Best One Touch Tube Fitting
304 Stainless Steel Compression Tube Fitting Double Ferrule Joint Connector Equal Straight Adapter(Φ1/2-Φ1/2)
- STAINLESS STEEL: The 304 stainless steel compression tube fitting double ferrule construction for durability and resistance to corrosion..
- SCOPE OF APPLICATION: The stainless steel compression tube fitting double ferrule has dual couplings for joining two tubes of the same diameter..
- LESS LEAKAGE: This stainless steel compression tube fitting has a double ferrule construction, reducing the possibility of leakage..
- SIMPLE OPERATION: Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut..
- APPLICABLE MEDIUM: This stainless steel compression tube fitting double ferrule is applied to oil, water, gas and other non-corrosive or corrosive medium..
Check StockSMC KM13-06-08-3 PBT Push-To-Connect Tubing Manifold, 2 Inlets-8 mm, 3 Outlets-6 mm Tube OD
- Port A One-touch Fitting, Port B One-touch Fitting.
- One-touch fittings give the most efficient operation.
Check Stock
RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)
- Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
- Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
- Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
- Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
- Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Check Stock
Bewinner Water Cooling Kit for PC 240mm Heat Sink CPU Water Block LED Fan Computer Cooling Kit Water Chiller Water Cooling Systems
- 【Complete Water Cooling Kit】All included240mm black heat sink+2pcs green LED fans+CPU water cooling block+Sine Wave Quiet Water pump+Cylindrical water reservoir with spiral belt+6 pcs PETG 50cm green hard tube+6 pcs Two-Touch Fitting..
- 【Universal Water Cooling Block】The CPU water cooling block made of red copper and transparent plexiglass,support for INTEL/AMD Dual Platform (for INTEL 775,1150,1155,1156,1366)(for AMD: AM2, AM3, AM3 +)..
- 【Extreme Heat Dissipation】18 Pipe 240mm Aluminum water cooling system heat exchange black heat sink,8L/min 15W G1/4 Thread size Waterproof High Stability Quiet Water pump, 200mm G1/4 universal thread Cylindrical water reservoir with spiral belt,two excellent performance green LED cooling fan..
- 【Complete Accessories】6pcs Rigid Tube Can bent when heating,also can be cut.6pcs 10x14 two-touch fitting,1pcs Water feeder,Make sure your installation goes smoothly..
- 【100% Satisfaction Guarantee】If you have questions about the product or are not satisfied with it, please contact us at any time, we will provide you with a best solution. Your satisfaction is our main concern..
Check Stock
2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)
- 2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
- Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
- The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
- Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
- Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
- Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
- Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
- Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
- It can help you drill easily and fast and save time and energy for you.
- The combination of blue and black color makes the dr....
Check Stock
Jienk 5PCS Pneumatic Female Elbow 1/4 Tube OD x 1/8 NPT Thread Push to Connect Air Fittings 90 Degree NPT Female Nickel Plated Brass Air Line Quick Connector for Air Compressor
- 【Durable】This fitting has a strong PBT housing with POM release button and zinc alloy ferrule. The thread port adopts nickel plated brass material. High pressure resistance, corrosion resistance and a long service life..
- 【Good Sealing Performance】Stainless steel tube gripping claw makes the grip force stronger, not easy to trip or leak. External tightening with a flat wrench or socket wrench..
- 【Push Lock】Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently. 360°rotation, after installation, the tube direction can be changed easily..
- 【Wildly Application】Hose fittings are used in the field for low-pressure hydraulic and pneumatic systems such as Pneumatic Actuators, Air Compressors, Automatic Manufacturing Operations, Aircraft Controls, and Tire Installation or in industries including Printing, Packaging, Textile. As well as moving parts such as control-valves, cylinders, air bag and air ride..
- 【Operating Pressure】 0~145 Psi 【Working Temperature】 32～140°F.
Check Stock2pcs Compression Tube Fitting Adapter, Stainless Steel Straight Adapter, Double Ferrule Joint Connector, for Connecting Pipes Fittings(Ф6-Ф14)
- 【Reasonable Design】The quick-screw design of the sleeve has good air tightness and is not easy to leaking..
