Best Orifice Flanges

Maymom Flange Inserts 17 mm for Freemie 25 mm Collection Cup 2pc/each semi transparent

  • After market silicone insert compatible with Freemie 25 mm cup. Reduce the nipple tunnel down to 17 mm..
  • Made from Silicone and PP - BPA free, and DEHP free.
  • Also compatible with Medela 24mm PersonalFit shield, Spectra 24mm flanges, Ameda Purely Yours 25mm flanges, Ameda Mya Joy 25mm flanges, Willow 24mm....
  • Incompatible with Medela 24mm PersonalFit Flex, Motif Luna 24 flanges, Ameda Mya/Ameda Mya Pro 24mm flanges, Elvie/ Elvie Stride 24mm flanges, Momcozy....
Check Stock

Sunrise Natural Gas Burner Valve (Valve 3 3/8\)

Check Stock

EXP VALVES/ORIF TUBE - FIXED ORIFICE TUBE

  • See Description For Full List of Vehicles This Item Fits.
Check Stock

TSI Supercool 92311 Deluxe Orifice Tube Service Kit

  • Five piece universal kit in a custom molded case.
  • Includes all the tools you need to remove and install any style orifice tube.
  • Consists of an auger point shaft, nut and arbor, GM puller, extension and orifice tube puller.
  • Replacing orifice tubes should go hand-in-hand with compressor replacement.
  • Supercool offers one of the most complete A/C maintenance programs in the marketplace.
Check Stock

AC Orifice Tube Removal Tool Fits for GM Vehicles Car Air Conditioning Orifice Tube Remover Installer Tools

  • Product Function: AC orifice tube removal tool fits for most GM vehicles. It is used to disassemble the damaged hole pipe auger and turn it into hole pipes for grasping, so that the nut exerts a uniform and stable pressure to avoid damage the small plastic ears on the tube, make replacement and maintenance easier.
  • Material: GUZIKO orifice tube removal tool is made of high-quality metal, which is sturdy and durable and can be used for a long time.
  • Easy to Use: The tool can be slid into and locked on the tabs on the orifice with a slight twist, and then the old orifice can be pulled and rotated until it can come out. It saves time trying to use needle-nose pliers to enter a small area to pull out the old orifice tube. Don't worry about breaking the end with pliers.
  • Notes: Sometimes you have to add a little bit of heat on the pipe to make the other accessories to loosen up a little bit. It's better to apply some heat the heat down and then start pulling.
  • After-sale Service: We will offer a 12 months service, if you have any problems in use, Please contact us at any time, we will respond within 12 hours.
Check Stock

Ashford Traditional Single Drive/Unfinished Wheel

  • The world’s most popular spinning wheel for 70 years. Many optional accessories make this an extremely versatile wheel..
  • Includes: 4 Standard Single Drive Bobbins, Vertical Lazy Kate, Threading Hook, and Learn to Spin Booklet..
  • Single drive ratios 7, 9, 12, 17:1. Orifice: 3/8 inch (1 cm). Orifice: 3/8 inch (1 cm). Orifice Height: 27 1/4 inches (69 cm). Wheel diameter 22 inches (56cm). Weight: 17.5 lb (8 kg)..
  • Made from New Zealand Silver Beech (unfinished). Assemble required..
Check Stock

Tool Daily Pressure Washer Sand Blasting Kit, Wet Sandblaster Attachment, 2500 PSI, 1/4 Inch Quick Connect

  • Wet sand blaster for pressure washer is suction-fed injection of sand into water system..
  • Working pressure of pressure washer sand blaster attachment is up to 2500 PSI. Orifice 2.5. Max flow rate: 2 GPM. Temperature is up to 140°F/60℃. Please check image 6 to choose the size of orifice. If you need orifice 3.5 or orifice 3.0, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment, 5000 PSI”..
  • The pressure washer sand blasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 10’’ sand wand (sand input) and permanent nozzle (output)..
  • Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
  • Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
Check Stock

GasOne Head Banjo High Pressure Propane Burner 10 in Heavy Duty

  • Includes - Burner Head, Orifice, Air Controller & 0-20 PSI adjustable High Pressure Regulator and Hose.
  • BRASS FITTING ORIFICE BLOCK - Includes Brass Fitting Orifice block & Air shutter and Spring.
  • HEAT RESISTANT - Cast Iron will not melt easily compared to aluminum construction, Has high heat tolerance.
  • HIGH HEAT OUTPUT - With 0-20 PSI Regulator it produces up to 200, 000 BTU.
Check Stock

