Categories

Best Otc Pilot Bearing Puller

ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS

  • Premium Quality: The slide hammer puller set is constructed from drop forged steel with a fully chromed carbon steel slide hammer for maximum strength and longevity that resists rust and corrosion..
  • Specifications of The Bearing Puller Set: Overall length 15''/382mm, bearing extractor collets with internal capacity from 3/8"/10mm to 1-1/4"/32mm, bearing extractor 3/8"/10mm to 1/2"/14mm, 9/16"/15mm to 11/16"/19mm. 5/8"/18mm to 1"/25mm, 1"/25mm to 1-1/4"/32mm..
  • Great Function: Open clamps by turning handle clockwise to snug against the bearing, the blind bearing puller is great for pulling out evenly without damage the parts..
  • Wide Application: This pilot bearing removal tool blind hole bearing puller is ideal for pulling jobs,against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use..
  • Storage Case: The slide hammer bearing puller is packed in a heavy-duty storage case with precision-sized compartments for every piece - great for storage and transport while lengthening....
Check Stock

Powerbuilt Pilot Bearing Puller, Remove Bearings and Bushings, Foreign and Domestic Car Repair, Storage Case - 648619

  • Made to be the most reliable tools in the market today.
  • Tool set for removal of the pilot bearing and bushings from the flywheel during clutch replacement.
  • Heavy duty puller with 1 1/2-Inch fingers for an extra deep reach.
  • Kit 8 includes 1-Piece for removal of pilot bearing and bushings from the flywheel during clutch replacement.
Check Stock

OTC Tools 6981 Blind Hole Puller Set with Storage Case

  • OTC's 6981 Blind Hole Puller Set is a versatile solution for blind or "hidden" bearings in machinery and equipment commonly found on the factory floor....
  • Innovative expanding collets are placed through the bore of part to be removed then expanded with an actuator pin so that the lips of the collet....
  • The unique design of the pin adapter allows the option of using a slide hammer to pop the bearing or bushing from it's seat, or use with a pulling....
  • 5 Collet/Pin combinations: .300 to .350 inch (1.5 inches reach), .350 to .438 inch (1.5 inches reach), .438 - .563 inch (1.75 inches reach), .563 -....
  • Forged and/or machined at OTC's factory in Owatonna, MN.
  • includes easy to read component application chart and instructions.
Check Stock

OTC 1039 13-Ton 'Grip-O-Matic' Puller - 2 Jaw (Mechanical)

  • OTC's 13-ton capacity, 2-jaw, gear and bearing puller enables you to remove and install parts for fast, effective repairs.
  • Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity.
  • Center screw size - 13/16-16 x 12 inches long.
Check Stock

OTC 4579 9-Way Slide Hammer Puller Set , Black

  • OTC's 9-Way Slide Hammer Puller Set is ideal for pulling flange-type rear axles and most front-wheel drive hubs.
  • Internal and external jaws provide a variety of combinations to pull bearings, gears, and seals.
  • Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs.
  • Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.
  • Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments.
  • Enjoy special OTC Tools promotions, offers, and exclusive product rebates on auto tools – see more details in the offer flyer in the photos section of this listing.
Check Stock

KELEN Blind Bearing Puller Tool, Blind Inner Internal Bearing Puller,Blind Hole Bearing Puller Set, Slide Hammer Removal Tool Set 5Pcs

  • The blind bearing puller is designed for removing out blind holes bushes and bearings from blind housings without any damage of your vehicles.You can do dent repair, lock pull or bearing pull on a scooter or any small machine..
  • Open clamps by turning handle clockwise to snug against the bearing for pulling out evenly without damage the parts..
  • Bearing Extractor Collets With Internal Capacity From 3/8 inches (10mm) To 1-1/4 inches (32mm),15 inches (382mm) Overall Length..
  • Blind bearing puller, blind hole bearing puller,blind inner internal bearing puller,inner bearing puller set,blind inner bearing puller set,blind bearing puller kit,blind bearing puller set,blind bearing puller tool,blind hole bearing puller set,blind hole bearing puller kit..
  • Includes puller/slide hammer, 4 adapters 12 - 32 mm and carry case.Ideal Replacement for pulling jobs.Satisfaction d. If not completely satisfied, return it to us for a no-hassle refund or credit..
  • Part number: Blind Bearing Puller Tool 5PCS.
Check Stock

