Categories

Best Optical Multiplex Fiber Splicing

Fiber Optic Fusion Splicer with 4.3-inch Touch Screen, Optical Fiber Fusion Splicer Kit Features 7s Splicing and 18s Heating- 6481 Series

  • Key Technical Facts Matter – 1) 4 high precision motors.
  • 2) 7s fast splicing, 18s highly efficient heating.
  • 4) 5mm fusion for ultra-short cleave length.
  • 6) 300 groups of splice modes, 100 groups of heating modes, 10000 groups of fusion records storage.
  • Easy to Operate, Wide Compatibility – 1) 4.3-inch touch screen with graphical interfaces for smooth operation.
  • 2) All-in-one fixture meets fusion demands of multiple optical fibers, jumpers and rubber-insulated wires.
  • 4) Multiple fusion modes and heating modes are available.
  • Other Features – 1) High Precision Ceramic V-groove and ceramic presser foot, ensure fiber loading becomes more convenient and accurate, also easy for clean and maintenance.
  • 2) Intelligent Heat Shrink, the heater won’t work until the fiber is detected by the embedded sensor to avoid scalding.
  • Pluggable large-capacity lithium-ion battery – 6800mAh built-in battery satisfies 220 times of splicing and heating, good for longer field work.
Check Stock

Jonard Tools RST-8514 FTTH Riser Cable Slitting Tool

  • [Professional Design]: Fibrlok Fiber Optic Mechanical Splice is designed to accommodate 250-900µm buffer sizes..
  • [Features]: Fibrlok Fiber Optic Mechanical Splice is known for its low reflection characteristics of -35dB and has a thermal stability of -40°C to 80°C.
  • [Easily installed]: High rate of success for installation and easy installation, the average connecting time is 150 seconds.
  • [Application]: Applicable for optical fiber splicing and restoration for damaged lines.
  • fiber axial solid fit, reducing the performance degradation caused by the loss of matching fluid.
Check Stock

Cuifati 2x2 Hd Multimedia Interface Splitter, 1 Input 4 Outputs2x2 Led Video Wall Controller, Hd Output 2x2 Tv Video Wall Controller, It Can Effectively Improve The Signal, Plug and Play(#3)

  • Optical fiber audio independent output, can be connected to audio.
  • Plug and play, realize multiple splicing methods according to scene requirements.
  • Automatically calculate the best resolution of the output image and transmit it to the display.
Check Stock

Signal fire New Model AI-9 Fusion Splicing Six Motor Core Alignment Fiber Fusion Splicer Automatic FTTH Fiber Optical Welding Splicing Machine Splicing 5S Heating15S

  • 【Faster Splicing & Heating】- The fusion splicing machine uses a powerful high-speed motor that allows fast 5 second splice time and 15 second heat time, continuous splice and heats about 240 times. And it saving engineers time..
  • 【3-in-1 Fiber Holder】- 3 In 1 Fiber Holder suit for SM(G. 652&G. 657)、MM (G. 651)、DS(G. 657)、NZDS (G. 655), bare fiber, pigtail, rubber-insulated, multi fiber cable.
  • Splice Loss: 0.025dB (SM) 、0. 01dB (MM) 0. 04dB (DS/NZDS)..
  • 【Built-In Power Meter & VFL】- Using the latest core alignment technology with auto-focus and six motors. It is more precise and less splicing loss than cladding alignment technology. Effectively measure connection loss,verify continuity and help assess fiber link transmission quality..
  • 【Clear LCD & Long Time Standby】- With 5-inch high-resolution screen, it is up to 300 times the focus magnifications when X/Y Axis displayed separately, 150 times focused magnifications when X/Y Axis Displayed Simultaneously. 7800 mah high-capacity lithium battery, charging time ≤ 3.5 hours, continuous splicing and heating about 240 times..
  • 【Intelligent Interaction】- This splicing heating machine can be connected to mobile app, ten different languages can be switched lito English, French, Russia, I....
Check Stock

TEKONSHA P2 PRODIGY BRAKE CONTROL + WIRING HARNESS FOR 99-02 CHEVY SILVERADO GMC SIERRA SUBURBAN TAHOE CONTROLLER + PLUG/PLAY WIRE KIT.

  • Activates a trailer's stop/turn/tail/running lights without cutting or splicing into your vehicles wiring system - simply snap on included current....
  • Use when: trailer has more than 1 light assembly per side and is equipped with multiple clearance or running lights.
  • Re-settable short circuit/overload protection - guards itself and the tow vehicle from shorts and wiring install mishaps.
  • Works on all vehicle types including standard, PWM and/or multiplex systems, ensuring full brightness of the trailer lights during operation.
  • ZCI sensor technology and direct connection to the tow vehicle battery, eliminates all electrical connection and interference with the tow vehicle....
Check Stock

Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit

  • Activates a trailer's stop/turn/tail/running lights without cutting or splicing into your vehicles wiring system - simply snap on included current sensors.
  • Use when: trailer has more than 1 light assembly per side and is equipped with multiple clearance or running lights.
  • if tow vehicle may tow a variety of trailers.
  • Re-settable short circuit/overload protection - guards itself and the tow vehicle from shorts and wiring install mishaps.
  • rated at 4.2 amps for turn/stop circuits, 7.5 amps for taillight circuit.
  • Works on all vehicle types including standard, PWM and/or multiplex systems, ensuring full brightness of the trailer lights during operation.
  • ZCI sensor technology and direct connection to the tow vehicle battery, eliminates all electrical connection and interference with the tow vehicle electrical system.
  • Isolates trailer light operation from tow vehicle's electrical system.
  • 5 amps for taillight trailer circuits. Works with low side Switched vehicles.
Check Stock

18 in 1 FTTH Fiber Optic Tool Kit with FC-6S Cleaver Optical Power Meter Visual Fault Locator Finder Cable Cutter Stripper 5km

  • PRECISE CLEAVING: Provides a cleave with a cutting angle of less than 0.5° for optimal fiber preparation for fusion splicing.
  • BUILT-IN FIBER HOLDER: The fiber cleaver can hold 250µm and 900µm fiber with a readable scale for accurate cleave lengths from 5 to 20mm and also has a built-in trash can for easy disposal.
  • VERSATILE USE: Ideal for field splicing applications, splicing trucks, laboratories, fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice.
  • HIGH DURABILITY: Lightweight and rugged design for longer life and increased durability.
  • REPLACEMENT BLADES: Replacement blades (Part#: FC-500RB) available.
Check Stock

D YEDEMC SM&MM Automatic Intelligent Optical Fiber Fusion Splicer Optical Fiber Welding Splicing Machine (Ai-9) & Fiber Cleaver Kit …

  • 3 In 1 Fiber Holder suit for SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable.
  • Splice Loss:0.025dB(SM)、0.01dB(MM)、0.04dB(DS/NZDS).
  • Fiber diameter:Cladding Diameter：80-150μm、Coating Diameter：100-1000μm.
  • Fiber Cleave Length:Coating less than 250µm：8-16mm、Coating less than 250-1000µm:16mm..
  • Built-In power meter (Wavelength 850nm/1300nm/1310nm/1490nm/1550nm/1625nm).
  • Built-in Visual Fault Locator:Power:15mw,2hz flashing And Constantly Bright Mode..
  • With 5-inch 800x480 high-resolution screen, is up to 300 times focus magnifications.
  • 5s fast splicing 15s fast heating.Once splicing reaches to 50,000 times free replacement a new machine.
  • Through the phone app, splicing is easy to operate.10 Languages to switch freely :English,french,Russion,Italian,Portuguese,Polish,Spanish,Thai,Arabic.
  • Lifetime Friendly Customer Service,if have problem,pls contact us using the amazon message box,we will solve your problem in time and must give you a satisfactory solution .At the same time,you also need a little patience..
Check Stock

RiteAV - Direct Burial/Outdoor LC-LC 2-Strand Fiber Optic Cable - Multimode (50/125) - 75M (246ft)

  • ...tion: 5m(16ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
  • The model of this fiber is a 5m- 16ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connec....
Check Stock

Fibergaga-1m(3ft) OS2 SC/APC to SC/APC Fiber Patch Cable Single Mode Fiber, Simplex, Length Option: 0.5M(1.6ft)-75M(246ft) 9/125μm Fiber Optic Cable

  • fiber information: 1m(3ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
  • The model of this fiber is a 1m- 3ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connector, with low signal loss, can be used more safely..
  • We have focused on optical fiber jumpers for 15 years. Each cable is ....
Check Stock

D YEDEMC SM&MM Automatic Fiber Optical Fusion Splicer Integrate Visual Fault Locator and Optical Power Meter (Ai-9) & Fiber Cleaver Kit (Green_Box_Ai-9)

  • ... Built-In power meter (Wavelength 850nm/1300nm/1310nm/1490nm/1550nm/1625nm).
  • Built-in Visual Fault Locator:Power:15mw,2hz flashing And Constantly Bright Mode..
  • With 5-inch 800x480 high-resolution screen, is up to 300 times focus magnifications.
  • 5s fast splicing 15s fast heating.Once splicing reaches to 50,000 times free replacement a new machine.
  • Through the phone app,splicing is easy to operate,calibrate and Other settings are performed on the mobile APP.
  • 10 Languages to switch freely :English,french,Russion,Italian,Portuguese,Polish,Spanish,Thai,Arabic,.
  • Friendly Customer Service,if have problem,pls contact us using the amazon message box,we will solve your problem in time and must give you a satisfactory solution .At the same time,you also need a little patience. Unlike some buyers who have no patience,not waiting for the problem to be solved, will make some untrue comments..
Check Stock

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

  • ✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
  • ✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • ✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
  • ✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
  • ✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..
Check Stock

JILONG Fusion Splicer KL-520E Core Alignment Fiber Splicing Machine ARC Welding Equipment

  • 5200mAh Battery capacity. Splicing & Heating 300 times.
  • 320X Fiber image magnification, fiber core clearly visible.
  • 10000 Groups of fusion records & 2000 groups images.
  • Convenient for data download & software update.
Check Stock