Best Optical Jumper

ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino

It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient..
Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A.
RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move.
With optical coupling isolation, triggering more reliable, more stable..
EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper..

Check Stock

FiberCablesDirect - 3M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 10/40/100gb mmf sfp+ 100gbase dplx ofnr om4-lc-lc

Fiber Cable Description: OM4 LC LC Fiber Patch Cable 3M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries..
Fiber Patch Cable Details: 3 Meter (9.84 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) |....

Check Stock

FiberCablesDirect - 3M OM3 LC LC Fiber Patch Cable | 10Gb Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1g 10g 40g lc-lc dplx mmf 10gbase sfp+ Aqua ofnr lommf

Fiber Cable Description: OM3 LC LC Fiber Patch Cable 3M | 10Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries..
Fiber Patch Cable Details: 3 Meter (9.84 feet), 1/10/40Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM3 Ethernet Over Multimode Fiber: 1500 / 2000 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 300m | 40Gb Ethernet 40GBase-SR4 100m (330m QSFP+ eSR4) | 100G....

Check Stock

FiberCablesDirect - 2.5M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC to LC Multimode Jumper 2.5 Meter (8.20ft) | Length Options: 0.5M-300M | 10/40/100gb mmf sfp+ 100gbase dplx ofnr om4-lc-lc

Fiber Cable Description: OM4 LC LC Fiber Patch Cable 2.5M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries..
Fiber Patch Cable Details: 2.5 Meter (8.20 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR....

Check Stock

FiberCablesDirect - 3M OM4 LC LC Fiber Patch Cable | Bend Insensitive Plenum 100Gb Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 10/40/100g mmf lc-lc om4-lc-lc

Fiber Cable Description: OM4 LC LC Bend Insensitive Plenum Fiber Patch Cable 3M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries..
Fiber Patch Cable Details: 3 Meter (9.84 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Bend Insensitive, Plenum, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | ....

Check Stock

Jumper Pak for N64, Replacement Memory Jumper Pak Pack for Nintendo 64 N64 Game Console

[Jumper Pak Pack] This jumper pack is compatible with Nintendo 64 game console..
[Paly any Games for NINTENDO 64] The jumper pack helps you play any games that do not need memory expansion..
[Plug and Play] This jumper pack don't need any drivers, just plug and play..
[Essential Spare Jumper Pak] This jumper pack is very suitable to replace your broken or misplaced jumper Pak, to install this jumper pak, you can plug into the console's memory expansion port..
[Note] Please note that this regular jumper pak has no memory expansion function, only a little memory function to facilitate the next time you turn it on and return to the last game level..

Check Stock

FiberCablesDirect 4Pk 1M OS2 LC LC Single Mode Fiber Patch Cables - 4 Pack | Duplex 9/125 LC to LC Singlemode Jumper Cord 1 Meter (3.28ft) | Pack Options: 2, 4, 6, 10, 12, 24 | Patch-Cord lc-lc

4-Pack Fiber Cable Description: OS2 LC to LC Fiber Patch Cables, 1 Meter | Duplex LC LC Singlemode Fiber Patch Cable 9/125 Corning optical fiber core/cladding. Ceramic ferrule LC to LC fiber patch cable connectors. High bandwidth optical fiber for high speed, low loss, data transmission. Yellow 2.0mm outer diameter, PVC, OFNR jacket with zip-cord. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 4 pack – 1 Meter (3.28ft), SMF, Zip-Cord Reinforced, Singlemode LC to LC Fiber Patch Cable, Fiber Jumper Cords..
Fiber Cable Assembly: OFNR, Yellow Colored, 2.0mm outer diameter, riser rated, os2 fiber patch cable..
Core / Cladding: 9/125µm Corning Optical Fiber – 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Patch Cable Rating: OFNR Riser Rated Singlemode Duplex Fiber Opt....

