Categories

Best One Way Air Valve

Xximuim Inflatable Boat Air Valve,2PCS Inflatable Boat Replacement Caps Boat Spiral Air Plugs 0ne-Way Inflation Replacement for Inflatable Raft Boat Kayak

  • 【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable..
  • 【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation.The valve cover ensures air leakage..
  • 【Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 17mm....
  • 【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation....
  • 【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit....
Check Stock

Inflatable Boat Air Valve,2PCS Inflatable Boat Spiral Air Plugs One-Way Inflation Replacement Screw for Inflatable Boat

  • 【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable. Please allow a slight deviation for measurement. It is not a general-purpose type. Please check your required size..
  • 【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation..
  • 【Anti-leakage Design】The marine valve has a perfect design, and the valve cover ensures air leakage..
  • 【Fine Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 16mm .Please check size to make sure whether your valve bung fit this plug before purchase..
  • 【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation of your inflatable product by the valve, DO NOT use the product immediately! Leave your inflatable product inflated for 2 hours at least, to test if there is any tiny air leakage. especially for inflatable boats..
  • 【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit for netted ship .Putting an alternate inflatable boat valv....
Check Stock

1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve

  • .WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position..
  • .2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum)..
  • .Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
  • .This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized..
  • .1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas..
Check Stock

Inflatable Valve Cap, air mattress valve cover, Inflatable Air Valve Plug, 3 in 1 Airbed Valve Secure Seal Cap Screw Replacement for Canoe Raft Airbed Boat PVC

  • 【Leak-proof design】 Features high secure air protection, the valve cover design can ensure leak-proof when inflating.
  • 【Easy to Install & Replace】 The air valve fits the hole that is about 4.28 cm diameter, and has a plug cap, quite easy to install and replace whenever you need.
  • 【One-Way Inflation Valve】 The Intex air mattress valve cover is a one-way inflation valve, good for quick inflation, save your time.
  • 【Wide Use】 Fits most inflatable products, such as inflatable boat, kayak, raft, rubber dinghy, Inflatable sofa, Intex air mattress, Pool Floating, etc..
  • 【Environmental Protectional PVC Material】 3 in 1 Inflatable air Valve, Secure, sturdy, anti-corrosion and durable for long time use.
Check Stock

Wyin 4L Aquarium Co2 Generator System with Single Gauge Display Pressure Gauge, DIY Co2 Generator System Kit, Automatic Pressure…

  • 【New Upgrade Bubble Counter】As the water of the co2 generator system bubble counter evaporates quickly, In view of this, we have carried out a new upgrade to the bubbler. The bubble gauge is equipped with a syringe, which can be directly used to inject water (there is a one-way valve inside the generator, only into the water without leakage). And you can also add water during use, no need to close the air outlet, no need to remove the air tube, convenient for your use.
  • 【Safety Protection】 The Wyin co2 generator system 4l with automatic pressure relief valve, when the pressure in the cylinder exceeds 70KG will automatically release the pressure. A co2 generator system with a 12V waterproof solenoid valve makes you away from the danger of solenoid valve leakage and protects your safety. The u-shaped pipe connecting the air pipe is equipped with a one-way valve to prevent water backflow.
  • 【Fine the Bubbles】 Wyin CO2 generator system is equipped with an atomizer to refine the bubbles so that they can be easily dissolved in water and absorbed by plants, keeping your aquarium full of life. When using this product for the first time, there will be large bubbles ....
Check Stock

Brine Shrimp Hatchery Kits brine Shrimp Eggs Incubator Hatchery brine Shrimp Eggs Incubator Artemia Hatchery with Silver air Pump

  • The brine shrimp incubator contains：1pcs brine shrimp eggs incubator Hatchery，1pcs silver air pump with 1pcs black controller valve,1pcs check valve, 1pcs air stone,1 meter transparent aquarium tubing, 1 meter black airline ,one unit brine shrimp net colllector,two units automatic brine shrimp feeder for fish,three units Brine shrimp suction tube and six units Brine shrimp storage bottle.
  • Our brine shrimp incubator is designed professional for hatching brine shrimp eggs which include silver air pump air stone and aquarium tubing..
  • There are two ways to install our brine shrimp hatcher machine.You can use the four suction cup of shrimp incubator to stick it to the tank glass inside or you wanna install it out of the tank glass then you can use the tripod to install out of the tank..
  • The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at the bottom of the incubator to collect brine shrimp. Note that the direction of the inlet and outlet of the check valve must be installed correctly with the pipe, otherwise the air pump will not be able to discharge air..
  • The second way to provide oxygen to the brine shrimp from the bottom hol....
Check Stock

WHYHKJ 3 in 1 Inflatable Valve Cap Black Plastic Kayak Raft Secure Air Protection Valve Cap for Intex Inflatable Mattress Inflatable Boat

  • One way: The valve is a one-way inflation valve, suitable for rapid inflation..
  • High quality material: the three-in-one air cushion replacement cover is made of high quality plastic material, which is safe, strong and has a long service life..
  • Leak proof: with a high degree of safety air protection,the bonnet is designed to prevent leaks when inflated..
  • Easy to install and replace: it will fit into a hole about 4.28 cm in diameter and has a plug cover..
  • The air mattress valve cover is designed for certain branded inflatable airbeds, such as for Intex airbeds. Very easy to install and replace,you will find it convenient..
Check Stock

