KAKURI Azebiki Japanese Saw for Woodworking 3-1/2" Made in JAPAN, Japanese Curved Hand Pull Saw for Hole, Mid Panel, Groove Cutting, Ryoba Double Edge Blade for Rip & Crosscut

  • ...DE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
  • RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
  • RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
  • PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.
Check Stock

Japanese Pull Saw Professional Ryoba Saw 10 Inch Double Edge Flush Cut Hand Saw with Portable Bag for Woodworking

  • ...ter in weight, requires less power, and the resulting edge is cleaner.
  • [10 Inch Ryoba Double Edge] - The double sided general purpose carpenter's saw has impulse hardened teeth on both edges of the blade.
  • The 18 TPI triple-cut coarse teeth for ripping and the other side 6TPI to 10TPI fine teeth for highly precision crosscutting. The length of the blade makes for long pull strokes and therefore fast cutting — cross cut a 2 x 4 in 30 seconds! It enables you to make a wider variety of woodworking products.
  • [Super-thin Replaceable Blade] - The 0.023 inch thick, 10 inch long blade consisted of top quality japanese steel gives a fine kerf, handling size for highly precision work and provides accurate cuts with much less effort. Plastic head thumb screw makes it release or install the saw blade easily.
  • [Ergonomics TPR handle] - The ergonomic handles are wrapped with Thermal Plastic Rubber for a secure grip. After working for a long time, it can still make your hands feel comfortable.
  • [The Organized Saw Bag] - A portable bag for protecting, storaging, carrying and organizing your pull saw. Maintain your pull saw blades With the bonus teeth brushes..
Check Stock

Goplus Table Saw 10-Inch 15-Amp Portable Table Saw 36T Blade Cutting Speed Up to 5000RPM 45º Double-Bevel Cut Aluminum Table Benchtop Table Saw with Metal Stand Sliding Miter Gauge

  • ...e extra friction for smoother sliding. Table saw features36T carbide-tipped blade, which is designed with transparent guard and riving knife to protect you from accidental hurt and flying chips..
  • 【Double Bevel Cutting & Adjustable Height】Featuring the double bevel cutting from 0-45°, this table saw provides cross cut at 90°--3" and bevel cut at 45°--2-1/2". And portable table saw has a large hand wheel to control the blade lifting, convenient for different needs, such as slotting, ripping or cutting..
  • 【Miter Gauge & Rip Fence】Sliding miter gauge can be adjusted from -45° to 45° for cross cutting. And self-aligning rip fence with parallel guide on both sides assists the more precise and stable cutting without any wobbling..
  • 【Ergonomic Benchtop Table Saw】On-board storage system is convenient for your wrench and push stick when not in use. The on/off safety switch is available to control table saw stand and provide overload protection. And the 10 inch table saw can be used without the stand which is convenient for outdoor wood cutting..
Check Stock

FALKENWALD 7 1/4 Circular Saw Blade Multi-Material - Circular Saw Blades 7 1/4 inch Wood, Aluminum, Metal - Saw Blades 7 1 4 Compatible with DEWALT etc

  • REAL ALLROUNDER - With our multi-material circular saw blades 7 1 4 inch you don't have to think anymore. It is a wood saw blade and metal cutting blade in one. Perfect for sawing in wood, aluminum, steel sheets, pipes and plastic..
  • 100% PRECISION - The key to a perfect cut lies in tooth position & material of the 7 inch circular saw blade: With Falkenwald you get fine cutting results for a cross-section or longitudinal-cut as well as for the production of a groove..
  • 100% COMPATIBLE - Turn your saw into a professional tool! No matter if DeWalt 20V MAX 7-1/4-Inch, SKIL 5280-01, DeWalt DWE575, Makita 5007F 7-1/4. The blade fits on the popular saws from DeWalt, Skil, Makita, Black+Decker etc...
  • CUT FINE & TEAR-FREE - Get excellent sawing results on variable materials with the tuned tooth pitch of the carbide 7 inch saw blade. Our metal saw blade ensures tear-free cutting edges under maximum load. Metal cutting saw blade..
  • MONEY BACK - To make your decision easier, you get our promise: If you are not satisfied with our large circular saw blades for any reason, you will get your money back - Up to 60 days after purchase! FALKENWALD miter saw metal cutting blade..
Check Stock

Nightcore Table Saw, 10-Inch 15-Amp Portable Multifunctional Saw w/36T Blade, 5000RPM & 45º Double-Bevel Cut Aluminum Table Saw, Bench Saw with Metal Stand & Sliding Miter Gauge for Woodworking

  • ...-45°, this portable table saw offers a 90° -3 "and 45° -2-1/2" bevel cut. Moreover, this portable table saw is equipped with large hand wheel to control blade lifting, convenient for slotting, wire drawing or cut.
  • Miter Gauge and Rip Fence:The flexible sliding miter gauge can be easily adjusted from -45° to 45° cross cutting. In addition, self aligned tear fence, parallel guide on both sides, cutting more accurate, more stable, without any shaking..
Check Stock

DEWALT 20V MAX* 7-1/4-Inch Miter Saw, Cordless (DCS361M1)

  • DEWALT 20V miter saw utilizes 20V Max* battery pack (DCB204) which provides on average 183 cuts of 2x4 Pine or 275 cuts of 3-1/4 pine baseboard.
  • Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility for the mitre saw.
  • DEWALT miter saw has the capacity to cup 3 5/8-inch nested crown and 3 1/2 base vertically.
  • Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy,.
  • Oversized bevel scale makes bevel angle adjustments accurate and easy.
  • Compact, lightweight design (31.6 bs.) allows for easy transport and storage.
  • Cam lock miter handle delivers quick and accurate miter angles.
  • Precise miter system and machined base fence support optimize durability and cutting accuracy.
Check Stock

