Categories

Best Optical Pin tia Receiver Module

OSOYOO Robot Car Starter Kit for R3 | STEM Remote Controlled Educational Motorized Robotics for Building Programming Learning How to Code | IOT Mechanical DIY Coding for Teens Adults

  • ... This Ultimate Gift Bundle Includes Everything You Need To Build and Engineer Your Own Robotic Car: Basic Board, USB Cable, Model X Motor Driver Module, WiFi Shield, Bluetooth Module, Ultrasonic Sensor & Holder, Servo Motor, 5 Line Tracking Modules, 2 Obstacle Sensors, Buzzer Sensor Module, Infrared IR Remote, Receiver, & Transmitter, Battery Box, battery and charger, Voltage Meter, 2 Piece Acrylic Car Chassis, 4 Motors & Metal Motor Holders, 4 Wheels.
  • MORE THAN THE BASICS: ADDITIONAL ACCESSORIES INCLUDED IN DIY ROBOTIC STEM SET — 2 8-Pin Female to Female Jumper Wires (20 cm), 2 20-Pin Male to Female Jumpers (20 cm), 1 Male to 5 Female Jumper Wire, 3-Pin Female to Female Jumper, 6 Pin Male to Female Jumper, Screws & Nuts for Sensor and Module Assembly, Philips Screwdriver, Basic Tutorial CD with Video, Pictures, Sample Project Code, & Step-by-Step Instructions. Designed for Easy Assembly and Great Performance.
  • OSOYOO Robot Car Kit for Arduino is a perfect gift for your Children who are interested in programming, robotics, electronics, or mechanical design as it can improve logical thinking, mechanical, and electrical abilities of your Children....
Check Stock

CreativeKIT GLC-SX-MM,1.25G SFP 1000Base-SX, 850nm MMF, 550m DDM Transceiver for Cisco Meraki Ubiquiti and Other Open Switches

  • Overview--1.25 Gb/s 1000Base-SX Ethernet, 850-nm, Duplex LC connector, up to 550 meters. Temperature Range--0 to 70°C，Output Power: -8.2~-1dBm，Receiver Sensivity: -11.5dBm，Interface: LC.
  • Compatible Type: GLC-SX-MM ,GLC-SX-MMD/GLCSX-MM/SFP-GE-S, Meraki MA-SFP-1GB-SX, Ubiquiti UF-MM-1G, Mikrotik S-85DLC05D.
  • Stable Transmission -- This 1000BASE-SX SFP supports 550m stable link lengths over Dual LC OM3 multi-mode (MMF) fiber. Each SFP transceiver module is individually tested to be used on 1G switches, routers, servers, NICs, media converter and other transmission equipment that support SFP modules..
  • Wide Compatibility -- for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches..
  • You will get: 1 PCS 1.25G multimode optical module + 1 PCS OM3 3-meters multimode dual fiber optical fiber (The fiber is easy to break, please do not bend).
Check Stock

USB to Bluetooth Convert Adapter USB2BT PLUS ADU2B02P Japan Import

  • 【DAC with Bluetooth Receiver】It converts optical, coaxial and Bluetooth-transmitted digital audio input to stereo analog RCA & 3.5mm audio output....
  • 【Latest 5.0 Bluetooth Version】Built-in Bluetooth receiver module, supports mobile phone Bluetooth audio push, Bluetooth 5.0 lossless transmission....
  • 【192kHz & Volume Adjustment】Built-in high-performance DAC chip, supports 192K/24bit sampling rate, help users solve the problem of connecting....
  • 【Ultra Performance】Automatically switch to Bluetooth playback mode after successful Bluetooth connection.
  • 【Application】Suitable for home theater, teaching, training structure, conference rooms, appliance stores and other places..
Check Stock

PROZOR 192k Digital to Analog Audio Converter with Bluetooth 5.0 Receiver Digital Toslink Optical to 3.5mm, Coaxial Toslink to Analog Stereo L/R RCA 3.5mm Audio Adapter

