Categories

Best Optical Fiber Module

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

  • ✅【All-in-one OTDR Tester】WANLUTECH MT-8000 combines all necessary fiber optic testing in one handheld device.This OTDR tester includes Optical Time Domain Reflectometer (OTDR:1310nm+1550nm,28dB/26dB,max test distance can up to 110km), Visual Fault Locator (VFL:max test distance 8km), Optical Power Meter (OPM:measurement range -70~+10 dBm), Light Source (CW,270 Hz, 330 Hz, 1 kHz and 2 kHz),Digital Multimeter(DMM) , Optical Loss Test, RJ45 cable test, Event Map, etc..
  • ✅【Professional OTDR Fiber Optic Tester】WANLUTECH OTDR tester uses automatic testing by default, just click to start testing after connecting into the fiber, there is no complicated parameter setting.
  • professional technicians can set the test range, pulse width and other parameters before testing, which will get more accurate curve results.Warning function could prevent OTDR module from being damaged by optical signal in fiber..
  • ✅【Parameters】WANLUTECH multifunctional Single Mode OTDR has 8'' retina touch screen, 2048*1536 resolution. OTDR fiber tester is powered by 7.4V/7000mAh Li-polymer batter with long working time.Interface type:FC-PC.1310nm/1550nm Testing Wavelength and 28....
Check Stock

SFP+10GBASE-T Transceiver Copper RJ45 10Gbe SFP Module Compatible for Cisco SFP-10G-T-S, Meraki MA-SFP-10G-T, MikroTik, Unifi, Netgear, QNAP, Supermicro, Cat6a/ Cat7, 30m

  • [Data Rate] 10G, multi-rate (The switch optical port must be support 10G, the optical port on the other switch end can support multi rate). 10G SFP+ to RJ45 Copper module for CAT6A/7/8 cable, copper RJ-45 connector. Supports 1000Mbps rate for using Cat 5e cable or better. (30 meters via 10Gbps, 50 meters via 5Gbps and 2.5Gbps, 100 meters via 1000Mbps.).
  • [Wide Compatibility] Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Netgear AXM765, D-L ink DEM-440XT, Mikrotik, Supermicro, and Other Open Switches..
  • [Easy to Use] Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports..
  • [High Quality] All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch..
  • [After-sales Service] 30-day free return, 3-year warranty, lifetime technology support. QSFPTEK is a manufacturer of transceiver. We offer many compatible options. If you are not sure about the compatibility of your device, please feel free to conta....
Check Stock

Anise Star Car LED Interior Strip Lights, RGB 16 Million Colors 5 in 1 Change with The Music, 236\ Optimum Length, Automobile Ambient Neon Lighting Kit -Bluetooth APP Control and Remote Control

  • ...u like from 16 million colors. There are 29 built-in preset modes, you can turn on or off the lights through the APP, dim or brighten, and even adjust the mode speed. As for remote control, it has 20 buttons can switch to any color with the sensitive signal receiver..
  • (5-in-1 DESIGN+DIY): The length of the installed Optical fiber is 236 inchs with 5-in-1 design. You can cut it into 3-5 strips, and then install optical fibers in the gaps between the four doors and the dashboard, without glue, to create a wonderful atmosphere..
  • (COLORS CHANGE WITH THE MUSIC): One click to adjust colors of the light, and the lights gradually change colors with the rhythm of the music playing on the phone, the color and color temperature(CCT) will be changed according to the external sound. Great for Car decoration, House decoration, Christmas decoration, stage decoration, holiday party, night lighting, etc..
  • (SERVICE LIFE 50000 HOURS): The LED car interior lights has a working voltage of 12V, equipped with short circuit protection and memory function. Universal for all cars and trucks. The service life is more than 50,000 hours, Plug and Play..
  • (PRODUCT MATERIAL): The strip light is using 2W RGB light source, 3MM diameter solid core with skirt type, aluminum connector, cust....
Check Stock

RiteAV - Direct Burial/Outdoor LC-LC 2-Strand Fiber Optic Cable - Multimode (50/125) - 75M (246ft)

