XLBH Optical Fiber Accessories 5PCS/Bag FC UPC Female to Male 15dB Fiber Optic Attenuator FC UPC 15db Female Male Fiber Optic Attenuator Adapter Connector

  • FAST CONNECTION: Quick assembly SC connector can provide quick and easy termination of fibers in the field.
  • EXCELLENT PERFORMANCE: fiber optic adapter has good repeatability, stable performance, high success rate and high reliability.
  • AUXILIARY EQUIPMENT: The attenuator can effectively suppress loop noise, eliminate interference, and prevent accidental damage to the main control terminal.
  • WIDE APPLICATION: optic fiber quick connectors can be widely Used for fiber optical communication system,optical distribution frame (ODF), FTTH, CATV, etc.
  • CERAMIC FERRULE: optic fiber connector built in ceramic ferrule, low insertion loss, wear resistance and long service life.
Check Stock

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

  • ✅【All-in-one OTDR Tester】WANLUTECH MT-8000 combines all necessary fiber optic testing in one handheld device.This OTDR tester includes Optical Time Domain Reflectometer (OTDR:1310nm+1550nm,28dB/26dB,max test distance can up to 110km), Visual Fault Locator (VFL:max test distance 8km), Optical Power Meter (OPM:measurement range -70~+10 dBm), Light Source (CW,270 Hz, 330 Hz, 1 kHz and 2 kHz),Digital Multimeter(DMM) , Optical Loss Test, RJ45 cable test, Event Map, etc..
  • ✅【Professional OTDR Fiber Optic Tester】WANLUTECH OTDR tester uses automatic testing by default, just click to start testing after connecting into the fiber, there is no complicated parameter setting.
  • professional technicians can set the test range, pulse width and other parameters before testing, which will get more accurate curve results.Warning function could prevent OTDR module from being damaged by optical signal in fiber..
  • ✅【Parameters】WANLUTECH multifunctional Single Mode OTDR has 8'' retina touch screen, 2048*1536 resolution. OTDR fiber tester is powered by 7.4V/7000mAh Li-polymer batter with long working time.Interface type:FC-PC.1310nm/1550nm Testing Wavelength and 28....
Check Stock

2 Out 1 in Optical Audio Splitter,Dual Port Optical Audio Cable Adapter,for Splitter Fiber Replacement

  • 1 IN 2 OUT Splitter - This product is a square fiber female interface, which is used for one-in and two-out distribution..
  • Easy to use - It can realize the interchangeability between two devices, and does not need to plug in the fiber optic cable and equipment frequently..
  • For Splitter Fiber Replacement - If a power amplifier has only one fiber interface, and there are two fiber interfaces that need to be connected to the power amplifier, use this adapter to get it..
  • Dual Port Optical - Use it to reduce the device interface interruption caused by frequent device plugging..
  • Note: It isn't suitable for TV. No need to change the line when using this adapter, so the interface will not be damaged..
Check Stock

RiteAV - Direct Burial/Outdoor LC-LC 2-Strand Fiber Optic Cable - Multimode (50/125) - 75M (246ft)

  • ...tion: 5m(16ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
  • The model of this fiber is a 5m- 16ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connec....
Check Stock

Fibergaga-1m(3ft) OS2 SC/APC to SC/APC Fiber Patch Cable Single Mode Fiber, Simplex, Length Option: 0.5M(1.6ft)-75M(246ft) 9/125μm Fiber Optic Cable

  • fiber information: 1m(3ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
  • The model of this fiber is a 1m- 3ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connector, with low signal loss, can be used more safely..
  • We have focused on optical fiber jumpers for 15 years. Each cable is ....
Check Stock

Single Mode LC Gigabit Fiber Media Converter - Includes LC SFP 20 km 12.42 Miles LC – to UTP Cat5e Cat6 10/100/1000 RJ-45 – Auto Sensing Gigabit or Fast Ethernet Speed - Jumbo Frame - LLF Support

  • AUTOMATICALLY adapts to 10 Mbit/s, 100 Mbit/s (Fast Ethernet) or 1000 Mbit/s (Gigabit) Speed And Extends it over Single Mode Fiber to up to 20 km –....
  • Supports Dual Speed Fiber Mode (configurable by dip switch) – Select 1000Base-LX (default setting) or 100Base-LX – interconnecting with existing....
  • SUPPORTS Jumbo Frame & LLF feature - for increased end-to-end TCP performance for media converter fiber unit and end point smooth interconnection.
  • PLUG & PLAY Fiber Media Converters - Simply plug in an optical LC port and UTP RJ-45 port, and it will work immediately.
  • FREE UTP Cat5e Patch Cable (1m - 39in) Comes In The Set With Every Unit! - Colors May Vary Depending on Stock.
Check Stock

6 Pcs Fiber Optical Tool Accessory Fiber Sleeve Core Spare Ceramic Inserts and Mental Heads for Visual Fault Locator Fiber Cable Tester

  • It is suitable for connecting home butterfly cable.
  • Using V groove butt joint technology mature, applicable to the multimode optical fiber connection.
  • Free offixture design, operation time less than a minute.
  • For fiber optic butting optical fiber or optical fiber butt pigtail, this is to do joint,.
  • (butting optical fiber pigtail pigtail fiber core refers to head butt fiber and pigtail instead of the former said), for the cold connection thing called optical fiber cold sub..
Check Stock

VIMVIP 3 Way in/Out Digital Toslink Optical Audio Splitter Manual Switch with 2.6ft Fiber Optic Cable-Black