  • PROZOR Digital to Analog Converter: Supports optical, coaxial, bluetooth-transmitted digital audio signals into stereo analog RCA & 3.5mm audio output when connected to the amplifier..
  • Latest 5.0 Bluetooth Receiver: Built-in Bluetooth receiver module, adopts the latest Bluetooth version 5.0 lossless transmission technology, supports mobile device Bluetooth connection..
  • High Performance: Built-in high-performance DAC chip, supports 192K/24bit sampling rate. Adopts Bluetooth dedicated antenna for stable signal transmission, adopts personalized status indicator..
  • Ultra Low Power Consumption: Automatically switch to bluetooth playback mode after successful bluetooth connection.
  • Power ON/OFF Switch, long press 3 seconds to turn off, short press to turn on..
  • Application: Input: one optical and one coaxial , Output: one RCA and one 3.5mm audio, for home theater, teaching, training structure, conference rooms, appliance stores and other places..
Check Stock

OSOYOO Robot Car Starter Kit for Arduino UNO | STEM Remote Controlled App Educational Motorized Robotics for Building Programming Learning How to Code | IOT Mechanical DIY Coding for Kids Teens Adults

  • ...te Gift Bundle Includes Everything You Need To Build and Engineer Your Own Robotic Car: WiFi Shield, Basic Board for Arduino, USB Cable, Model X Motor Driver Module, Bluetooth Module, Ultrasonic Sensor & Holder, Servo Motor, 5 Line Tracking Modules, 2 Obstacle Sensors, Buzzer Sensor Module, Infrared IR Remote, Receiver, & Transmitter, 9V Battery Box, 18650 Battery Box, Voltage Meter, 2 Piece Acrylic Car Chassis, 4 Motors & Metal Motor Holders, 4 Wheels.
  • MORE THAN THE BASICS: ADDITIONAL EDUCATION ACCESSORIES IN DIY ROBOTIC STEM SET: 2 8-Pin Female to Female Jumper Wires (20 cm), 2 20-Pin Male to Female Jumpers (20 cm), 1 Male to 5 Female Jumper Wire, 3-Pin Female to Female Jumper, 6 Pin Male to Female Jumper, Screws & Nuts for Sensor and Module Assembly, Philips Screwdriver, Basic Tutorial CD with Video, Pictures, Sample Project Code, & Step-by-Step Instructions. Designed for Easy Assembly and Great Performance — Practice and Become a Master!.
Check Stock

The Warhol Incident (Alexis Parker Book 2)

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.
Check Stock

Wireless Bluetooth AUX Adapter Car Audio Stereo Module for Pioneer Wireless IP-Bus Input

  • 【Compatibility】: AUX Adapter is designed for Pioneer Wireless IP-BUS input.
  • 【Easy to use】: For pioneer bluetooth ip bus auxiliary cable receiver is easy to use, just connect the 12-pin connector on the back of the radio..
  • 【About the wiring】: Just plug it into the back of the radio, then connect the red wire to 12V+ and the black wire to 12V-..
  • 【Mobile phone use】: Audio Bluetooth Adapter responds to the mat of your mobile phone or Bluetooth module. Select Aux from your radio, and then you....
  • 【Bluetooth adapter】: This Bluetooth Audio Stereo Module allows you to listen to music via mobile phone/tablet/mp3 (note that your device needs to....
Check Stock

IDOlpro IP-3900 2600W Mixing Amplifier with Built-in Equalizer, Bluetooth, HDMI, Optical Input, Recording

  • Power Output : 1300W +1300W @ 8Ω (Peak).
  • 3 XLR Front 2- 1/4″ Microphone Inputs, 2 XLR Rear 2-1/4″ Microphone Inputs.
  • Audio Bluetooth Receiver Built-in For Streaming From Smart Devices.
  • Built-in MP3 Player Module with USB Jack for Recording to USB Flash Drive ( not included).
Check Stock

PROZOR 192KHz DAC Digital to Analog Audio Converter with Bluetooth 5.0 Audio Transmitter and Receiver, Optical to RCA Converter with aptX HD aptx Low Latency Wireless Audio Adapter

