degree RJ45 Slim-Profile Keystone Jacks with Model 180070 (Not compatible with Model 180005 Series Keystones)

  • Precision termination crimp tool simultaneously cuts and terminates all 8 conductors into a keystone jack.
  • Ensures consistent termination of Cat 6 Ethernet cables for reliable performance.
  • 50% faster labor saving keystone jack crimping tool finishes the job quickly and efficiently.
  • Ergonomic ratcheted design reduces hand fatigue and provides a rapid and clean installation.
  • Heavy duty metal tool with cold rolled steel construction is built to withstand frequent use on the job site.
  • Comfort molded grip handles with treads make the tool easy to grasp.
  • Keystone jack compatible with a precision module for our Cat6 90-Degree Slim Profile RJ45 Keystone Jacks (Model 180070 ASIN B06Y8T7NSH).
  • Convenient tool case stores the crimp tool when not in use.
  • Zippered case includes additional compartments for storing keystone jacks and other small tools.
Check Stock

Upgrated to Version 2.0 - Headphone Jack Removal Tool - Headphone Plug Extraction Tool, Tubes of Different Thickness, Jack Remover

  • ...dphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack..
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved..
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above..
  • GUARANTEES: This set of headphone removal tool is considered a SINGLE-USE tool. But we offer a 100% satisfaction guarantee. If you are not satisfied ....
Check Stock

kenddeel Headphone Plug Extraction Tool- Remove Broken Headphone Plug from Headphone Jack of Mobile Devices

  • ️Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks..
  • ️Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover..
  • ️Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough..
  • ️Tep: This set of headphone jack remover tool is considered a single-use tool..
  • ️If you have any question, please feel free to contact us by email..
Check Stock

Merchy Hero Cabinet Jack Support Pole – 2Pcs Set Multifunctional Extension Pole Third Hand Tool with Adjustable Length – Non-Slip Pads and Comfortable Foam Grip Telescopic Pole – Rotating Head

  • Multifunctional Tool: The Merchy Hero extendable pole has wide applications for DIY home projects as well as for construction workers and handymen, being ideal as brace, jack, support for drywall, crown moldings, cabinets hand, dust barriers, cargo bar and more!.
  • Premium Grade Materials: This closet pole holder is made with superior grade, highly durable materials, a combination of high density metal core and heavy-duty plastic elements guaranteed to hold up to 25kg/55lbs..
  • Adjustable Height: Unlike similar products on the market, this multifunctional pole jack features an adjustable height with a maximum length of up to 45 inches, allowing you to free your hands, increase work safety and maximize efficiency!.
  • User-Friendly Grip: The Merchy Hero telescopic hand lifting tool jack is equipped with a user-friendly foam grip which provides excellent stability and doesn’t slip from your hands. The push-lock and unlock button is easily accessible for enhanced safety..
  • Rotating Head with Non-Slip Pads: This pole holder includes 2 x 3rd hand tools per set and comes with an intelligent design based on non-slip pads plus 45-degree angle adjustment head with fine tuning rotation. A perfect tool for a variety of projects!.
Check Stock

MLLIQUEA Scissor Lift Jack for Car with Hand Crank/Wrench/Lug Wrench, Lifting Jack Kit Max 3 Ton Capacity, Ratchet Handle Tool Saving Strength Design, Oversized Bas(qianjinding-11-3)

  • Specifications-Maximum lifting weight: 3 tons (6,614 pounds).
  • lifting operation distance from 4.1 inches to 17.3 inches..
  • Intelligent mechanism-two operation methods: the scissor jack is equipped with labor-saving hand cranks and a ratchet and labor-saving wrench for opening and closing the scissor jack.
  • it will help you use 2 handle tools to lift the vehicle faster, effectively reducing 90 percent percent The amount of work required to lift the vehicle..
  • Tire socket wrench tool-The jack is equipped with 1 socket drill adapter and 2 CR-V sockets ((17/19 mm, 21/23 mm)) for loosening or tightening nuts. The telescopic handle can be extended to 19 inches for maximum leverage..
  • Bring your own bag-Bring your own carrying bag, which is more convenient to carry and the packaging is more compact. Including: 1 3ton jack.
  • 1 socket drill adapter with 2 CR-V sockets.
  • Note-Do not use on sloping ground, be sure to use on flat roads. The jack is only used as a tool to lift the car, not as a tool to support the car.
  • 1 year , if you have any questions, please feel free to contact us..
  • Guaranteed purchase-We know that you have many choices here, but please believe that our quality is firs....
Check Stock

Headphone Jack Removal Tool, Tube Grip Stick Puller, Jack Remover ，Headphone Plug Extraction Tool- Remove Broken Headphone Plug from Headphone Jack of Mobile Devices 6 PCS

  • Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks..
  • Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover..
  • Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough..
  • Tep: This set of headphone jack remover tool is considered a single-use tool..
  • If you have any question, please feel free to contact us by email..
Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

  • ..., Dodge, and Chrysler vehicles with V8 and V6 engines.
  • Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
  • EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
  • After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
  • Continue tightening system into place with hand wrench (not included) and remove installer assembly.
  • CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
  • Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to corrosion.
  • CONVENIENT STORAGE: Heavy-duty plastic blow-molded case provides convenient organization and easy transportation.
  • The 10 x 5.2 x 2.8 inch (25.4 x 13.2 x 7.1 cm) carrying case features lock latches for safe storage.
Check Stock

CFYUSEU Scissor Lift Jack Max 3 Ton Capacity with Jack Socket Drill Adapter, Lifting Jack Car Kit with Wrench/Lug Wrench for Car SUV MPV, Black, QJD-3-1

  • Come with 17mm Socket Drill Adapter: The 3 tons jack will come with a 17mm/0.67inch socket drill adapter, reduces time and effort to raise or lower your scissor jacks, only takes about 5 seconds..
  • Two way to handle: The scissor car lift jack comes with socket drill adapter and ratchet wrench to put the scissor jack up and down. It will help you lift your vehicle more quickly with 2 handle tools..
  • With Lug wrench: The lift jack comes with 1 x telescoping lug wrench and 2xCR-V sockets(17/19mm,19/23mm) to loosen or tighten the lug nuts.Telescoping handle extends to 19 inches for maximum leverage..
  • Come With bag: With the carry bag, Making your carrying more convenient and making the package more compact. Includes: 1x 3 tons jack.
  • Lift Range & Note: Lifting range from 4.1 inches to 17.3 inches.
  • Maximum lifting weight: 3 tons. The jack is only used as a tool for lifting the car, not as a tool for supporting the car. 1 year warrnty, if you have any questions, please feel free to contact us..
  • Included components: Jack Socket Drill Adapter, Lifting Jack Car Kit with Hand Crank/Wrench/Lug Wrench.
Check Stock