Check Stock

THOVSMOON Toddler Kids Gingham Seersucker Flotation Device Cover Baby Swim Puddle Jumper Cover Life Jacket/ Life Vest (Blue)

【Material】:seersucker fabric, gingham fabric..
【Features】:The Seersucker Puddle Jumper Cover are designed to fit your child's puddle jumper flotation device. Perfect for covering up a design that doesn't interest you, to cover an older/faded puddle jumper, or to spruce up a puddle jumper .Seersucker Puddle Jumper Covers will enhance the look of a puddle jumper instantly..It fits the Coleman 30-50 LBS puddle jumper life jacket, it may fit other brands as well.DOES NOT INCLUDE FLOTATION DEVICE..
【Size】:Weight is suit for 30-50 pounds puddle jumper..
【Security Warning】:Cover does have additional clasps sewn on in the back, however, we recommend using the ORIGINAL clasps that are sewn on to the actual personal flotation device in addition to the ones on the cover.careful adult supervision of children near water is the best protection against drowning..
【Package】:1*Seersucker flotation device cover,Do not include flotation device,Can be monogrammed by yourself..

Check Stock

FiberCablesDirect - 0.5M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 0.5 Meter (1.64ft) | Length Options: 0.5M-300M | 1g 10g sfp+ 10gbase lc/lc dplx Yellow PVC ofnr lc-lc

Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 0.5 Meter | 10Gig Duplex Single Mode fiber optic cable, 9/125 Corning optical fiber, yellow, OFNR (riser rated), 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 0.5 Meter (1.64 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflec....

Check Stock

FiberCablesDirect - 12M OM1 LC LC Fiber Patch Cable | 1G Plenum Duplex 62.5/125 LC to LC Multimode Jumper 12 Meter (39.37ft) | Length Options: 0.5M-300M | Made In USA | 1/10g mmf sfp 1gbase ofnp lc-lc

Fiber Cable Description: OM1 LC to LC Plenum Fiber Patch Cable 12 Meter | OFNP Duplex LC LC Multimode Fiber (MMF) Patch Cable 62.5/125 Corning optical fiber core/cladding. Ceramic ferrule LC fiber connectors. High bandwidth fiber for high speed, low loss, data transmission. Orange, 2.0mm outer diameter, zip-cord reinforced, jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 12 Meter (39.37 feet), Duplex (2 fiber), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic cor....

Check Stock

FiberCablesDirect - 1M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dplx yellow zip-cord pvc ofnr lc-lc

Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 1 Meter | 10Gig Duplex Single Mode fiber optic cable, 9/125 Corning optical fiber, yellow, OFNR (riser rated), 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 1 Meter (3.28 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) ....

Check Stock

Aoicrie Jumper Wire Kit, 840 Pieces Preformed Breadboard Jumper Wire Kit,14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

This kit is the most complete Breadboard Jumper Wires set which contains high quality assorted U-Shape Jumper Wires, assorted solderless flexible jumper cables, tweezer, with which you can do all kinds of circuit experiments..
2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm. Note: The kit may also be equipped with a 26AWG jumper..
Easy to use : each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard ,all the colored jumper wire are pre-stripped and preformed right-angled, easy to insert it into breadboard..
Wide Application : designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects these breadboards wires are ideal for use with any breadboard, prototyping, prototype circuits, LED strip, test circuits and etc..
Package includes : contains 840 pieces U shape preformed breadboard jumper wire kit, 14 lengths, 60 pieces per size,Note: the breadboard wire is a little soft that convenient for changing its shape to do connect test.
if you find that it can't be inserted, please check whether the cable in the pin hole of a breadboard is in good condition or not.come with a f....

Check Stock

Lisle 56810 Relay Test Jumper Kit

Set includes four jumpers to fit the most popular size relays on domestic and import vehicles.
simply remove relay to be tested, insert correct jumper and insert relay into jumper.
When using green four pin jumper be careful to align pins on jumper and relay correctly.
Jumpers have tabs for clamping and flat pads to place test leads on.
Set comes in blow-molded case for storage.
No need to pierce wires or connect multiple jumper wires.

Check Stock