- 【High-quality Materials】The tube fitting adapter is made of 304 stainless steel, which is resistant to rust and corrosion..
- 【Good Fixability】The design of the middle card board of the compression tube fitting adapter can be fixed without shaking..
- 【The Scope of Application】The tube fitting double ferrule joint connector is an adapter used to connect different types of pipes or fittings..
- 【Easy to Install and Disassemble】The stainless steel compression tube fitting adapter can be quickly installed and removed, making it more convenient to use..
Check StockSHENGHUISS 2 Pcs 1 inch Bimini Top Cap Eye End Boat Fitting Stainless Steel 316 Fits 1 inch O.D. Round Tubing with L Shape Hex Key
- Bimini Top Cap Size: Each eye ends measured approx 1.25'' O.D, 1'' I.D, fits for 1'' O.D. round tubing. One screw on each fitting measured M6. Pin: 1/4" bolt holes..
- 1’’ external eye end has shining polished looking and smooth touch.Perfect replacement for marine hardware and accessories, widely used for boating,bass boat,fishing boat, kayak, canoe, yacht,etc..
- Bimini Top Cap Cast from marine grade stainless steel 316 .Seawater corrosion resistance. stainless steel 316 bimini top eye end is a perfect choice to replace your plastic, nylon or broken fittings..
- Outside eye end for bimini top,This product is suitable for 1 inch tube, We use the international standard 1 inch tube for dimensional inspection to ensure that each product can be installed normally.
- Package Includes:2 pieces of Bimini top cap and 1 piece of L Shape Hex Key.
Check StockMars 11917
- Panel-mounted, barbed fitting allows tube connection on the side of a barrier.
- Fitting connects to tubing on one end and a female connector on the other.
- Acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
- Buna-N O-ring elastomer seal for long cycle life and repeatable, leak-free connection.
- Single-barb for increased pull-off resistance compared to three-barb styles.
Check StockLitorange 3 Pack Metal Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter, 3/8\ Tube OD x 1/2\ NPT Male
- ★ 【Material】: Heavy Duty Brass,strong and durable. Size: 3/8" Tube OD x 1/2" inch NPT Male Adapter..
- ★ 【Firm And Durable】: Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability..
- ★ 【Function】: Fitting connects to tubing on one end and has an NPT male connector on the other. Use with copper, brass, aluminum, or plastic tubing..
- ★ 【Tips】: Single ferrule compression fitting has fewer possible leak paths than twin ferrule fittings. Primary uses water, gasoline, oil and vacuum lines..
- ★ 【Package Include】: 3 PCS 3/8" Tube OD x 1/2" NPT Male connector. Comes with 1 year warranty..
Check StockAquaphor Advanced Therapy Ointment Body Spray Mini 0.86 oz
- One Essential Solution: Aquaphor is one essential solution for many skin care needs.
- use on dry, cracked skin, as a lip moisturizer, facial....
- Touch-Free Applicator: This Aquaphor Healing Ointment tube features a convenient touch-free applicator that allows for easy one-handed use.
- Easy Application: Touch-free applicator makes this Aquaphor tube a perfect replacement for a foot cream or travel size hand cream, with no need to....
- Ideal for Healing: Different from a body lotion or cream, this ointment is water-free, and soothes skin while creating a protective barrier that....
- Includes three (3) 3 ounce tubes of Aquaphor Healing Ointment Advanced Therapy Skin Protectant with Touch-Free Applicator.
Check StockUltraPure 3403410 1/4\ MPT x 3/8\ Tube Ozonator Compression Fitting
- Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing..
- This Metals sleeve compression tube fitting is made of brass, connects to a tube.
Check StockDELTA FAUCET 1920-DST Traditional Beverage Faucet, Chrome
- Works with RO systems, filtered water systems, or as a cold water tap.
- Air gap included with 1/4 in. tube for RO system and 3/8 in. tube for drain.
- Mounting wrench to assist in tightening mounting nut securely.
- Integrated supply tube with 3/8 in. compression fitting.
- DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard.
- Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines.
- Recommend minimum 2-1/2 in. clearance to backsplash.
Check Stock
