Makeblock mBot Starter Kit with Bluetooth Dongle Learning & Education Toys with Arduino/Scratch Coding Electronic Sensors Building Robots for Kids Ages 8+ Computer Science Robot kit for Classroom
- 【Learning & Education Robots For Kids】The Makeblock mBot robot kit was designed for beginners to learn coding in a simple and fun way. Bluetooth....
- 【Multi-modules Car Kit with Remote Control】The mbot robotics kit contains various electronic modules including Bluetooth modules, ultrasonic....
- 【Coding Software Platform for Beginners 】The drag-and-drop software provides an intuitive way for kids to learn coding. With the mBlock Blockly....
- 【Infinite Creative Robot with Add-on Packs】The mBot STEM robot kit has an open-source system that ensures rich and engaging add-on pack play and....
- 【A Perfect Gift of Wireless Programming Robot for Kids at Home and School】Being well packaged, mBot is made of high-strength 6061 Aluminum alloy....
Check StockStarTech.com PCI Express Gigabit Ethernet Fiber Network Card w/Open SFP - PCIe GbE SFP Network Card Adapter NIC - Fiber Optic SFP Adapter (PEX1000SFP2)
- Connect a PCI Express-based desktop or rackmount PC directly to a fiber optic network using the Gigabit SFP of your choice.
- PCIe GbE Fiber Network Card with Open SFP Slot.
- Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.
- No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.
- Fits into full or low-profile/small form factor (SFF) systems, with a dual profile design.
- Compatible with most Gigabit SFP modules.
- Supports Full/Half-duplex Auto-Negotiation, Auto-MDI/MDIX.
- Includes low-profile/half-height installation bracket.
- Compliant with IEEE802.3z 1000Base-SX/LX, IEEE 802.1Q VLAN Tagging, IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.3x full duplex flow control, RFC 1157 SNMP v1.
Check StockACOPOWER 12V 200W Mono Solar Panel for 12V Battery Charging,Singel Panel Only,Off-Grid System, (HY1x200W-12M)
- 200W Power: Size 54.72 x 27.56 x 1.4 Inch inches.
- High modules conversion efficiency cells. Monocrystalline modules provide for the highest efficiency rate..
- Advanced encapsulation material with multi-layered sheet minimizations enhances cell performance and provides a longer service life. Corrosion-resistant aluminum frame allows extended outdoor use. Glass is anti-reflective, highly transparent, and low iron-tempered. No hot-spot heating..
- Each solar panel is easy to install via a pre-drilled hole and comes with a 12AWG cable with 35 inches PV male/female quick connectors..
- Durable lightweight anodized aluminum frame and reinforced safety and anti-reflection coated glass. Includes waterproof IP-65 rated Junction box..
- US based company with local support and 5 years equipment and 20 years performance warranty..
Check StockLeviton 41080-4WP QuickPort Wallplate, Single Gang, 4-Port, White
- All Quick Plates have a pleasing matte finish.
- Robust one-piece wall plate and lead-frame jack design.
- Includes captive screws painted to match wall plate color.
- All QuickPlates have a pleasing matte finish.
Check Stock
Twotrees TT-2.5W Laser Engraver,Input Power 7500 mW Engraving Machine, 60% Pre-Assembled,DIY Laser Marking,CNC Laser Engraver Kit Laser Engraving Cutting Machine,Working Size:300x400mm(2.5W Laser)
- 2500mW high intensity laser head, 7.5W Output Power, can engrave different material including wood, plastic, paper, bamboo, ox Horn, leather, sponge paper,etcre motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
- 【60% Pre-installed】Fast assembly, save more time. Open structure motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
- 【Perfectly compatible system】Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10(Use LaserGRBL), Mac OS, and Linux(Use LightBurn)..
- The driver and nano on the motherboard are detachable, can be replaced by other chips or modules.Easy to assemble design,It only connect it to the computer, you can print any pictures your like..
- Package includes: 1pcs Laser Engraver DIY Kit Parts ,1pcs Power supply, 1pcs USB cable ,1pcs Safety glasses..