XZT 3000psi(s16)-m22(Female) Pressure Washer Sewer Drain Hose,Sewer Jetter Hose Kit (50FT)

  • Sewer Nozzle Outside Diameter Max.: 0.76″( 19.2mm).
  • orifice: 1 Front(orifice is 1mm) 6 Back(orifice is 0.7mm).
  • Connector: compatible most pressure brand.
Check Stock

PWACCS Sewer Jetter Nozzle for Pressure Washer, Stainless Steel Drain Cleaning Tips for Power Washer, 3 Pieces, Button Nose Jet Nozzle, Rotating Flat Jetting Nozzle and Drain Jet Hose Nozzle, 5000 psi

  • Wild Application: The sewer jetter head kit has been widely used not only in industrials but also in daily lives. It is ideal to be used in cleaning kitchen sink, toilet, industrial pipe, indoor and outdoor plumbing..
  • Premium Material: The pressure washer sewer drain jet nozzle kit is made of durable stainless steel throughout, which is naturally immune to wear, corrosion, rust and oil. A best choice to accompany your whole life..
  • Button Nose Jet Nozzle: Orifice size is 4.0. This kind of jet nozzle is used to clean blockage and debris through one front spray orifice and 3 rear orifices..
  • Drain Jet Hose Nozzle: Orifice size is 6.5. Compared to button nose jet nozzle, this tip has more orifices in quantity (1 in front and 6 in rear), which means it need more power to maintain the same pressure and speed. But it can obviously provide more efficient cleaning..
  • Rotating Flat Jetting Nozzle: Orifice size is 4.5. This jetter nozzle only have 3 backward rotating spray. The location of each orifice make it spin when water runs. It is more destructive to blockages than any other nozzles.
Check Stock

FireDisc - Fire Power Orifice - Backyard Plow Disc Cooker | Portable Propane Outdoor Camping Grill

  • Looking for more power? Get the FirePower Orifice.
  • Adds the extra firepower you need for high-powered, boil-in-minutes cooking. Ideal for large boils or frying of crawfish and shrimp.
  • Regular power orifice should suffice for most recipes.
  • Heats food faster for larger groups and volumes.
  • The FireDisc FirePower Orifice is only compatible with FireDisc Cookers..
  • Can heat the FireDisc to boil and fry in just minutes.
Check Stock

Robinair 10986 Orifice Tube Service Kit for Ford and General Motors vehicles

  • Automotive A/C orifice tube remover tool kit allows removal of orifice tubes before flushing.
  • Speeds A/C service by removing the build-up of particulates on the orifice screen and restrictions that slow the flushing process.
  • The basic tool works on General Motors and Ford vehicles and comes with additional adapters for specific applications.
  • Ford: extender body for 1985 and newer models.
  • General Motors: 1989-91 GM 'J', 'L', and 'N' car adapter, and 1991 and newer 'C' and 'K' series truck adapter (for trucks with No. 3096068 orifices).
Check Stock

HomiShare Floor Flange 2" Pipe Flange 4Pcs Industrial Malleable Iron Pipe Fittings with 4 Threaded Holes, Industrial Vintage Style Floor Flange for DIY Industrial/Home Decoration(4 Pack, 2")

  • High Quality Floor Flange: The floor flange uses premium cast iron as raw material. Each floor flange in our factory need to be tested carefully and protected well. So it is firm enough to use for a long time. All flanges are made from the same mould to ensure precision..
  • Durable and Anti-rust: Compared to other flanges on the market, our flanges have an anti-rust coating on the surface. This coating can effectively prevent the flanges from rusting and corroding, which have a longer life-circle than others..
  • Good Design:Our pipe flange shows vintage lettering on the front surface. Different with other three holes flanges on the market, it has four threaded holes. So the flange can be fixed more stable. In addition, the bottom of our flange is flat and smooth to fit the wall..
  • Easy to Install: The four mounting holes and flat surface help you easily install the flange. The package includes four flanges. You can use them to fasten various pipes, fittings or other industrial equipment. It is very convenient to assemble and disassemble when you need..
  • DIY and Multiple Functions: You can use our flanges with other industrial fittings for a variety of practical applications such as industrial handrail, door handle, rack, shelf, craft ornaments, etc. Just unl....
Check Stock