Saw

  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops.
  • The mitre saw features the precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch.
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree.
Check Stock

Kreg KMA2700 Accu-Cut 48-Inch Guide Track System With KMA2685 Rip-Cut 24-Inch Precision Edge Guide

  • CUTS: Make rip cuts and crosscuts up to 24" wide / Cut multiple pieces to the same size with just one setup / Prevent splintering with anti-chip....
  • GUIDE: Use the oversize edge guide for precise control throughout the cut / Eliminate need for marking, measuring, and layout lines / Hold track in....
  • EASY SAWING: Take your saw to the material instead of having to take your material to the saw.
  • VERSATILE: Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels / Simply align the Guide Track with your marks to make....
  • BUNDLE INCLUDES: Kreg KMA2700 Accu-Cut 48-Inch Circular Saw Guide Track System.
Check Stock

Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet

  • If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process..
  • Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!.
  • UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavi....
Check Stock

KERYE Japanese Pull Saw 9.5 Inch, Hand Dovetail Saw with Double Edges of 10/17 TPI and Replaceable Blade, Ryoba Flush Cut Saw, Sharp and Light Woodworking Tools for Men and Women-KY01

  • 【 Larger Working Area 】 Compared with 6 Inch saw, 9.5 inch pull saw enables larger working area for more working possibilities. Meanwhile, 9.5 inch saw saves at least 50% force than 6 inch in principles of Physics.
  • 【 Sturdy Durable Material 】 We have blade made from SK5 high carbon steel, which is known for its hardness and wear-resistant.
  • and we have handle made from beech and rattan, which is light and ergonomic for time and force saving.
  • 【 3-Sided Grinding Teeth 】 As woodworking professional knows, saw with 3-sided grinding teeth is sharper and wear-resistant and thus has a longer life span. Besides, the denser side teeth are quenched to be harder.
  • 【 2-in-1 Pull Saw 】 This bi-lateral saw has two sides with teeth, one with teeth of 10 TPI( rougher side) and the other, 17 TPI(denser side). The rougher side is more suitable for rip cut ( quick and less detailed cut ).
  • the denser side is more suitable for cross cut ( comparatively slower and more detailed cut).
  • 【 Reliable After Sale 】 We have 24 months after-sale support and 100% problem-solving service..
Check Stock

WEIMELTOY Small Woodworking Hand Saw, 6 inch Flexible Blade Double edge TPI 17/14 Pull Saw for Craft, Hobby, DIY, Non Slip Wood Handle Garden Trim Saw, Sharp and Light Woodworking Tools

  • : WEIMELTOY hand saw made with SK5 stainless steel, is more harder and durable. Our pull saw with wood handle comfort-grip handle, non-slip. The blade fixed on handle with 2 pressed clinch bolt, more durable and sturdy..
  • :Our pull saw apply Japanese process craft, durable and hardness and wear-resistant, long life span..
  • : Hand Saw with sharp double edged blade, flexible and durable. One side is 17 TPI one side for hard woodworking is 14TPI for soft woodworking. The blade with hard pulse teeth durable and flexible, can both rip cut and cross cut with smooth cut edge..
  • : The pull saw is light weight and sharp blade, accurate cuts with much less effort..
  • : Fit for both master and beginner, for DIY wood working and tree trimming etc, enrich your woodworking life ..
Check Stock

KERYE Japanese Pull Saw 9.5 Inch, Hand Saw with Double Edges of 10\\/17 TPI and Replaceable Blade, Ryoba Flush Cut Saw, Sharp and Light Woodworking Tools Gifts for Men and Women-KY01

  • 【 Larger Working Area 】 Compared with 6 Inch saw, 9.5 inch pull saw enables larger working area for more working possibilities. Meanwhile, 9.5 inch saw saves at least 50% force than 6 inch in principles of Physics.
  • 【 Sturdy Durable Material 】 We have blade made from SK5 high carbon steel, which is known for its hardness and wear-resistant.
  • and we have handle made from beech and rattan, which is light and ergonomic for time and force saving.
  • 【 3-Sided Grinding Teeth 】 As woodworking professional knows, saw with 3-sided grinding teeth is sharper and wear-resistant and thus has a longer life span. Besides, the denser side teeth are quenched to be harder.
  • 【 2-in-1 Pull Saw 】 This bi-lateral saw has two sides with teeth, one with teeth of 10 TPI( rougher side) and the other, 17 TPI(denser side). The rougher side is more suitable for rip cut ( quick and less detailed cut ).
  • the denser side is more suitable for cross cut ( comparatively slower and more detailed cut).
  • 【 Reliable After Sale 】 We have 24 months after-sale support and 100% problem-solving service..
Check Stock

DEWALT FLEXVOLT 120V MAX* Miter Saw, 12-Inch, Double Bevel, Compound, Sliding, Tool/Adapter Only (DHS790AB)

  • Flexible power -The 12-inch miter saw blade has the corded or cordless power.
  • Runtime - The mitre saw provides up to 289 cross cuts in 3-1/4 inch baseboard.
  • CUTLINE blade positioning system of DEWALT miter saw delivers accurate line of sight to the cut.
Check Stock