Check StockSunFounder Raspberry Pi Pico Robot Car Kit Open Source MicroPython App Control RGB LED Electronic DIY Robot Kit for Teens and Adults
- The Pico Car Kit is a fun, Raspberry Pi Pico based, robotics kit for beginners (14+ Teens), and adults who wish to learn Raspberry Pi Pico....
- Raspberry Pico Car has a variety of modules, including ultrasonic modules, grayscale sensors, speed sensors, etc and three 8-bit WS2812 RGB boards.....
- Pico robot building kit can perform obstacles avoidance, object tracking, speed measurement, mileage calculation, line following, and cliff detection.....
- This robotic kit also includes MicroPython code, tutorials, as well as the customizable application SunFounder Controller..
- The Raspberry Pi Pico-4wd robot car kit is completely open source, with diagrams of structure, schematics and source code available..
Check Stock
Syongzida Twotrees TT-5.5 Laser Engraver Machine, Laser Cutter Engraving Machine DIY Laser Wood Engraver 300x400mm (20w Input Power& 5.5w Laser Power)(60% Pre-Installed）
- 【5500mW high intensity laser head】 7.5W Output Power, can engrave different material including wood, plastic, paper, bamboo, ox Horn, leather, sponge paper,etcre motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
- 【60% Pre-installed】Fast assembly, save more time. Open structure motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
- 【Perfectly compatible system】Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10(Use LaserGRBL), Mac OS, and Linux(Use LightBurn)..
- 【Ultra-Fine Compression, Upgraded high-performance fixed-focus laser】Engraving can be done without adjusting the focal length.
- laser power is 5W-5.5W, ultra-fine laser focal area is reduced to 0.23mm^2, The driver and nano on the motherboard are detachable, can be replaced by other chips or modules.Easy to assemble design,It only connect it to the computer, you can print any pictures your like..
- 【Package includes】1pcs Laser Engraver DIY Kit Parts ,1pcs Power supply, 1pcs USB cable ,1pcs Safety glasses..
Check Stock
HyperX Predator DDR4 RGB 16GB 2933MHz CL15 DIMM(Kit of 2) XMP RAM Memory with Infrared Sync Technology Memory - Black (HX429C15PB3AK2/16)
- Dynamic RGB effects - Give your system a boost of power and stunning RGB style.
- HyperX Infrared Sync technology - Easily set up lighting or pattern effects on your memory modules without cables.
- Aggressive aluminum heat spreader - Fierce black heat spreader designed to complement the smooth RGB lighting.
- Intel XMP-ready profiles - XMP-ready profiles designed for Intel's latest chipsetsDescriptionGive your system brilliant RGB style and the performance needed to stay atop the food chain with ultra-fast HyperX Predator DDR4 RGB. Easily set up and show off your unique look thanks to HyperX's Infrared Sync technology, no cables required. Predator DDR4 RGB stays cool while looking great, thanks to the aggressive black heat spreader designed to complement its dazzling light display. Boost your frame rate, keep your streams smooth, and power through your highlight reel rendering with speeds up to 2933MHz and low CL15 latency. It's available in 8GB single modules and kits of 2 and 4 with capacities of 16GB-32GB. The Intel XMP-ready profiles are optimized for Intel's latest chipsets - just select the profile and you're ready to go. 100-percent factory tested at speed, and backed by a lifetime warranty, dependable Predator DDR4 RGB gives you the best of both worl....
Check Stock
Autel Full System Scanner MD802 Maxidiag Elite OBD2 Diagnoses for ABS, SRS, Engine, Transmission,EPB, Oil Reset
- Full systems diagnosis: quickly reads/clears trouble codes on all available systems (including engine, transmission, ABS and SRS) for most of the European, Asian and Domestic vehicles after 1996..
- Full OBD2 functions: fully OBD2 diagnostics and special reset service, such as: including read/erase codes, Live data, freeze frame, retrieving I/M readiness status, O2 monitor test, on-board monitor test, component test, viewing vehicle information, modules Present, DTC look up, EPB, oil reset service..
- Wide vehicle coverage: performs deep vehicle system coverage for all available Electronic systems and access to the body, chassis, power train and on-board communication modules..
