HIHWEM Mold Mildew Remover Cleaning Gel Household Cleaner for Sealant Tiles Grout Washing Machine Cleaner Bathroom Stain Remover Home Kitchen Sinks Cleaning - 10Fl.Oz
- ☛Ready-to-Use Powerful Concentrated Gel Formula –the mold remover gel can stick to any surface and won’t flow down, can covered for a long time,active ingredients are not volatile.
- Low odor — The irritating odor of gel is less than the ordinary spray..
- ☛Fast Acting & Effective — Add Lysozyme,penetrates into the mold roots for rapid decomposition for Long-lasting Protection..
- ☛Wide Range Of Use — Can be used in Refrigerator Silicone Seal,Washing Machine Seal,Kitchen Sink,Wall Surface,Tile Grout Caulk,Closestool,Washbasin,bathtub, Showers,Window frame,etc..
- ☛Simple to use — Just apply the gel evenly in need Of mildew removal , after holding 3-10 hours,no scrubbing,and rinse with water or wipe with a towel..
- ☛It Works! — free your HOME from ugly MOLD stains, eliminate mold and mildew once and for all!.
Check StockLYECUN Watch Press Set Back Case Closer, Watch Crystal Press, Watch Press Set, Watch Battery Replacement Tool
- 【Low Risk】: Unlike ordinary watch press tool, it applies pressure by holding the top handle and turning it, allowing you to easily and flexibly control the pressure during operation, greatly reducing the risk of accidentally crushing the watch glass.
- 【High Quality】: The watch press tool is made of all metal, the mold is ABS plastic, the net weight of a single watch press tool is 350 grams, it is sturdy and durable.
- 【Wide Range of Adaptations】: This watch press set comes with 12 dies, including 10 double-sided dies and 2 special dies. Suitable for most sizes of the press-fit watch repair and battery replacement use.
- Equipped with a cleaning cloth, put it between the watch glass surface and the mold before pressing to avoid scratching the glass.
- 【Simple Operation】: 1. Select the appropriate size mold (please check the details page below for the specific selection method). 2. Place the mold and the watch in order, adjust the upper and lower balance, and ensure that there is no offset. 3. Slowly turn the rotary handle of the watch press tool and press the back cover of ....
Check StockNicole Flower Pot Silicone Mold Geometric Cement Planter Mould Handmade Craft Decorating
- Premium Platinum Silicone - The mould is made of non-toxic and odorless food-grade material, soft but strong and durable, more stable, and easier to demould than ordinary silicone. At the same time, it also has a longer service life..
- SIZE - Mold: 11.0cm x 11.2cm. Flower Pot: 11.6cm x 5.4cm..
- Simple to Use - Just pour your recipe into the mold.
- Once ready to be unmolded, simply loosen the ends around the mold and turn upside down.
- Your masterpiece will pop out without and cracking or breaking..
- Drainage Hole Design - Comes with a drain hole at the bottom. Drainage hole prevents the flower pot from overwatering, promoting plant health..
- 100% SATISFACTION GUARANTEED -- For any reason you aren't satisfied with this handmade soap molds, please contact us and we will be happy to provide you with your choice of a replacement or refund. You have nothing to worry about and you'll be glad you got these..
Check StockPerfect Craft Hand Mold, Cast & Paint Kit with Perfect Cast Casting Material
- This fun kit includes everything needed to create a memorable keepsake of your very own.
- First, follow the instructions to make a mold of a hand or foot using the Alginate Molding Material.
- Next mix the Perfect Cast Casting Material and pour it into the mold that you have created.
- After it has set, unmold to find your finished cast that is 5 times stronger than ordinary plaster casts for durability and longevity!.
- Complete kit includes one 6 oz bag of PerfectMold molding mix, one 14 oz bag of PerfectCast casting mix, and complete instructions.
Check StockFOLLOWIN Mold and Mildew Bathroom Cleaner Gel 18oz, Household Stain Cleaner for Showers Tiles Grout Sealant Sinks
- ❤Powerful Concentrated Gel Formula: High capacity-18 ounce bottle concentrated mold cleaner gel can use lasts up to 6 to 12 months or more.
- ❤ the mildew cleaner gel can stick to any surface and won’t flow down and covered for a long time, active ingredients are not volatile.
- ❤Safe For Virtually Any Surface: Bleach-free, biodegradable, non-acidic,eco-friendly, safe and effective, Low odor -the irritating odor of mold stain cleaner gel is less than the ordinary spray.
- ❤Simple and Quick: Just apply the cleaner gel evenly in need of place, wait 3-10 hours, gentle cleaner, without scrubbing, sanding, wire brushing.
- ❤Wide Range of Use: Can be used in kitchen sink, bathroom sink, silicone sealant, stainless steel sinks, kitchen and bath tiles, washbasin, toilet bowls, bathtub, wall surface, veranda, ceramic tile, window frame, refrigerator, washing machine silicone sealant, caulk and so on.
- ❤Clean As New :Use the followin mold and mildew cleaner free your home from ugly mold & mildew stains, removes foul odors, give you a clean and healthy home. ❤Note: Do not use it outside the intended use,If you have any problems in the future, please feel free to email us, we will do our best to solve your problem.