  • ...tion: 5m(16ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
  • The model of this fiber is a 5m- 16ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connec....
Check Stock

Fibergaga-1m(3ft) OS2 SC/APC to SC/APC Fiber Patch Cable Single Mode Fiber, Simplex, Length Option: 0.5M(1.6ft)-75M(246ft) 9/125μm Fiber Optic Cable

  • fiber information: 1m(3ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
  • The model of this fiber is a 1m- 3ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connector, with low signal loss, can be used more safely..
  • We have focused on optical fiber jumpers for 15 years. Each cable is ....
Check Stock

4 Pack 1.25G 850nm Multimode SFP LC Transceiver Fiber Module 550 Meters 1000Base-SX LC MMF for Cisco GLC-SX-MMD/SX-MM/SFP-GE-S,Fortinet,Ubiquiti UniFi UF-MM-1G,Mikrotik S-85DLC05D Meraki MA-SFP-1GB-SX

  • ...ngle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function..
  • Low Power Consumption: The power consumption is only less than 1watt, that can save costs wisely. GESD will always provides innovative and cost-effective optical networking solutions. Each sfp module is individually done test before packing..
  • Widely Used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gb SFP ports.★ Compatible with MSA compliant equipment Cisco Meraki,Ubiquiti,D-Link, Supermicro,TP-Link,Broadcom,Linksys and Huawei,Mikrotik,Netgear,Supermicro Other Open Switches..
  • If you are not sure about the compatibility of your device, please feel free to contact us for customized SKU to meet your needs(We offer many compatible options). ★After-sales Service:30-day free return,3-year warranty,lifetime technology support.We produce high quality transceivers,every transceiver has been tested for 28 steps before shipping..
Check Stock

TP-LINK Gigabit SFP module, 1000Base-SX Multi-mode Fiber Mini GBIC Module, Plug and Play, LC/UPC interface, Up to 550/220m distance (TL-SM311LM)

  • Multi-Mode MiniGBIC module, Supports full-duplex.
  • Wave Length: 850nm. Data Rate: 1.25Gbps. Port Type: LC/UPC.
  • Max. Cable Length: 550m(1,800 feet) using 50/125um Multi-Mode Fiber, 220m(720 feet) using 62.5/125um Multi-Mode Fiber.
  • Always keep the protective dust plug on the SFP’s optical bores until you are ready to make a connection.
  • Compatible with all SFP ports on TP-Link product including JetStream switches, and media converter MC220L.
  • Work with MC200CM with multi-mode fiber connection.
Check Stock

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

  • ✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
  • ✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • ✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
  • ✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
  • ✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..
Check Stock

GiTi SFP 10G SFP+ DAC Cable, 10GBASE-CU Twinax SFP+ Cable Direct Attach Copper(DAC) Passive Cable Cisco Compatible for SFP-H10GB-CU0.5M Ubiquiti D-Link Supermicro Netgear Mikrotik, 0.5m (1.64ft)

  • Product Feature: 10Gb SFP+ to SFP+ DAC twinax passive cable 0.5m(1.6ft). 30AWG. High quality chip, fast transmission and low power consumption. All sfp+ dac cables come with dust cover and anti-static packaging..
  • Strict Quality Test: Each DAC cable must pass the signal integrity test and compatibility test before shipment. Compliant to SFP+ MAS, SFF-8432 and RoHS compatible. I/O Connector designed for high speed differential signal applications..
  • Widely Compatible: GiTi SFP 10Gbase sfp+ dac cable is compatible for Cisco SFP-H10GB-CU0.5M, Meraki, Ubiquit, Mikrotik, Intel, Fortinet, Netgear, D-Link, TP-Link, Linksys, Broadcom, Zyxel, etc..
  • Cost-saving & Effective: 1*twinax cable + 2*SFP+ connectors is equivalent to a 2*10G sfp+ optical module plus an optical fiber jumper, budget-saving, environmental-friendly, stability and durability, no need to expose interfaces and repeated plugging and unplugging..
  • Applications: 10g sfp+ cable is widely used in fiber switch, router, server,firewall, NIC, media converter, data centers, storage area networks, network attached storage, and other fiber optic equipments with SFP+ ports etc..
Check Stock