- Advanced Features: Enhanced OBD II Mode 6，OBD II code tips guide technicians to the root cause of trouble code faster..
- After sale commitment: free software update for lifetime and one year warranty insurance.
Check Stock
Magnetic Game Controller Necklaces, Matching Necklace for Couples, Best Friend Necklace, Friendship Necklace (White+Gold)
- Fully modular professional gamepad .Box Contents : 1 x ESWAP X PRO CONTROLLER gamepad, 2 x interchangeable mini-stick modules, 2 x interchangeable grip modules, 2 x interchangeable triggers, 1 x interchangeable four-direction D-pad module 2 x additional mini-stick caps, 1 x power cable, 1 x screwdriver for removing the modules, 1 x small storage bag for screwdriver and cable, Quick start guide and warranty information”.
- New next-generation (NXG) mini-sticks: a longer lifespan, and greater precision.
- T-MOD technology and Hot Swap feature lets you swap a module with any other — at any point in a game.
- Extremely high-precision modules and action buttons, with minimal response times.
- Box Contents : 1 x ESWAP X PRO CONTROLLER gamepad, 2 x interchangeable mini-stick modules, 2 x interchangeable grip modules, 2 x interchangeable triggers, 1 x interchangeable four-direction D-pad module 2 x additional mini-stick caps, 1 x power cable, 1 x screwdriver for removing the modules, 1 x small storage bag for screwdriver and cable, Quick start guide and warranty information”.
Check Stock
HONBAY Modular Sectional Sofa U Shaped Couch with Reversible Chaise Oversized Modular Sofa with Ottoman, Caramel Brown
- Comfortable Deep Seating: This modular sofa with a 26" seat depth is suitable for various body types. If you like to lounge back, curl up or sit with your feet up on the sofa, this sectional couch will get you even more comfort.
- Streamlined Tight Back: Experience better support for your entire back than those short frame backrests with cushions. And no need to fluff or adjust, this U-shaped sofa always going to look neat.
- Easy Assembly: With a straightforward design and clear instructions, the modular sofa can be put together effortlessly even for those without previous experience in furniture assembly.
- Storage Ottoman: Tuck items like blankets, pillows, magazines or remote controls into a hidden space. The sectional sofa with storage ottoman helps keep your living room organized and clutter-free.
- Modular Design: This U-shaped sofa consists of several independent modules that can add and rearrange modules at will to match your living space. Easy to transport when disassembled, The modular couch is great for growing families and frequent movers.
Check StockSparkFun XBee Explorer Dongle - Red
- UART communication board, XBee interface, USB interface.
- XBee USB Adapter is a UART communication board which supports XBee connectivity, features UART interface, USB interface, and onboard buttons/LEDs,....
- Test XBee modules: onboard buttons/LEDs for easy testing. Program/Configure XBee modules: make it easy to program/configure the XBee modules....
- USB to UART module: features CP2102, provides UART interface and power output interface, connect it to your system easily.
- Note:The XBee/ZigBee modules and Core2530 (B) in the photos are NOT included..
Check Stock
Patiorama 7 Piece Patio Conversation Set, Outdoor PE Wicker Rattan Sectional Furniture Sofa Set with Beige Seat and Back Cushions, Steel Frame, Espresso Brown
- 【Sturdy & Attractive】Constructed from strong yet lightweight powder-coated steel frame and commercial grade hand weaved polyethylene wicker in Brown creating a whole new look and feel for your patio.
- 【Upgraded Comfort】Comes with 4-inch thick lofty sponge padded seat cushions and back cushions for more comfort and relaxation.
- 【Easy to Clean】All cushions and pillows come with zippered 200g polyester covers which are removable for easy cleaning.
- Removable tempered glass on the table adds more convenience to clean after use and a sophisticated touch as well.
- 【Sectional Sofa Connectors】Including 10 high-quality fasteners preventing movement between modules to maintain the aesthetically good look of your modular patio furniture set.
- Two fasteners are recommended between two adjoining modules.
- 【Rearrange to Any Formation】Comes in individual pieces so that you can lock them together in any formation adding fun to place your furniture (SHIPPED IN 3 BOXES.
Check Stock
