Goupchn Universal P6100 Oscilloscope Clip Probes 100MHz with Accessories Kit 1X 10X 2 Pack
- Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
- Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
- The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
- Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
- Package includes: 2 x probes, 8 x marker rings, 2 x ground wires, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..
Check StockGoupchn High Voltage Oscilloscope Probe P4100 with Accessory Kit 100MHz 2000V 100:1
- Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
- High voltage probe can withstand 2000V. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
- The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
- High voltage oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
- Package includes: 1 x probe, 8 x marker rings, 1 x ground spring, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..
Check StockGoupchn Oscilloscope Probes Kit with Accessories 200Mhz Test Leads Set BNC to Mini Grabber Cable 4mm Banana Plug to Test Hook Clip Leads
- Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
- Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
- The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
- Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
- Package includes: 2 x 200mhz oscilloscope probes with with Accessories kit, 1 x bnc to minigrabber test lead, 2 x 4mm banana plug to test hook leads, 1 x white transparent storage box..
Check Stock200Mhz Oscilloscope Probe Clip Scope Test BNC End Probe P2200 10X/1X Black with Adjust Tool Kits
- BNC END CABLE: This oscilloscope probe is good oscilloscope accessories, has a cable with standard BNC end, suitable for BNC interface oscilloscope..
- ADJUSTMENT TOOL: There is a adjustment tool that can adjust compensation capacitance to match oscilloscope..
- 1x /10x : This probe is 200MHz oscilloscope probes with a switch for either 1x or 10x attenuation, can meet your different needs..
- DISTINGUISHED BY COLOR : There are marking circles in different colors help to identify different channels, you can tell the channel quickly and easily..
- STABLE: This probe has stable performance, providing several accessories ,suit for professional testing..
Check StockBNC Head to Clip BNC Oscilloscope Probe, Oscilloscope Probe, 1MΩ/10MΩ for Industrial Instrument
- The oscilloscope probe has a BNC head that is suitable for most BNC oscilloscopes..
- The installation is safe and easy to use, so you don't have to worry about the disconnection of the clip..
- The attenuation rate of this oscilloscope probe is 1X/10X, easy to install and convenient to use..
- The compensation capacitance can be adjusted, and the high quality ground clip is very strong and not easy to disconnect..
- Stable performance and high reliability, it is a practical accessory for oscilloscope..
Check StockNooelec Oscilloscope DIY Kit (replacement for DSO138) Bundle. Includes 100MHz Scope Probe, Clip Probe & ESD-Safe Silicone Mat
- Build your own color oscilloscope! Basic through-hole soldering skills are required (surface mount parts are pre-soldered to PCB).
- Purchase includes full oscilloscope kit with parts, 100MHz oscilloscope probe, additional alligator clip probe, and ESD-safe mat for protecting your desk while soldering.
- Printed instructions, troubleshooting guide and schematic are also included.
- Contains a 2.4″ color TFT LCD (320×240) display.
- We speak your language! Need help? Contact Nooelec for assistance!.
Check StockBack Probe Kit - HT307A Automotive Oscilloscope Acupuncture Probe Pins Set Diagnosis Test Repair Tools
- The probe has a banana plug for use in combination with the oscilloscope.They can also work as pin-tip probes for small circuit boards. - replaceable back probing tips.
- Note: For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life - back probe kit.
- It is recoverable. if the pin gets damaged or useless, just pull out the old pin and install the new one. - power probe pin.
- Sharp pin with small diameter makes it ideal for piercing the insulation of small gauge wires. - lisle back probe kit.
- Comes with 20 replacement pins, convenient to replace the damaged or useless one. - electrical probes.
Check StockHantek DSO2D10 2 CH Oscilloscope with Built-in DDS Generator, 100MHz 1GSa/s
- ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 400Hz Bandwidth, 1mV/10mA, 650A..
- ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
- ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms..
- ⚡【Application】1.Power circuit measurement and malfunction analysis.
- 2.Motor drive of frequency converter (or other electronics) measurement.
- 3.Power electronics equipments measurement..
- ⚡【What you will get】1*AC/DC Current clamp CC-650,1*English Manual..
Check StockHantek 6254BE Digital oscilloscope 250MHz Bandwidth Automotive Oscilloscopes Car-Detector 4 Channels 1Gsa/s USB PC Osciloscopio
- ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 20kHz Bandwidth, 1mV/10mA, 65A.
- ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
- ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms.
- ⚡【Application】1.Power circuit measurement and malfunction analysis.
- 2.Motor drive of frequency converter (or other electronics) measurement.
- 3.Power electronics equipments measurement..
- ⚡【What you will get】1*AC/DC Current clamp CC-65,1*English Manual..
Check StockMicsig DP10007 High Voltage Differential Probe Kit, Oscilloscope Probe Kit, 100MHZ 700V
- 【Maximum differential test voltage】 Comes with 70V-700V measurement range, you can safely measure up to 700V floating voltage and up to 100 MHz bandwidth..
- 【High voltage conversion】The testing probe kit can convert the input high voltage signal to low voltage signal for oscilloscope observation and analysis..
- 【Safer to use】High-impedance isolation between the sampling input and output of the high-voltage differential probe to protect personal safety..
- 【Multifunctional kit】All 6 pieces come with three different connectors, which are helpful for various tests on different occasions..
- 【Wide application】The attenuation rate is 10X/100X, which is widely used in most of oscilloscope..
Check StockHantek 2D72 2CH Handheld Oscilloscope Scopemeter with Waveform Generator, 70MHz 250MSa/s
- Professional Handheld Oscilloscope -- 120 MHz analog bandwidth,with an equivalent sampling rate of 500MSps. 3 trigger mode: Auto/Normal/Single. 4-position square wave signal output: 1kHz, 10kHz, 100kHz, 1MHz..
- Safety & Convenient Digital Oscilloscope -- The built-in high voltage protection module can withstand up to 400V continuous voltage and 800V peak voltage. Don't worry about the oscilloscope burnout caused by the high voltage not being probed to the 10X position..
- Proster Oscilloscope with HD 2.4" Color Screen: Display high-definition LCD screen with 2.4-inch 320×240 resolution. Extremely convenient and fast waveform storage function, can store up to 2500 waveform pictures. Powerful waveform file manager, support for thumbnail browsing, viewing, detail viewing, page turning, deletion and more..
- Portable Oscilloscope -- Backlight brightness:1~8 levels. Built-in lithium battery, about 8 hours standby time when fully charged. Protective silicone covers on both sides of the instrument, slip-resistant, drop-resistant and shock-resistant, comfortable hand feel..
- Professional Oscilloscope -- Accessories: 100MHz probe, charging cable, user manual,cloth bag. Suitable for home appliance inspection, automotive diagnostics, research and education, produc....
Check StockRigol MSO5074 - Four Channel, 70 MHz Digital/Mixed Signal Oscilloscope
- 70 MHz Digital Oscilloscope with 4 channels, 8GS/s, 100Mpoint memory.
- Four channel, 70 MHz digital / mixed signal oscilloscope.
- 100 Mpts memory depth, optional memory depth up to 200 Mpts.
- 16 digital channels included - requires optional PLA2216 logic probe to operate.
Check StockRigol MSO5104 - Four Channel, 100 MHz Digital/Mixed Signal Oscilloscope
- 100 MHz Digital Oscilloscope with 4 channels, 8GS/s, 100Mpoint memory.
- Four channel, 100 MHz digital / mixed signal oscilloscope.
- 100 Mpts memory depth, optional memory depth up to 200 Mpts.
- 16 digital channels included - requires optional PLA2216 logic probe to operate.
Check Stock