  • Optical Splitter 1 to 3: This Firber Optic Splitter Adapter can spits into 3 female Toslink, Compatible with Male Toslink cables..
  • 1 to 3 In/Out: Two ways you can choose, connect one signal digital audio sources input to three digital audio output or three toslink optical audio input signals switch to one toslink optical output. Switching with ease by just turning the selector dial but only one can be selected at a time..
  • Application: Compatible with HDTV, Blu-ray DVD player, PCM, Dolby Digital, DTS, XBOX360, PS3 to home theater, expands the capacity of a home theater's A/V Inputs. PCM, Dolby Digital DTS signals can pass through this unit. Bring you more convenience..
  • This Optical Splitter Switcher can be used to connect 3 digital input devices together by Toslink connection to one input on the destination audio player, speaker, amplifier, receiver, HDTV or home theater system, output connects directly into TV Of home theater receiver.Let you enjoying your leisure time..
  • What You Get: VIMVIP 3 Way In / Out Digital Toslink Optical Audio Splitter Manual Switch with 2.6ft Fiber Optic Cable-Black and our Our fan-favorite 12 months warranty and friendly customer service..
Check Stock

Digital Toslink Fiber Optical Audio Splitter Cable 1 in 2 Out HOSONGIN Toslink Fiber Optic Adapter Cable Fiber Converter Digital Optical Audio Adapter Cable

  • Toslink Fiber Optical Audio Splitter 1 in 2 Out: HOSONGIN Toslink Fiber Optical Audio Splitter supports 1 male input to 2 female outputs, you can....
  • Toslink Fiber Optical Audio Switch 2x1: You can connect 2 female inputs and 1 male output. When using one device of the female inputs, you only need....
  • Enjoy Excellent Sound Experience: HOSONGIN Toslink Fiber Optical Audio Splitter adopted 24k gold connector, High quality low-loss Fiber optic core and....
  • Wide Application: HOSONGIN Toslink Fiber Optical Audio Splitter ideal for connecting your TV, digital TV set-top box, CD/DVD player, PS3/PS4/Xbox....
  • Great Product & Perfect Service: HOSONGIN Toslink Fiber Optical Audio Splitter is solid comes no extra power is needed. Package include: 1 x HOSONGIN....
Check Stock

FPVDrone 222mm-HD FPV Racing Drone Frmae 5 inch Carbon Fiber Frame Fit DJI FPV System

  • Full 3K Carbon Fiber airframe with chamfered arm..
  • Optimized weight distribution: DJI unit and Stack centered.
  • With TPU parts, and battery anti-slip pads..
  • Light weight, small size, easy to assemble..
Check Stock

Digital Optical SPDIF Audio Extender Over CAT5/CAT6 Cable Kit

  • Cost-effective solution for extending the digital S/PDIF audio using single low-cost Cat5e or Cat6 cable for up to 500 feet or 150 meters away from....
  • Send your Dolby 5.1 or DTS surround sound audio over cat5/cat6 cable for long range setup. Audio transmitted digitally with no signal loss..
  • Digital audio S/PDIF performance sampling rate 96 kHz. Dual digital audio inputs: 1 optical input and 1 coaxial input..
  • Works with all industrial grade Category 5/5e/6 cables. Clear digital audio sent over long distance as if connected locally with no loss on the sonic....
  • Make out-of-the-way connections for further distribution and integration. Unit can be powered through the supplied DC adapter or optional USB....
Check Stock

Blackmagic Design Mini Converter Optical Fiber 12G

  • SDI Video Inputs: 1 x SD, HD and 12G-SDI Video and 1 x Optical Fiber Input..
  • SDI Video Outputs: Automatically matches the SD, HD and 12G-SDI video input on the Optical Fiber..
  • Optical Fiber Video Inputs: 1 x 10 bit SD/HD/12G- SDI switchable..
  • Optical Fiber Video Outputs: Automatically matches the SD, HD and 12G-SDI video input..
  • Multi Rate Support: Auto detection of SD, HD or 12G-SDI..
Check Stock

Fiber Optic Drop Cable Stripper for FTTH Drop Cables (Stripping Plier for Rubber-insulated Optical Cable) and CFS-3 Fiber Optic Stripper ( 3 Port Hole Fiber Optic Stripping Tool ), Fiber Tool Kit

  • 【FTTH Cable Striping Plier】The blade is sharp, which can easily strip the thread. It will not damage the optical fiber core when stripping the outer cable. The blade is not exposed, and it can prevent blunt objects from colliding with the blade and causing damage to the blade. It also can prevent the blade from scratching the user. 2.4-inch scale ruler, which is clear to ensure the accuracy of the peeling length. You can choose the peeling length you need. Easy to use, increase work efficiency..
  • 【FTTH Cable Striping Plier Applicability】Adaptive range: Indoor 3mm (W) * 2mm (H) optical cable.
  • Adaptive optical fiber: 1/2 core optical fiber.
  • Adaptive coating diameter of optical fiber: Φ0.25mm & Φ0.9.
  • Adaptive cladding diameter of optical fiber: 125μm..
  • 【CFS-3 Fiber Optic Stripper】 For stripping 250 micron buffer coating from 125 micron optical fiber,All stripping surfaces are manufactured to precise tolerances to assure clean,smooth strips. Precision Diameter Hole & V-Opening in Blade allow for accurate buffer coating removal,Every fiber stripping tool is tested after production to ensure a consistent high quality cut out of the box..
  • 【CFS-3 Stripper Three-port design】Hole (1) 2 - 3 mm fiber jacket cuts down to the 600 - 900 micron buffer....
Check Stock