Check StockFOLLOWIN Mold and Mildew Stains Bathroom Cleaner Gel 16oz, Household Stain Cleaner for Showers Tiles Grout Sealant Sinks
- ❤Powerful Concentrated Gel Formula: High capacity-16 ounce bottle concentrated mold cleaner gel can use lasts up to 6 to 12 months or more.
- ❤ the mildew cleaner gel can stick to any surface and won’t flow down and covered for a long time, active ingredients are not volatile.
- ❤Safe For Virtually Any Surface: Bleach-free, biodegradable, non-acidic,eco-friendly, safe and effective, Low odor -the irritating odor of mold stain cleaner gel is less than the ordinary spray.
- ❤Simple and Quick: Just apply the cleaner gel evenly in need of place, wait 3-10 hours, gentle cleaner, without scrubbing, sanding, wire brushing.
- ❤Wide Range of Use: Can be used in kitchen sink, bathroom sink, silicone sealant, stainless steel sinks, kitchen and bath tiles, washbasin, toilet bowls, bathtub, wall surface, veranda, ceramic tile, window frame, refrigerator, washing machine silicone sealant, caulk and so on.
- ❤Clean As New :Use the followin mold and mildew cleaner free your home from ugly mold & mildew stains, removes foul odors, give you a clean and healthy home. ❤Note: Do not use it outside the intended use,If you have any problems in the future, please feel free to email us, we will do our best to solve your problem.
Check StockSilicone Planter Mold for Concrete Car Shaped Flower Pot Mould Handmade Craft Cement Home Garden Decoration Tool
- Premium Platinum Silicone - The mould is made of non-toxic and odorless food-grade material, soft but strong and durable, more stable, and easier to demould than ordinary silicone. At the same time, it also has a longer service life..
- SIZE - Mold: 10.7 x 14.8 x 8.0 cm(4.21 x 5.82 x 3.15 in). Flower Pot: 9.4 x 14.0 x 6.5 cm(3.7 x 5.51 x 2.55 in)..
- SIMPLE TO USE - Just pour your recipe into the mold.
- Once ready to be unmolded, simply loosen the ends around the mold and turn upside down.
- Your masterpiece will pop out without and cracking or breaking..
- DRAIN HOLE - Comes with a drain hole at the bottom. Drainage hole prevents the flower pot from overwatering, promoting plant health..
- ABOUT US - Provides quality products and efficient after-sales service.If you're not satisfied with our products,please contact us, we will provide you with a solution as soon as possible..
Check StockSilver Toned Saint Benedict Medal Spinner Keychain 3 7/8 Inch
- Perfect Details >>> Using high precise aluminum alloy mold instead of cheap ordinary silicon mold, So Men's Catholic St Benedict Exorcism Signet Rings....
- Big, Solid, Heavy, and Sturdy Ring for Men >>> The Inner of ring is Smooth solid.
- Ring Size >>> The rings are made according to American ring size standard. It is the best to check your ring size at a jewelry store. If you would....
- Worry-Free Quality Warranty and Friendly Customer Service - We offer premium quality products and professional customer service response. It is a....
- Nice Christmas Gift for Men>>>A well crafted stainless steel Saint Benedict ring is a perfect gift for Men on birthday or any religious special day. A....
Check StockBOOWAN NICOLE Concrete Planter Molds Mouth Shaped Cement Silicone Mould DIY Flower Pot Making Tools
- PREMIUM PLATINUM SILICONE: The mould is made of non-toxic and odorless food-grade material, soft but strong and durable, more stable, and easier to demould than ordinary silicone. At the same time, it also has a longer service life..
- SIMPLE TO USE: Just pour your recipe into the mold.
- Once ready to be unmolded, simply loosen the ends around the mold and turn upside down.
- Your masterpiece will pop out without and cracking or breaking..
- WIDELY USED: The body mold is very suitable for DIY projects. You can use it to make decorations to decorate your living room, study room, desk, etc. It is also a good gift for friends or those who love handicrafts. You can share handmade creative works and creative processes with family and friends, and experience the fun of handmade together..
- RETURN OF GOODS WITHOUT REASONS: We take pride in delivering top quality products and guarantee a FULL REFUND if you are not satisfied with our products.TOTALLY RISK FREE,buy with confidence now!.
Check StockYinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs
- 【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
- Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
- 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
- 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
- They have the characteristics of small size and high precision.
- 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
- 【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.
Check StockYinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs
- 【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
- Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
- 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
- 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
- They have the characteristics of small size and high precision.
- 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
- 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check StockYinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs
- 【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
- Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
- 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
- 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
- They have the characteristics of small size and high precision.
- 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
- 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check StockPerfect Craft Customizable Stepping Stone Cast & Paint Kit with Perfect Cast Casting Material
- The Perfect Craft Stepping Stone Casting Kit is the kit for creating a completely personalized stepping stone with the look and feel of an engraved....
- First, choose the design you want to showcase on your stepping stone using the included design elements and place them into the stepping stone mold.
- Then, follow the instructions to mix the Perfect Cast Casting Material mix and pour it into the mold.
- Perfect Cast quickly hardens to perfection in....
- After it has set, unmold to find a finished stone that is 5 times stronger than ordinary plaster casts for durability and longevity!.
- Create a stone to commemorate a move to a new home, a child's birth, weddings, anniversaries, a favorite pet... the list goes on!.
Check Stock