  • 192kHz DAC, supports signal conversion from digital optical coaxial audio to RCA 3.5mm analog audio. Supports 192K / 24bit sampling rate.(Bluetooth decoding format: aptX-LL, aptX-HD, aptX, sbc).
  • Built-in Bluetooth version 5.0 transmitter and receiver, adoting high-tech Bluetooth module, the transmitter mode supports the simultaneous connection of 2 pairs of Bluetooth headsets or Bluetooth speakers.
  • The receiver mode supports the connection of mobile devices such as mobile phones and ipads..
  • Support aptX HD, aptX HD audio can ensure that compatible Bluetooth devices provide high definition (HD) audio. It will retain sound data during the entire audio transmission process, thereby bringing a "better than CD" listening experience..
  • NO LIP-SYNC DELAY, supports aptx low-latency codec, almost eliminates audio-visual delay, making our product an ideal choice for watching TV/movies. For best results, please use it with headphones/speakers that support aptx Low Latency..
  • Easy to use, the product has a connection status/audio decoder indicator, making it easy to set up and use. Compatible with all devices with optical coaxial output interfaces, such as TV, DVD , game consoles, stereos with RCA, 3.5mm input interfaces, earphone equipment..
Check Stock

Acxico 2Sets Laser Sensor Module For Arduino AVR(KY-008 Laser Transmitter +Laser Receiver Sensor Module Non-modulator Tube)

  • Model: 1*Laser Receiver Sensor Module+ 1* KY-008 Laser Transmitter Module.
  • Laser Receiver Sensor Module uses the non modulated laser receiver, please use in the room where without the light, the sunlight or other lamps and lanterns will interfere, suggested in the dark environment use..
Check Stock

Home Karaoke Combo IDOLmain 6000W IP-5900 Mixing Amplifier Plus UHF-626 Dual Wireless Microphones

  • Please check ” Ship from and sold by KTSKaraoke” when you check out for authentic products and full warranty. IP-5900 provides 6000W (Peak) of crisp clean power with Auto Volume Cancellation, Built-in MP3 Player Module, Recording Function to USB With Level Adjustment, Audio Bluetooth receiver built-in for streaming from smart devices, Guitar Input With Volume Control, Digital Optical Input.
  • Mixing amplifier has 3 XLR Front 2- 1/4″ Microphone Inputs. 2 XLR Back 2-1/4″ Microphone Inputs.2 HDMI Inputs, 1 HDMI Output . 3 Audio/Video Inputs: DVD/AUX/BGM/VCR.1 RCA Audio/Video Output..
  • UHF-626 is a professional high-end wireless microphone system with solid structure built, clear LCD display, reliable performance, anti feedback, vocal support, auto-sound cut off when dropping, ECO mode for battery life saving, and auto digital pilot to avoid stringing frequency. Approximate working distance is 300ft..
  • Package includes: Microphone UHF-626,Mixing Amplifier IP-5900, FREE Optical Cable, FREE HDMI Cable / Note: We do not ship to Hawaii, Alaska, APO, FPO.
Check Stock

DISH MT2 OTA MODULE [Electronics]

  • An MT2 Over-the-Air (OTA) Module to connect your over-the-air (OTA) antenna directly to your ViP222k or ViP722k DVR satellite receiver.
  • View local, digital, over-the-air channels directly through your satellite receiver by integrating the OTA channels into your Program Guide..
  • An OTA antenna must be installed to use the Module..
  • A satellite signal and a DISH Network programming subscription is required to operate the OTA module..
Check Stock

DGZZI 50pcs Blue 5mm Pitch PCB Mount Screw Terminal Block Connector for Arduino (20pcs 2 Pin + 15pcs 3 Pin + 15pcs 4 Pin)

  • Application: crystal oscillator, IC socket, DIY PCB universal board, Dupont wire, digital tube, buzzer, Arduino UNO board, PIC programming unit, AVR ATMEL programming unit, connector suite, USB TO TLL module, power module, LCD module, RS232 TO TLL module..
  • Package includes: 20 x 2 Pin Screw Terminal Block + 15 x 3 Pin Screw Terminal Block + 15 x 4 Pin Screw Terminal Block.
Check Stock