3/4\ Brass Electric Solenoid Valve,  110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

  • High quality 3/4inch Brass Electric Solenoid Valve： Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.  .
  • Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
  •   3/4" NPT port,   Working temperature range: -5 ℃~80 ℃.
  •  Operating  Pressure: MIN.0kg/cm - MAX.10kg/com  .
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket.   .
  • Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
  • This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..
Check Stock

Air Compressor Pressure Regulator with Dial Gauge, 0-175 PSI Air Gauge for Air Compressor and Air Tools (Four Way Valve)

  • Four Way Valve: This air pressure regulator has four holes. Three holes of 1/4″ NPT and one hole for 1/8″ NPT..
  • Package included: 1 x Air Pressure Regulator (Four-way valve), 1x Dial gauge for the 1/8″ , 1 × 1/4″ × 1/4″ Male Pipe, 1 × Nickel-plated Iron Air Plug, 1 × Nickel-plated Iron Air Coupler, 1 ×Thread Pipe Plug, 1 × Hex Wrench, 2 × portable Teflon tapes..
  • Max pressure: 175PSI, 12BAR. Practical and durable, easy to install and disassemble..
  • With the barometer: This regulator comes with a dial gauge meter, it can be set and read the data..
  • With the valve knob: can according to need to adjust air pressure. In use it can help to save electric energy..
Check Stock

2 PCS One-Way and 2 PCS 2-Way Air Flow Control Lever Valve Distributor Splitter Aquarium Air Pump Accessories, 4 Check Valves and 10 Fish Tank Suction Cups, 5 T and 5 Straight Connector

  • Suitable for standard 3/16" Airline Tubing..
  • High quality valves are durable and sturdy, never letting air leak..
  • Package Content: 2pcs one-Way Aquarium Air Valve Distributor, 2pcs 2-Way Aquarium Air Valve Distributo,4pcs Non-return Check Valve, 10 pcs Suction Cup.5pcs T Connector , 5pcs Straight Connector..
Check Stock

Cassius Coleman - Float Like A Butterfly, Sting Like A What You Talkin' Bout Willis?

  • PREMIUM MATERIAL: Spitfire Tube Valve Replacement is made of high dense ABS plastic, this Air Valve is sturdy, and durable..
  • ONE-WAY INFLATION: The Kayak Intex Challenger Plug Replacemnet is a one-way inflation valve, good for quick inflation..
  • Hat DESIGN: The valve hat design ensures anti-leak inflation. Please check size to make sure whether your valve bung fit this plug before purchase.
  • COME IN PAIR: Intex plug comes in pair, fit to most inflatable boat, raft, rubber dinghy, etc..
  • GUARANTEE: If you have any problem with this product, you can just take advantage of our 180 days warranty. We will replace it or give your money back for any reason..
Check Stock

Galaxy's Edge Star Wars Legacy Lightsaber (26' Lightsaber Blade)

  • Pack of 2 premium inflatable swords. Luke / Yoda green single blade design..
  • New design: Longer, stronger, and better fight action! Great for high-energy low-impact battle..
  • Customize stiffness and impact level by adjusting air pressure. These sabers can be inflated extra-firm to ridged with an air pump, or compressor. They will swell in diameter with over inflation, so try to keep the air pressure at a minimum to achieve the desired firmness, but maintain the original shape. *For the perfect air pump, no batteries required, and excellent sanitary choice for inflating these, go with Amazon’s ASIN: B091NDVVP3.
  • Easy inflation: One-way check valve incorporated in Inlet to help prevent air from escaping while inflating. For best results: Press back of inlet to help establish the seal prior to initial inflation. Inflate, and hold finger over inlet for a few seconds. This gives the check valve time to rest and seal, and helps maintain air between breaths. Close valve, wait a minute or so for the plastic to relax, and inflate further to desired firmness..
  • To deflate: pinch base of valve. This opens valve and allows air to escape..
Check Stock

WOW World of Watersports Thriller 1 Person Inflatable Towable Deck Tube for Boating, 18-1000

  • WILD WAKE ACTION: Towable water tube has a tapered construction higher in front than back to prevent submarining and give the rider wild wake action. You may get tired from holding on, but the excitement of the ride is thrilling..
  • DURABLE: Towable tube has a heavy-gauge PVC bladder, zippered valve cover, reinforced towing system. Safety valve ensures fast inflation and rapid deflation, allows one-way inflation that prevents air leakage. Fully covered in Tough Shell Nylon.
  • COMFORT AND PROTECTION: Inflatable towable tube has double webbing foam handles with knuckle guards consisting of foam-filled, nylon-wrapped handles with a neoprene base. EVA foam pads provide a comfortable ride and good traction around tight curves..
  • FAST INFLATION AND DEFLATION: Speed valve allows for one-way inflation so you never lose air when putting on the cap. The double safety valve locks the valve into place. Deflation is just as fast and convenient. Dimensions Deflated 54 in x 54 IN.
  • SUPERIOR TOWING SYSTEM: Tuff shell full nylon cover with zipper reinforced towing system is fast, secure and easy to attach with tow ropes. Use as a float in the pool or river, when not hooked onto a boat. Designed for 1 Rider.
Check Stock