6 Pcs Fiber Optical Tool Accessory Fiber Sleeve Core Spare Ceramic Inserts and Mental Heads for Visual Fault Locator Fiber Cable Tester

  • It is suitable for connecting home butterfly cable.
  • Using V groove butt joint technology mature, applicable to the multimode optical fiber connection.
  • Free offixture design, operation time less than a minute.
  • For fiber optic butting optical fiber or optical fiber butt pigtail, this is to do joint,.
  • (butting optical fiber pigtail pigtail fiber core refers to head butt fiber and pigtail instead of the former said), for the cold connection thing called optical fiber cold sub..
Check Stock

Bi-Di Gigabit Singlemode SC Fiber Media Converter 1000M Single SC to 10/100/1000M RJ45 Built-in Singlemode Module SMF 1310/1550nm 20km 12.42 Miles -1 Pair

  • ❤【1000M Single SC Fiber Port】 Built-in 1000Mbps Single-mode Fiber Module with Single SC ports, link Single-mode Single SC Fiber cable, SMF, up....
  • ❤【10/100/1000M RJ45 Port】Provide speed up to 1000Mbps stable Eternet connection, downward compatible with 10/100 Mbps, Supports Full Duplex or....
  • ❤【Plug and Play】 Just plug in Optical port and RJ45 port, and will work immediately. Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z,....
  • ❤【Sturdy and Durable】High-quality chip provides lightning protection, strong anti-interference ability. 2 sides Cooling holes and Metal Case for....
  • ❤【What you get】 1x pair Bidi Gigabit SC to RJ45 Media Converter, 2x external power supply, 1x Product Manual. Enjoy 30-day free-returned and....
Check Stock

Digital Toslink Fiber Optical Audio Splitter Cable 1 in 2 Out HOSONGIN Toslink Fiber Optic Adapter Cable Fiber Converter Digital Optical Audio Adapter Cable

  • Toslink Fiber Optical Audio Splitter 1 in 2 Out: HOSONGIN Toslink Fiber Optical Audio Splitter supports 1 male input to 2 female outputs, you can....
  • Toslink Fiber Optical Audio Switch 2x1: You can connect 2 female inputs and 1 male output. When using one device of the female inputs, you only need....
  • Enjoy Excellent Sound Experience: HOSONGIN Toslink Fiber Optical Audio Splitter adopted 24k gold connector, High quality low-loss Fiber optic core and....
  • Wide Application: HOSONGIN Toslink Fiber Optical Audio Splitter ideal for connecting your TV, digital TV set-top box, CD/DVD player, PS3/PS4/Xbox....
  • Great Product & Perfect Service: HOSONGIN Toslink Fiber Optical Audio Splitter is solid comes no extra power is needed. Package include: 1 x HOSONGIN....
Check Stock

1G SFP SX for Cisco LC-SX-MMD GLC-SX-MM SFP-GE-S Ubiquiti unifi UF-MM-1G Netgear AGM731F D-Link DEM-311GT ZTE SFP-GE-M500 Extreme MGBIC-LC01 1000BASE-SX SFP 850nm 550m DOM Transceiver Module…

  • 【1000BASE-SX】SFP to LC Optical Gigabit Ethernet transceiver module 1.25Gbps SFP Mini -GBIC, Multi-mode 850nm LC duplex connector DDM 550m..
  • 【1GB SFP】For Cisco 1.25 Gigabit Ethernet 1000BASE-SX standards (coding as Cisco LC-SX-MMD GLC-SX-MM SFP-GE-S ).
  • 【1G SFP Module】SFP Transceivers Compatible Cicso meraki with Gigabit Ethrnet , up to 550m for MMF transmission, compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions ,specified in IEEESFF-8472 MSA Compliant, IEEE 802.3ah-2004.
  • 【 Easy to Use 】installation, plug and play, fully hot-pluggable. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with SFP ports..
  • 【3 WARRANTY】30-Days Free-returned, 65-Days Free-replacement, 5-Years Free-maintenance,Fibermall supports regular custom service for your options..
Check Stock