OTC 7070A Transmission Bearing Service Set for Heavy-Duty Fuller Transmissions

  • OTC's Transmission Bearing Service Set is designed to help you remove input shaft bearings and countershaft bearings, in both the main and auxiliary....
  • Also removes end yokes from 1600/1610-1810 series transmissions.
  • Puller delivers 10 tons of mechanical power - essential force for working on big gearboxes.
  • For use on Fuller twin countershaft transmissions: 125, 600, 660, 900, 9500, 1100, 12500, 12600, 13000, 14600, 15600, and 8600 series, 910-913, 915,....
  • High-grade materials ensure quality performance over the lifetime of the tools.
Check Stock

OTC 1022 2-Ton Reversible Jaw 'Grip-O-Matic' Puller - 2 Jaw (Mechanical)

  • OTC's 2-ton capacity, 2-jaw, reversible gear and bearing puller enables you to remove and install parts for fast, effective repairs.
  • Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity.
  • Upper jaw thickness - 3/16 inch, lower jaw thickness - 1/8 inch.
  • upper jaw width - 1/4 inch, lower jaw width - 1/2 inch.
  • Center screw size - 3/8-24 x 4-7/8 inches long.
Check Stock

Sunluway 6575 Hub Grappler Kit for on Vehicle Wheel Hub and Bearing Removal & Installation

  • 【UNIVERSAL FITS】 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..
  • 【FUNCTION】This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
  • 【PERFORMANCE】Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners.
  • 【EASY TO USE】 With 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation. Easy to remove and install the front hub and bearing .Comes with Operation Manual..
  • 【A MUST HAVE】The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time..
Check Stock

OTC 4581 Slide Hammer and Blind Hole Bearing Puller Set

  • The OTC blind hole bearing puller set is for those jobs requiring an internal pull.
  • set includes four collets sizes 7/16 inch to 1/2 inch, 9/16 inch to 11/16 inch, 5/8 inch to 1 inch, and 1 inch to 1-1/4 inch which fit a wide range of applications.
  • Select the appropriate sized collet by comparing it with the application. Insert the collet, expand it to fit the hole, and then attach the slide hammer.
  • Includes a 2-1/2 pound slide hammer with a T-handle.
  • Blow-molded plastic storage case keeps set contents organized and protected from loss.
Check Stock

SR Performance Clutch Alignment Tool; 10 Spline

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.
Check Stock

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

Prokomon 13 Pcs Embedded Bearing Puller Kit for 6004-6010 6201-6206 6300-6302 Insert Wheel Bearing Removal Tool with 6 Pcs Ball Ended Threaded Puller Adaptors

  • ◇ Embedded Bearing Puller --- The bearing puller is used to dismantle automotive bearings. When a normal puller cannot remove the bearing, using this tool can help you complete the removal task..
  • ◇ Applicable ISO Bearing Sizes ---The wheel bearing removal tool is suitable for ISO bearings of sizes 6004-6010,6201-6206 and 6300-6302..
  • ◇ High Quality Materials --- Bearing puller tools are made of hardened and tempered steel, chemically plated black for excellent corrosion resistance and improved service life, providing you with long service..
  • ◇ Easy To Use --- First choose the right slider, put the slider into the bearing housing ring, rotate it 90 degrees, install the right post, then install the crossbeam and the top screw, turn the screw clockwise and pull out the bearing..
  • ◇ 13 Pcs Set--- Bearing removal tool pack contains centre screw thread cap,6 x ball ended threaded puller adaptors,2xleg extensions,and puller yoke with centre screw and twin arms..
Check Stock